Pass4Testの助けのもとで君は大量のお金と時間を费やさなくても復楽にOracleの1Z0-060認定試験に合格のは大丈夫でしょう。ソフトの問題集はPass4Testが実際問題によって、テストの問題と解答を分析して出来上がりました。Pass4Testが提供したOracleの1Z0-060の問題集は真実の試験に緊密な相似性があります。
Pass4Testのシニア専門家チームはOracleの1Z0-060試験に対してトレーニング教材を研究できました。Pass4Testが提供した教材を勉強ツルとしてOracleの1Z0-060認定試験に合格するのはとても簡単です。Pass4Testも君の１００％合格率を保証いたします。
1Z0-060試験はOracleのひとつの認証試験でIT業界でとても歓迎があって、ますます多くの人が1Z0-060認証試験に申し込んですがその認証試験が簡単に合格できません。準備することが時間と労力がかかります。でも、Pass4Testは君の多くの貴重な時間とエネルギーを節約することを助けることができます。
Pass4Testが提供する真実と全面的なOracle認証試験について資料で100%で君の試験に合格させてまたあなたに1年無料のサービスを更新し、今はPass4Testのインターネットで無料のOracleの1Z0-060認証試験問題集のソフトウェアがダウンロード することができます。
弊社は強力な教師チームがあって、彼たちは正確ではやくて例年のOracle 1Z0-060認定試験の資料を整理して、直ちにもっとも最新の資料を集めて、弊社は全会一緻で認められています。Oracle 1Z0-060試験認証に合格確率はとても小さいですが、Pass4Testはその合格確率を高めることが信じてくだい。
試験番号：1Z0-060問題集
試験科目：Oracle 「Upgrade to Oracle Database 12c」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-01-22
問題と解答：全150問
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/1Z0-060.html
NO.1 Which two statements are true about the use of the procedures listed in the
v$sysaux_occupants.move_procedure column?
A. The procedure may be used for some components to relocate component data to the SYSAUX
tablespace from its current tablespace.
B. The procedure may be used for some components to relocate component data from the SYSAUX
tablespace to another tablespace.
C. All the components may be moved into SYSAUX tablespace.
D. All the components may be moved from the SYSAUX tablespace.
Answer: B,D
Oracle認定試験 1Z0-060 1Z0-060認定試験
Explanation:
V$SYSAUX_OCCUPANTS displays SYSAUX tablespace occupant information.
MOVE_PROCEDURE:Name of the move procedure; null if not applicable
For example, the tables and indexes that were previously owned by the system user can now be
specified for a SYSAUX tablespace. You can query the v$sysaux_occupants view to find the exact
components stored within the SYSAUX tablespace.
NO.2 Which Oracle Database component is audited by default if the unified Auditing option is
enabled?
A. Oracle Data Pump
B. Oracle Recovery Manager (RMAN)
C. Oracle Label Security
D. Oracle Database Vault
E. Oracle Real Application Security
Answer: E
Oracle 1Z0-060過去問 1Z0-060 1Z0-060 1Z0-060
Explanation:
Type ofUnifiedauditing:
Standard
Fine Grained Audit
XS
Database Vault(not D)
Label Security(not C)
RMAN AUDIT(not B)
Data Pump(not A)
Note:
*Oracle 12c introduces Unified Auditing, which consolidates database audit records
including :-
DDL, DML, DCL
Fine Grained Auditing (DBMS_FGA)
Oracle Database Real Application Security
Oracle Recovery Manager
Oracle Database Vault
Oracle Label Security
Oracle Data Mining
Oracle Data Pump
Oracle SQL*Loader Direct Load
NO.3 Examine the followingcommands forredefininga table withVirtual Private Database(VPD)
policies:
Which two statements are true about redefining the table?
A. All the triggers for the table are disabled without changing any of the column names or column
types in the table.
B. The primary key constraint on the EMPLOYEES table is disabled during redefinition.
C. VPD policies are copied from the original table to the new table during online redefinition.
D. You must copy the VPD policies manually from the original table to the new table during online
redefinition.
Answer: B,C
Oracle 1Z0-060練習問題 1Z0-060
Explanation:
C (not D):CONS_VPD_AUTO Used to indicate to copy VPD policies automatically
*DBMS_RLS.ADD_POLICY /The DBMS_RLS package contains the fine-grained access control
administrative interface, which is used to implement Virtual Private Database (VPD).DBMS_RLS is
available with the Enterprise Edition only.
Note: *CONS_USE_PK and CONS_USE_ROWID are constants used as input to the "options_flag"
parameter in both the START_REDEF_TABLE Procedure and CAN_REDEF_TABLE Procedure.
