Pass4TestはIT試験問題集を提供するウエブダイトで、ここによく分かります。最もよくて最新で資料を提供いたします。こうして、君は安心で試験の準備を行ってください。弊社の資料を使って、１００％に合格を保証いたします。もし合格しないと、われは全額で返金いたします。
Pass4Testは我々が研究したトレーニング資料を無料に更新します。それはあなたがいつでも最新のHP2-K36試験トレーニング資料をもらえるということです。HP2-K36認定試験の目標が変更されば、Pass4Testが提供した勉強資料も変化に追従して内容を変えます。Pass4Test は各受験生のニーズを知っていて、あなたがHP2-K36認定試験に受かることに有効なヘルプを差し上げます。あなたが首尾よく試験に合格するように、我々は最も有利な価格と最高のクオリティーを提供して差し上げます。
IT業種で仕事している皆さんが現在最も受験したい認定試験はHPの認定試験のようですね。広く認証されている認証試験として、HPの試験はますます人気があるようになっています。その中で、HP2-Z26認定試験が最も重要な一つです。この試験の認定資格はあなたが高い技能を身につけていることも証明できます。しかし、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。Pass4TestはHP2-Z26認定試験に合格することを助けてあげますから。
どのようにすればもっと楽にHPのHP2-Z26認定試験に合格することができるかについて考えたことがありますか。試験に合格する秘密を見つけましたか。それを行う方法がわからない場合、私は教えてあげましょう。実際には、認定試験に合格できる方法が多くあります。試験に関連する知識を一生懸命習得することがただ一つの方法です。今はそのようにしていますか。しかし、これが一番時間を無駄にして、望ましい効果を得られない方法です。それに、毎日仕事で忙しいあなたは、恐らく試験に準備する充分な時間がないでしょう。では、Pass4TestのHP2-Z26問題集を試しましょう。この試験参考書はきっとあなたに思えぬ良い結果を与えられます。
試験番号：HP0-J66試験科目：「HP Storage Migration」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-06-25
問題と解答：全75問 HP0-J66 練習問題
試験番号：HP2-K36試験科目：「Support and Service HP StoreVirtual Solutions」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-06-25
問題と解答：全46問 HP2-K36 認定資格
試験番号：HP2-Z26試験科目：「Fast Track - Implementing HP Network Technologies」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-06-25
問題と解答：全58問 HP2-Z26 資格認定
Pass4TestのHP2-K36試験参考書はあなたを一回で試験に合格させるだけでなく、HP2-K36認定試験に関連する多くの知識を勉強させることもできます。Pass4Testの問題集はあなたが身に付けるべき技能をすべて含んでいます。そうすると、あなたは自分自身の能力をよく高めることができ、仕事でよりよくそれらを適用することができます。Pass4Test的HP2-K36問題集は絶対あなたがよく試験に準備して、しかも自分を向上させる一番良い選択です。Pass4Testがあなたに美しい未来を与えることができることを信じてください。
Pass4Testは初めて試験を受けるあなたが一回で試験に合格して、認証資格を取ることを保証します。Pass4Testが提供して差し上げたのは高品質のHPのHP2-Z26「Fast Track - Implementing HP Network Technologies」模擬問題集で、あなたがステップバイステップで試験に準備する手順を指導しています。Pass4TestのHPのHP2-Z26試験問題集は絶対あなたに成功をもたらすことを保証します。Pass4TestのHPのHP2-Z26認定試験に準備するために色々な方法がありますが、
多くのIT業界の友達によるとHP認証試験を準備することが多くの時間とエネルギーをかからなければなりません。もし訓練班とオンライン研修などのルートを通じないと試験に合格するのが比較的に難しい、一回に合格率非常に低いです。Pass4Testはもっとも頼られるトレーニングツールで、HPのHP0-J66認定試験の実践テストソフトウェアを提供したり、HPのHP0-J66認定試験の練習問題と解答もあって、最高で最新なHPのHP0-J66認定試験「HP Storage Migration」問題集も一年間に更新いたします。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/HP0-J66.html
NO.1 Your customer has an existing HP StoreServ 7400 with four controllers. The array has only SSD
drives installed. What should you consider when sizing a solution which includes Adaptive
Optimization?
