アンケート調査によると、IT業種の皆さんが現在最も受験したい認定試験はHPのHP0-J62試験だそうです。確かに、この試験はとても大切な試験で、公的に認可されたものです。しかも、この認定資格があなたが高い技能を身につけていることも証明できます。しかしながら、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。Pass4Testはあなたに難しいHP0-J62認定試験に合格することを助けてあげますから。
HPのHP0-J67認証試験のために少ないお金でよい成果を取られるのPass4Testのは最良の選択でございます。Pass4Testは例年試験内容を提供したあなたに後悔しないように価値があるサイトだけではなく、無料の一年更新サービスも提供するに最も賢明な選択でございます。
長年にわたり、Pass4TestはずっとIT認定試験を受験する皆さんに最良かつ最も信頼できる参考資料を提供するために取り組んでいます。IT認定試験の出題範囲に対して、Pass4Testは豊富な経験を持っています。また、Pass4Testは数え切れない受験生を助け、皆さんの信頼と称賛を得ました。ですから、Pass4TestのHP0-J67問題集の品質を疑わないでください。これは間違いなくあなたがHP0-J67認定試験に合格することを保証できる問題集です。Pass4Testは試験に失敗すれば全額返金を保証します。このような保証があれば、Pass4TestのHP0-J67問題集を購入しようか購入するまいかと躊躇する必要は全くないです。この問題集をミスすればあなたの大きな損失ですよ。
試験番号：HP0-J62試験科目：「HP Storage Solutions Foundation」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-06-25
問題と解答：全93問 HP0-J62 受験記対策
試験番号：HP0-J67試験科目：「Architecting Multi-site HP Storage Solutions」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-06-25
問題と解答：全121問 HP0-J67 最新な問題集
HPのHP0-J67認定試験に受かるのはあなたの技能を検証することだけでなく、あなたの専門知識を証明できて、上司は無駄にあなたを雇うことはしないことの証明書です。当面、IT業界でHPのHP0-J67認定試験の信頼できるソースが必要です。Pass4Testはとても良い選択で、HP0-J67の試験を最も短い時間に縮められますから、あなたの費用とエネルギーを節約することができます。それに、あなたに美しい未来を作ることに助けを差し上げられます。
Pass4Testはあなたが完全に信頼できるウェブサイトです。受験生の皆さんをもっと効率的な参考資料を勉強させるように、Pass4TestのIT技術者はずっとさまざまなIT認定試験の研究に取り組んでいますから、もっと多くの素晴らしい資料を開発し出します。一度Pass4TestのHP0-J67問題集を使用すると、きっと二度目を使用したいです。Pass4Testは最高のHP0-J67資料を提供するだけでなく、高品質のサービスも提供します。私達の資料についてどんなアドバイスがあってもお気軽に言ってください。受験生の皆さんを試験に合格させることを旨とするだけでなく、皆さんに最高のサービスを提供することも目標としています。
Pass4TestのHP0-J62問題集には、PDF版およびソフトウェア版のバージョンがあります。それはあなたに最大の利便性を与えることができます。いつでもどこでも問題を学ぶことができるために、あなたはPDF版の問題集をダウンロードしてプリントアウトすることができます。そして、ソフトウェア版のHP0-J62問題集は実際試験の雰囲気を感じさせることができます。そうすると、受験するとき、あなたは試験を容易に対処することができます。
他のたくさんのトレーニング資料より、Pass4TestのHPのHP0-J67試験トレーニング資料は一番良いものです。IT認証のトレーニング資料が必要としたら、Pass4TestのHPのHP0-J67試験トレーニング資料を利用しなければ絶対後悔しますよ。Pass4Testのトレーニング資料を選んだら、あなたは一生で利益を受けることができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/HP0-J67.html
NO.1 You are tuning a customer HP StoreOnce Backup System and notice they are running backups
20 hours a day. As a result, backup jobs are running during the same time as replication jobs. What
can you do to limit the available bandwidth and not saturate the link with replication traffic?
A. Enable multiplexing and set concurrency to 1.
B. Enable concurrency control.
C. Map multiple source libraries into a single target library.
D. Enable compression.
Answer: B
HP体験 HP0-J67 HP0-J67攻略 HP0-J67日記 HP0-J67関節 HP0-J67
Explanation:
Hewlett-Packard StoreOnce B6000 Configuration Manual Page 40: "7. The use of "concurrency
control" is not necessary if replication is run at separate times from backups and housekeeping.
However, if the customer wants to run replication at the same time as backups or housekeeping,
they can use concurrency control to limit the available bandwidth so as not to saturate the link with
replication traffic"
NO.2 Your customer wants to replicate backup data from branch offices to a primary data center
where an HP StoreOnce 4430 Backup System using HP StoreOnce Catalyst is located. The main
backup application is HP Data Protector 7.01. The file and application servers have Windows 2003,
Windows 2008, and SUSE Linux 9 and 10 installed. The file and application servers are a mixture of
32 and 64 bit Windows and Linux operating systems. As a long-term strategy, thecustomer wants to
migrate all services to the primary data center. No additional hardware can be purchased for the
branch offices, and complexity should be minimized.