CONS_USE_ROWID is used to indicate that the redefinition should be done using rowids while
CONS_USE_PK implies that the redefinition should be done using primary keys or pseudo-primary
keys (which are unique keys with all component columns having NOT NULL constraints).
*DBMS_REDEFINITION.START_REDEF_TABLE
To achieve online redefinition, incrementally maintainable local materialized views are used. These
logs keep track of the changes to the master tables and are used by the materialized views during
refresh synchronization.
*START_REDEF_TABLE Procedure Prior to calling this procedure, you must manually create an empty
interim table (in the same schema as the table to be redefined) with the desired attributes of the
post-redefinition table, and then call this procedure to initiate the redefinition.
NO.4 Your multitenant container (CDB) containing three pluggable databases (PDBs) is running in
ARCHIVELOG mode. You find that the SYSAUX tablespace is corrupted in the root container.
The steps to recover the tablespace are as follows:
1.Mount the CDB.
2.Close all the PDBs.
3.Open the database.
4.Apply the archive redo logs.
5.Restore the data file.
6.Take the SYSAUX tablespace offline.
7.Place the SYSAUX tablespace offline.
8.Open all the PDBs with RESETLOGS.
NO.5 Your multitenant container (CDB) contains two pluggable databases(PDB), HR_PDB and
ACCOUNTS_PDB, both of which use the CDB tablespace. The temp file is called temp01.tmp.
A user issues a query on a table on one of the PDBs and receives the following error:
ERROR at line 1:
ORA-01565: error in identifying file '/u01 /app/oracle/oradata/CDB1 /temp01.tmp'
ORA-27037: unable to obtain file status
Identify two ways to rectify the error.
A. Add a new temp file to the temporary tablespace and drop the temp file that that produced the
error.
B. Shut down the database instance, restore the temp01.tmp file from the backup, and then restart
the database.
C. Take the temporary tablespace offline, recover the missing temp file by applying redo logs, and
then bring the temporary tablespace online.
D. Shutdown the database instance, restore and recover the temp file from the backup, and then
open the database with RESETLOGS.
E. Shut down the database instance and then restart the CDB and PDBs.
Answer: C,E
Oracle 1Z0-060認定試験 1Z0-060
Explanation:
* Because temp files cannot be backed up and because no redo is ever generated for them, RMAN
never restores or recovers temp files. RMAN does track the names of temp files, but only so that it
can automatically re-create them when needed.
*If you use RMAN in a Data Guard environment, then RMAN transparently converts primary control
files to standby control files and vice versa. RMAN automatically updates file names for data files,
online redo logs, standby redo logs, and temp files when you issue RESTORE and RECOVER.
NO.6 Open the database with RESETLOGS.
NO.7 You are administering a database stored in Automatic Storage Management (ASM). You
use RMAN to back up the database and the MD_BACKUP command to back up the ASM metadata
regularly. You lost an ASM disk group DG1 due to hardware failure.
In which three ways can you re-create the lost disk group and restore the data?
A. Use the MD_RESTORE command to restore metadata for an existing disk group by passing the
existing disk group name as an input parameter and use RMAN to restore the data.
B. Use the MKDG command to restore the disk group with the same configuration as the backed-up
disk group and data on the disk group.
C. Use the MD_RESTORE command to restore the disk group with the changed disk group
specification, failure group specification, name, and other attributes and use RMAN to restore the
data.
D. Use the MKDG command to restore the disk group with the same configuration as the backed-up
disk group name and same set of disks and failure group configuration, and use RMAN to restore
the data.
E. Use the MD_RESTORE command to restore both the metadata and data for the failed disk group.
F. Use the MKDG command to add a new disk group DG1 with the same or different specifications
for failure group and other attributes and use RMAN to restore the data.
Answer: C,E,F
Oracle 1Z0-060過去問 1Z0-060
Explanation:
Note:
*The md_restore command allows you to restore a disk group from the metadata created
by the md_backup command.
/md_restore Command
Purpose
This command restores a disk group backup using various options that are described in
this section.
/In the restore mode md_restore, it re-create the disk group based on the backup file with
all user-defined templates with the exact configuration as the backuped disk group. There
are several options when restore the disk group
full - re-create the disk group with the exact configuration
nodg - Restores metadata in an existing disk group provided as an input parameter
newdg - Change the configuration like failure group, disk group name, etc..
*The MD_BACKUP command creates a backup file containing metadata for one or more
disk groups. By default all the mounted disk groups are included in the backup file which is
saved in the current working directory. If the name of the backup file is not specified, ASM names
the file AMBR_BACKUP_INTERMEDIATE_FILE.