A. Ensure that 3% of the capacity and 30% of the performance can be delivered by the SAS disks.
B. Include SAS 10/15K disks in the configuration.
C. Add SSDs or nearline disks to a single node pair.
D. Size the nearline tier for 30% of the performance requirement.
Answer: B
HP虎の巻 HP0-J66通信 HP0-J66練習問題 HP0-J66合格率 HP0-J66
Explanation:
Note:
*SAS stands for Serial Attached SCSI. Basically, a SAS drive utilizes the same form factor as a
SATA drive but has several high performance advantages. First of all, there's the platter speed.
While typical SATA drives operate at 7200RPM, a SAS drive operates at 10K or 15K. Although the
platter speed is double that of SATA, the MTBF (Mean Time Before Failure) remains at the
industry standard of 1.2 million hours.
*Make sure to define tier 0 to be on a higher performance level than tier 1, which in turn should be
higher performance than tier 2. For example, you may choose RAID 1 with SSDs for tier 0, RAID 5
with FC drives for tier 1 and RAID 6 with NL or SATA drives for tier 2.
*Best practices encourage you to begin your Adaptive Optimization configurations with your
application CPG starting with tier 1. For example, tier 1 could be CPG using your FC or SAS physical
disks. This allows you to add both higher and lower tier capabilities at a later date. If you don't have
higher or lower tier, you can add either or both at a later date by using a new CPG, such as tier 0
using SSDs or tier 2 using NL. Or, you could have CPG tiers with RAID 1 or RAID 5 and RAID 6. The
main point is that you should begin with middle CPG tier 1 when configuring Adaptive Optimization
with your application.
* Example: HP 3PAR Adaptive Optimization moved ~33 percent of the IOPS workload to the SSD
drives even though that involved moving only 1 percent of the space. Performance improved in two
ways: the 33 percent of the IOPS that were serviced by SSD drives got very good latencies (~2 ms),
and the latencies for the NL drives also improved (from ~40 ms to ~15 ms). Moreover, the
investment in the 16 SSD drives permitted them to add even more NL drives in the future, because
the SSD drives have both space and performance headroom remaining.
Reference;Adaptive Optimization for HP 3PAR StoreServ Storage
NO.2 As part of an upgrade of their existing infrastructure, a customer is considering replacing their
Fibre Channel host bus adapters (HBAs) and Ethernet converged network adapters (CNAs).
How can they expect to improve efficiency through this upgrade?
A. 3:1 port consolidation
B. path failover redundancy
C. greater aggregate throughput
D. cable reduction up to 75%
Answer: A
HP虎の巻 HP0-J66種類 HP0-J66フリーク HP0-J66フリーク HP0-J66参考書
Explanation:
The HP Dual Port Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet,
iSCSI, and Fibre Channel (FC) connectivity over 10GbE using both Fibre Channel over Ethernet (FCoE)
and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre
Channel onto a converged network adapter, HP CNAs reduce the number of separate adapters and
cables required for your datacenter and also reduce operational, power and cooling costs while
preserving existing Ethernet and Fibre Channel infrastructure.
NO.3 A customer with multiple HP 3PAR P10000 Storage Systems needs to move data between the
arrays. They need to ensure that the migration will not disrupt their applications, users, or services.
Which storage method should the customer use to achieve this goal?
A. point-in-time copies
B. backups to disk
C. storage federation
D. deduplication
Answer: C
HP日記 HP0-J66教材 HP0-J66問題集 HP0-J66特典
Explanation:
Storage federation from HP enables the online non-disruptive movement of storage volumes
between arrays in a metro area. Unlike external storage virtualization appliances that add cost,
complexity and downtime, storage federation from HP creates a persistent pool of capacity using
native communication between system controllers.
NO.4 A customer is planning to migrate their master database to a remote location. Their network
uses GbE for FCIP tunneling. Which Fibre Channel switch port interface must they use?
A. EX_Port
B. E_Port
C. VEX_Port
D. VE_Port
Answer: D
HP HP0-J66 HP0-J66教本 HP0-J66 HP0-J66難易度
Explanation:
*VE_Port-Virtual E_Port used with a GbE port for FCIP tunneling
*You can configure a Fibre Channel port as an F_Port, FL_Port, E_Port, or EX_Port (Fibre Channel
routing),and configure a GbE port as a VE_Port (FCIP) or VEX_Port (FCIP with Fibre Channel routing).
NO.5 What are the benefits of migrating to an HP 3PAR StoreServ 7000?