Which deduplication type is optimal for this customer?
A. source-side
B. application-side
C. target-side
D. server-side
Answer: D
HP模擬 HP0-J67 HP0-J67学校 HP0-J67講座
Explanation:
Target-side NOT: "Target-side Deduplication can be used for conventional B2D environments where
full bandwidth links are used between the media server and the Deduplicated Data Store."
Application-side NOT exist. Source-side NOT: Limited agents for OS to use Source-side. 32bits not
compatible. "Note that the backed up system must support deduplication (64-bit Windows systems
or 64-bit Linux systems only, for details, see the support matrices)." Server-side: "Note that the
Media Agent client must support deduplication (64-bit Windows systems or 64-bit Linux systems
only, for details, see the support matrices). Server-side deduplication enables you to deduplicate
data from clients on which deduplication is not supported locally."
7. The customer has two HP 3PAR StoreServ 7000 Storage systems split between two data
centers. Used capacity of each storage system is 10 TB of data. The replication between data centers
is performed via Ethernet/IP , and the replication technology used will be asynchronous. The
maximum RPO is 30 minutes, and the daily change rate of the customer data is a maximum of 0.5%,
which is created evenly throughout the day.
What is the required minimum bandwidth between the data centers for replication?
A. 40 Mb half-duplex
B. 20 Mb full-duplex
C. 5 Mb half-duplex
D. 10 Mb full-duplex
Answer: D
HP虎の巻 HP0-J67体験 HP0-J67資格 HP0-J67内容
8. During an HP customer assessment workshop, the Alinean report shown in the exhibit is
created. Which cost saving should you highlight in your presentation when positioning the value of
HP 3PAR StoreServ Thin Technologies?
A. planned downtime
B. unplanned downtime
C. application integration
D. power and cooling
Answer: A
HP模擬 HP0-J67難易度 HP0-J67体験 HP0-J67
9. A customer has an environment spanning two data centers in a campus environment. The
primary storage is an HP 3PAR StoreServ 10400 Storage System. Data is replicated between sites
with an RPO of zero. The customer is questioning whether they have adequate protection. You
suggest creating a DR site and actively replicate the data to it.
What are the implications of adding the third data center to the data network?
A. 10GbE links are needed to interconnect the HP StoreServ 3PAR arrays.
B. The data network must support Converged Enhanced Ethernet.
C. The data network must support OpenStack.
D. A dedicated subnet must be added to interconnect the 3PAR arrays.
Answer: D
HPふりーく HP0-J67教科書 HP0-J67過去 HP0-J67テスト HP0-J67認定証
10. A customer has an environment that spans two data centers in a campus environment. The
primary storage is HP 3PAR 10400, and data is replicated between sites with an RPO of zero.
Recent bad weather has caused flooding near the customer site and the customer is questioning
whether they have adequate protection. You suggest creating a data center at a remote location
and actively replicating the data to it. The customer is concerned that the remote link to the third
site will have insufficient bandwidth and will create a local replication bottleneck.
Which statement addresses the customer concerns?
A. Synchronous Long Distance will schedule data replication outside high latency periods autonomic
array
B. Data is transmitted in a continuous stream with write order being handled by the target array.
C. Remote Copy uses multiple connections over the same link from multiple volumes.
D. Over provisioning of the remote link will ensure enough bandwidth is always available for
replication.
Answer: C
HP費用 HP0-J67勉強法 HP0-J67教科書 HP0-J67割引
11. You are performing a demo of an HP StoreOnce 2620i Backup System solution in combination
with HP Data Protector. All best practice guidelines for the VTL and Data Protector have been
adhered to. However, you receive the following error when formatting a cartridge in a
previously-created VTL.
[Normal] From: MMA@demo.local "Drive_Demo" Time: 4 / 23 / 2013 10:26:09 PM
Tape0:0:0:0C
Initializing new medium: "[4E94F289] 4E94F289"
[Major] From: MMA@demo.local "Drive_Demo" Time: 4 / 23 / 2013 10:26:10 PM [90:51]
Tape0:0:0:0C
Cannot write to device ([87] Wrong parameter. )
[Major] From: MMA@demo.local "Drive_Demo" Time: 4 / 23 / 2013 10:26:10 PM
Initialization of medium failed.
[Normal] From MMA@demo.local "Drive_Demo" Time: 4 / 23 / 2013 10:26:14 PM
Ejecting medium Tape0:0:0:0C".
What must you do to perform a successful demo?
A. Add an iSNS-Server in the media Server iSCSI configuration, and restart the iSCSI service.
B. Disable "Automatically discover changed SCSI address" for the VTL drives, and rescan the library.
C. Disable "SCSI Reserve /Release (drive)" for all of the drives and robotics in the environment and
rescan the library.
D. Change the maximum transfer length of the iSCSI initiator in regedit. and restart the media server.
Answer: C
HP資格 HP0-J67 HP0-J67 HP0-J67内容 HP0-J67練習問題
12. A customer with a B-Series fabric needs to establish FC-IP connectivity between their primary
data center fabric and DR data center fabric to enable replication. However, they are concerned that
fabric instability issues in the DR fabric will cause issues in their production fabric.