NO.8 Your multitenant container database, CDB1, is running in ARCHIVELOG mode and has two
pluggable databases, HR_PDB and ACCOUNTS_PDB. An RMAN backup exists for the database.
You issue the command to open ACCOUNTS_PDB and find that the USERDATA.DBF data file for the
default permanent tablespace USERDATA belonging to ACCOUNTS_PDB is corrupted.
What should you do before executing the commands to restore and recover the data file in
ACCOUNTS_PDB?
A. Place CDB1 in the mount stage and then the USERDATA tablespace offline in ACCOUNTS_PDB.
B. Place CDB1 in the mount stage and issue the ALTER PLUGGABLE DATABASE accounts_pdb CLOSE
IMMEDIATE command.
C. Issue the ALTER PLUGGABLE DATABASE accounts_pdb RESTRICTED command.
D. Take the USERDATA tablespace offlineinACCOUNTS_PDB.
Answer: D
Oracle認定資格 1Z0-060 1Z0-060認証試験 1Z0-060
Explanation:
*You can take an online tablespace offline so that it is temporarily unavailable for general use. The
rest of the database remains open and available for users to access data. Conversely, you can bring
an offline tablespace online to make the schema objects within the tablespace available to database
users. The database must be open to alter the availability of a tablespace.
NO.9 Which three are true about the large poolfor anOracle database instance that supports
shared server connections?
A. Allocates memory for RMAN backup and restore operations
B. Allocates memory for shared and private SQL areas
C. Contains a cursor area for storing runtime information about cursors
D. Contains stack space
E. Contains a hash area performing hash joins of tables
Answer: A,B,C
Oracle認定資格 1Z0-060問題集 1Z0-060参考書 1Z0-060 1Z0-060練習問題 1Z0-060
Explanation:
The large pool can provide large memory allocations for the following:
/(B)UGA(User Global Area)for the shared server and the Oracle XA interface (used where
transactions interact with multiple databases)
/Message buffers used in the parallel execution of statements
/(A)Buffers for Recovery Manager (RMAN) I/O slaves
Note:
*large pool
Optional area in the SGA that provides large memory allocations for backup and restore
operations, I/O server processes, and session memory for the shared server and Oracle
XA.
*Oracle XA
An external interface that allows global transactions to be coordinated by a transaction
manager other than Oracle Database.
*UGA
User global area. Session memory that stores session variables, such as logon
information, and can also contain the OLAP pool.
*Configuring the Large Pool
Unlike the shared pool, the large pool does not have an LRU list(not D). Oracle Database
does not attempt to age objects out of the large pool. Consider configuring a large pool if
the database instance uses any of the following Oracle Database features:
*Shared server
In a shared server architecture, the session memory for each client process is included in
the shared pool.
*Parallel query
Parallel query uses shared pool memory to cache parallel execution message buffers.
*Recovery Manager
Recovery Manager (RMAN) uses the shared pool to cache I/O buffers during backup and restore
operations. For I/O server processes, backup, and restore operations, Oracle Database allocates
buffers that are a few hundred kilobytes in size.
NO.10 You notice that the performance of your production 24 /7 Oracle database significantly
degraded. Sometimes you are not able to connect to the instance because it hangs. You do not want
to restart the database instance.
How can you detect the cause of the degraded performance?
A. Enable Memory Access Mode, which reads performance data from SGA.
B. Use emergency monitoring to fetch data directly from SGA analysis.
C. Run Automatic Database Diagnostic Monitor (ADDM) to fetch information from the latest
Automatic Workload Repository (AWR) snapshots.
D. Use Active Session History (ASH) data and hang analysis in regular performance monitoring.
E. Run ADDM in diagnostic mode.
Answer: C
Oracle 1Z0-060認定資格 1Z0-060問題集 1Z0-060参考書
Explanation:
*In most cases, ADDM output should be the first place that a DBA looks when notified of a
performance problem. *Performance degradation of the database occurs when your database was
performing optimally in the past, such as 6 months ago, but has gradually degraded to a point
where it becomes noticeable to the users. The Automatic Workload Repository (AWR) Compare
Periods report enables you to compare database performance between two periods of time.
While an AWR report shows AWR data between two snapshots (or two points in time), the AWR
Compare Periods report shows the difference between two periods (or two AWR reports with a
total of four snapshots). Using the AWR Compare Periods report helps you to identify detailed
performance attributes and configuration settings that differ between two time periods.
Reference:Resolving Performance Degradation Over Time
NO.11 Which statement is true about Oracle Net Listener?