A. Virtualizationof homogenous storage devices
B. increased efficiency through reduced capacity requirements
C. multi-tier storage availability in hyperscale enterprise platform
D. federated non-disruptive data mobility between third-party systems
Answer: D
HP問題集 HP0-J66費用 HP0-J66ふりーく HP0-J66学習
Explanation:
HP 3PAR StoreServ 7000 Storageisthe only platform that offers the performance required to double
virtual machine (VM) density on your physical servers-guaranteed.
Store all of your data on a single system that supports advanced features such as storage federation
and automated tiering and enables you to start small and grow without disruption.
NO.6 A customer is planning to migrate from an HP EVA to an HP 3PAR StoreServ 7000 Storage
System The customer uses disk groups on the EVA for fine-grained database management.
What can the customer use to achieve fine-grained database management on the HP 3PAR
StoreServ 7000?
A. logical volumes
B. common provisioning groups
C. disk groups
D. virtual volumes
Answer: B
HP関節 HP0-J66虎の巻 HP0-J66番号
Explanation:
Terminology comparison between EVA and HP 3PAR StoreServ EVA P6000:Disk Group HP 3PAR
StoreServ:Common Provisioning Group (CPG)
NO.7 A customer needs to migrate data to a new database environment. They need to make a
physical copy of their data that can be presented to the new environment with the highest level of
availability. Which form of replication should the customer use?
A. backups to disk
B. snapshots
C. clones
D. asynchronous replication
Answer: C
HP HP0-J66 vue HP0-J66ガイド HP0-J66対策
Explanation:
Incorrect: Not B:A storage snapshot is a set of reference markers, or pointers, to data stored on a
disk drive, on a tape, or in a storage area network (SAN). A snapshot is something like a detailed
table of contents, but it is treated by the computer as a complete data backup. Snapshots
streamline access to stored data and can speed up the process of data recovery. There are two main
types of storage snapshot, called the copy-on-write (or low-capacity) snapshot and the split-mirror
snapshot. Utilities are available that can automatically generate either type.
9. A customer needs to replicate data from a remote location to an HP StoreOnce B6200 Backup.
A. The HP D2D sizing tool should be usedto size link speed and understand concurrency restraints.
B. Concurrency control should be used if the replication isnot run at the same times as backups and
housekeeping jobs.
C. Separate replication jobs should be created for each datatype.
D. Backups and housekeeping jobs should berun in thereplication window.
Answer: A
HP教育 HP0-J66講座 HP0-J66独学
Explanation:
The replication best practices that apply to HP StoreOnce D2D Backup Systems are
equally as valid for the HP B6200 StoreOnce Backup System.
Best practices include:
*Use the Sizing tool to size replication link speed and understand replication concurrency
restraints.
Reference; HP B6200 Backup System, Recommended Configuration Guidelines
10. In which HP rack is the factory Integration of an HP StoreServ 7000 supported?
A. HP 5642 rack
B. HP G3 rack
C. HP 10000 rack
D. HPV142 rack
Answer: C
HP問題集 HP0-J66 HP0-J66初心者 HP0-J66 HP0-J66内容
Explanation:
Choose Racking Options The HP 3PAR StoreServ 7000 is compatible with most industry standard
4-post EIA 19 inch racks with square mounting holes, including the HP Intelligent Series Rack and
the HP 10000 G2 Series Rack. The HP 3PAR StoreServ 7000 can be factory configured and shipped in
a rack or shipped without a rack for field integration into an existing rack. The rack used for factory
integration is the HP Intelligent Series Rack.
NO.8 A customer needs to be able to recover their data in the event of a site failure.
They have a strict recovery point objective for their business-critical applications.
Which technique should the customer use?
A. snapshots
B. backups to tape
C. backups to disk
D. remote replication
Answer: D
HP受験記 HP0-J66認定資格 HP0-J66 HP0-J66一発合格 HP0-J66方法 HP0-J66学習
Explanation:
Need replication to get the data to a backup site.
Note:
*Recovery Point Objective (RPO) refers to the required point-in-time to which a DR solution
canrestore the state of data for a particular service, for example, how much data loss is
acceptablefollowing a disaster. These requirements can range from "close to zero" data loss (for
high-valuefinancial transactions, for example) to some small number of minutes of the most recent
没有评论:
发表评论