Which HP storage solution should you recommend?
A. HP C-Series MDS 9222i Multiservice Modular Fabric Switch
B. HP 1606 Extension SAN Switch
C. HP SN6000 FC Switch
D. HP MPX200 Multifunction Routed
Answer: D
HP勉強法 HP0-J67学校 HP0-J67入門 HP0-J67特典 HP0-J67虎の巻
13. Which HP 3PAR StoreServ feature improves storage array resiliency?
A. Persistence Ports
B. Virtual Lock
C. Virtual Copy
D. Virtual Domains
Answer: A
HP取得 HP0-J67 HP0-J67教本 HP0-J67認定資格 HP0-J67攻略
Explanation:
"To provide greater resiliency and to avoid dependency on host multi-pathing software, HP 3PAR
StoreServ has introduced a new feature called Persistent Ports." - in HP 3PAR High Availability
14. You are designing a storage solution for a customer concerned about storage availability
during code upgrades. Which HP 3PAR Port Persistence node identity handles host I/O requests,
thus providing greater resiliency during code upgrades?
A. Guest
B. Master
C. Slave
D. Native
Answer: A
HP問題集 HP0-J67 HP0-J67
Explanation:
Persistent Ports This is a really cool feature as well - it gives the ability to provide redundant
connectivity to multiple controllers on a 3PAR array without having to have host-based multipathing
software.How is this possible? Basically it is NPIV for the array. Peer controllers can assume the
world wide names for the ports on their partner controller.
If a controller goes down, it's peer assumes the identities of that controller's ports, instantaneously
providing connectivity for hosts that were (not directly) connected to the ports on the downed
controller. This eliminates pauses for MPIO software to detect faults and fail over, and generally
makes life a better place.
15. A customer asks you to architect a new SAN fabric infrastructure comprised of redundant
fabrics for a test/dev server environment. They need to provide selective connectivity for
array-based snapshots from disk arrays hosted on the existing Cisco MDS 9506 Multilayer
director-based production fabric, to hosts on the test/dev fabric. A customer requirement is to
utilize a differentvendor for the test/dev fabric, Which SAN technology enables the test/dev SAN
fabric to maintain interoperability between the two fabrics and meet the stated requirements?
A. HP B-Series with Transparent Router (TR)
B. HP H-Series with Transparent Router (TR)
C. HP B Series with Inter-VSAN Routing (iVR)
D. HP H-Series with Inter-Fabric Routing (IFR)
Answer: B
HP HP0-J67書籍 HP0-J67教育 HP0-J67認定試験 HP0-J67
NO.3 Your customer wants to upgrade their existing HP 3PAR S-Class array. A competitor has
suggested a non-HP storage array. Your conversation with the customer focuses on the notable
architectural enhancements within the new generation of HP 3PAR StoreServ 7400 platforms.
Which enhancements should you focus on? (Select two.)
A. The tightly coupled cache-coherent clustering is built into the Gen4 ASIC.
B. The 64-bit OS enables scalable headroom for performance and capacity.
C. Logical Disk regions have increased from 256 MB and are now 1 GB in size.
D. Write cache mirroring is now implemented N+N across the 7x00 controllers.
E. New HP StoreServ 7x00 now supports 16Gb Fibre Channel speeds.
Answer: A,D
HP勉強法 HP0-J67初心者 HP0-J67過去問
NO.4 Your customer is migrating to VMware vSphere 5. Your solution includes HP 3PAR StoreServ
Storage with licenses for Remote Copy and sub-LUN tiering. The customer is interested in
implementing VMware Storage I/O Control and asks if there are any interoperability concerns with
your solution.
How does the inclusion of VMware Storage I/O Control impact your solution?
A. VMware Storage I/O Control integrates into the proposed solution with no changes.
B. HP 3PAR Application Software Suite for VMware must be added to the solution
C. HP 3PAR Adaptive Optimization cannot be used in the solution.
D. VMware Adaptive Queue Depth Throttling must be enabled.
Answer: A
HP方法 HP0-J67クラムメディア HP0-J67スクール HP0-J67
NO.5 You are discussing cost reduction quality management, and business growth with a client.
According to industry best practices, which CxO are you meeting with?
A. CFO
B. CIO
C. COO
D. CEO
Answer: D
HP独学 HP0-J67内容 HP0-J67勉強法 HP0-J67 HP0-J67
NO.6 You need to ensure data integrity on physical disks within the proposed HP 3PAR StoreServ
Storage array.
Which HP 3PAR StoreServ Storage component calculates the value of the disk T10 Data Integrity
Feature (DIF)?
A. HP Service Processor
B. HP InServ Controllers CPUs
C. Controller Cache Algorithm
D. HP 3PAR Gen4 ASIC
Answer: D
HP費用 HP0-J67 HP0-J67一発合格 HP0-J67教科書
Explanation:
In "The HP 3PAR Architecture"
没有评论:
发表评论