A. It acts as the listening endpoint for the Oracle database instance for all local and non-local user
connections.
B. A single listener can service only one database instance and multiple remote client connections.
C. Service registration with the listener is performed by the process monitor (PMON) process of
each database instance.
D. The listener.ora configuration file must be configured with one or more listening protocol
addresses to allow remote users to connect to a database instance.
E. The listener.ora configuration file must be located in the ORACLE_HOME/network/admin directly.
Answer: C
Oracle 1Z0-060練習問題 1Z0-060認定試験 1Z0-060
Explanation:
Supported services, that is, the services to which the listener forwards client
requests, can be configured in the listener.ora file or this information can be dynamically
registered with the listener. This dynamic registration feature is called service registration.
The registration is performed by the PMON process-an instance background process-of
each database instance that has the necessary configuration in the database initialization
parameter file. Dynamic service registration does not require any configuration in the
listener.ora file.
Incorrect:
Not B:Service registration reduces the need for the SID_LIST_listener_name parameter
setting, which specifies information about the databases served by the listener, in the
listener.ora file.
Note:
*Oracle Net Listener is a separate process that runs on the database server computer. It
receives incoming client connection requests and manages the traffic of these requests to
the database server.
*A remote listener is a listener residing on one computer that redirects connections to a
database instance on another computer. Remote listeners are typically used in an Oracle
Real Application Clusters (Oracle RAC) environment. You can configure registration to
remote listeners, such as in the case of Oracle RAC, for dedicated server or shared server
environments.
NO.12 You plan to use the In Database Archiving feature of Oracle Database 12c, and store rows that
are inactive for over three months, in Hybrid Columnar Compressed (HCC) format.
Which three storage options support the use of HCC?
A. ASM disk groups with ASM disks consisting of Exadata Grid Disks.
B. ASM disk groups with ASM disks consisting of LUNS on any Storage Area Network array
C. ASM disk groups with ASM disks consisting of any zero padded NFS-mounted files
D. Database files stored in ZFS and accessed using conventional NFS mounts.
E. Database files stored in ZFS and accessed using the Oracle Direct NFS feature
F. Database files stored in any file system and accessed using the Oracle Direct NFS feature
G. ASM disk groups with ASM disks consisting of LUNs on Pillar Axiom Storage arrays
Answer: A,E,G
Oracle認証試験 1Z0-060 1Z0-060 1Z0-060 1Z0-060
Explanation:
HCC requires the use of Oracle Storage - Exadata(A), Pillar Axiom(G)or Sun ZFS Storage Appliance
(ZFSSA).
Note: *Hybrid Columnar Compression, initially only available on Exadata, has been extended to
supportPillar Axiom and Sun ZFS Storage Appliance (ZFSSA) storage when used with Oracle
Database Enterprise Edition 11.2.0.3 and above *Oracle offers the ability to manage NFS using a
feature called Oracle Direct NFS (dNFS). Oracle Direct NFS implements NFS V3 protocol within the
Oracle database kernel itself. Oracle Direct NFS client overcomes many of the challenges associated
with using NFS with the Oracle Database with simple configuration, betterperformance than
traditional NFS clients, and offers consistent configuration across platforms.
NO.13 Execute the command SHUTDOWN ABORT.
Which option identifies the correct sequence to recover the SYSAUX tablespace?
A. 6, 5, 4, 7
B. 10, 1, 2, 5, 8
C. 10, 1, 2, 5, 4, 9, 8
D. 10, 1, 5, 8, 10
Answer: C
Oracle 1Z0-060 1Z0-060問題集 1Z0-060
Explanation:
* Example:
While evaluating the 12c beta3 I was not able to do the recover while testing "all pdb files
lost".
Cannot close the pdb as the system datafile was missing...
So only option to recover was:
Shutdown cdb(10)
startup mount;(1)
restore pluggable database
recover pluggable databsae
alter database open;
alter pluggable database name open;
Oracle support says: You should be able to close the pdb and restore/recover the system
tablespace of PDB.
*Open the database with the RESETLOGS option after finishing recovery: SQL> ALTER DATABASE
OPEN RESETLOGS;
9. Which three are direct benefits of the multiprocess, multithreaded architecture of Oracle
Database 12c when it is enabled?
A. Reduced logical I/O
B. Reduced virtual memory utilization
C. Improved parallel Execution performance
D. Improved Serial Execution performance
E. Reduced physical I/O
F. Reduced CPU utilization
Answer: C
Oracle 1Z0-060認証試験 1Z0-060過去問 1Z0-060過去問 1Z0-060
Explanation:
*Multiprocess and Multithreaded Oracle Database Systems
Multiprocess Oracle Database (also called multiuser Oracle Database) uses several processes to run
different parts of the Oracle Database code and additional Oracle processes for the users-either one
process for each connected user or one or more processes shared by multiple users. Most databases
are multiuser because a primary advantage of a database is managing data needed by multiple
users simultaneously.
Each process in a database instance performs a specific job. By dividing the work of the database
and applications into several processes, multiple users and applications can connect to an instance
simultaneously while the system gives good performance.
*In previous releases, Oracle processes did not run as threads on UNIX and Linux systems. Starting
in Oracle Database 12c, the multithreaded Oracle Database model enables Oracle processes to
execute as operating system threads in separate address spaces.
10. In order to exploit some new storage tiers that have been provisioned by a storage
administrator, the partitions of a large heap table must be moved to other tablespaces in your
Oracle 12c database?
Both local and global partitioned B-tree Indexes are defined on the table.
A high volume of transactions access the table during the day and a medium volume of transactions
access it at night and during weekends.
Minimal disrupt ion to availability is required.
Which three statements are true about this requirement?
A. The partitions can be moved online to new tablespaces.
B. Global indexes must be rebuilt manually after moving the partitions.
C. The partitions can be compressed in the same tablespaces.
D. The partitions can be compressed in the new tablespaces.
E. Local indexes must be rebuilt manually after moving the partitions.
Answer: A,B,D
Oracle 1Z0-060認定資格 1Z0-060認定証
Explanation:
A:You can create and rebuild indexes online. Therefore, you can update base tables at the same
time you are building or rebuilding indexes on that table. You can perform DML operations while
the index build is taking place, but DDL operations are not allowed. Parallel execution is not
supported when creating or rebuilding an index online.
B: Note: *Transporting and Attaching Partitions for Data Warehousing Typical enterprise data
warehouses contain one or more large fact tables. These fact tables can be partitioned by date,
making the enterprise data warehouse a historical database. You can build indexes to speed up star
queries. Oracle recommends that you build local indexes for such historically partitioned tables to
avoid rebuilding global indexes every time you drop the oldest partition from the historical database.
D:Moving (Rebuilding) Index-Organized Tables Because index-organized tables are primarily stored
in a B-tree index, you can encounter fragmentation as a consequence of incremental updates.
However, you can use the ALTER TABLE...MOVE statement to rebuild the index and reduce this
fragmentation.
NO.14 What are three purposes of the RMAN "FROM" clause?
A. to support PUSH-based active database duplication
B. to support synchronization of a standby database with the primary database in a Data
environment
C. To support PULL-based active database duplication
D. To support file restores over the network in a Data Guard environment
E. To support file recovery over the network in a Data Guard environment
Answer: B,C,E
Oracle 1Z0-060 1Z0-060認証試験 1Z0-060問題集
Explanation:
E:
*With a control file autobackup, RMAN can recover the database even if the current
control file, recovery catalog, and server parameter file are inaccessible.
*RMAN uses a recovery catalog to track filenames for all database files in a Data Guard
environment. A recovery catalog is a database schema used by RMAN to store metadata
about one or more Oracle databases. The catalog also records where the online redo logs,
standby redo logs, tempfiles, archived redo logs, backup sets, and image copies are
created.
NO.15 In your multitenant container database (CDB) containing pluggable databases (PDB), users
complain about performance degradation.
How does real-time Automatic database Diagnostic Monitor (ADDM) check performance
degradation and provide solutions?
A. It collects data from SGA and compares it with a preserved snapshot.
B. It collects data from SGA, analyzes it, and provides a report.
C. It collects data from SGA and compares it with the latest snapshot.
D. It collects data from both SGA and PGA, analyzes it, and provides a report.
Answer: B
Oracle 1Z0-060 1Z0-060認定資格 1Z0-060 1Z0-060
Explanation:
Note: *The multitenant architecture enables an Oracle database to function as a multitenant
container database (CDB) that includes zero, one, or many customer-created pluggable databases
(PDBs). A PDB is a portable collection of schemas, schema objects, and nonschema objects that
appears to an Oracle Net client as a non-CDB. All Oracle databases before Oracle Database 12c were
non-CDBs. *The System Global Area (SGA) is a group of shared memory areas that are dedicated to
an Oracle "instance" (an instance is your database programs and RAM).
*The PGA (Program or Process Global Area) is a memory area (RAM) that stores data and control
information for a single process.
Pass4Testは最新の70-342試験問題集と高品質の000-156認定試験の問題と回答を提供します。Pass4Testの000-N38 VCEテストエンジンとC4040-224試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-657トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论