2014年1月20日星期一

難しいHP HP0-Y30認定試験に対応する対策

あなたはIT職員ですか。今年で一番人気があるIT認証試験に申し込みましたか。もし「はい」と答えてくれたら、あなたはラッキですよ。Pass4TestのHPのHP0-Y30トレーニング資料はあなたが100パーセント試験に合格することを保証しますから。これは絶対に真実なことです。IT業種でより高いレベルに行きたいのなら、Pass4Testを選ぶのは間違いなく選択です。当社のトレーニング資料はあなたが全てのIT認証試験に合格することを助けます。しかも値段が手頃です。信じないことはしないでください。Pass4Testを利用したら分かります。

最近、HPの認定試験はますます人気があるようになっています。それと同時に、HPの認証資格ももっと重要になっています。IT業界では広く認可されている試験として、HP0-Y30認定試験はHPの中の最も重要な試験の一つです。この試験の認証資格を取ったら、あなたは多くの利益を得ることができます。あなたもこの試験を受ける予定があれば、Pass4TestのHP0-Y30問題集は試験に準備するときに欠くことができないツールです。この問題集はHP0-Y30認定試験に関連する最も優秀な参考書ですから。

HPのHP0-Y30認定試験はIT業界の中でとても普遍的な試験になります。試験の準備は時間とエネルギーがかかります。時は金なり社会に時間を無駄しないようによいツルを探し出されるのはみんなの希望です。Pass4TestのHPのHP0-Y30認証試験の問題集は君の20時間だけかかりますよ。

Pass4Testを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。Pass4TestはHP HP0-Y30認証試験を助けって通じての最良の選択で、100%のHP HP0-Y30認証試験合格率のはPass4Test最高の保証でございます。君が選んだのはPass4Test、成功を選択したのに等しいです。

試験番号:HP0-Y30問題集
試験科目:HP 「Implementing HP Networking Technologies」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2014-01-20
問題と解答:全137問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/HP0-Y30.html

NO.1 Which A-Series switch is designed for the large data center and the enterprise core?
A. A5820
B. A7500
C. A9500
D. A12500
Answer: D

HP問題集   HP0-Y30認定試験   HP0-Y30   HP0-Y30認定試験

NO.2 What is the effect of the following command entered at the CLI of an HP E3500 yl switch?
E3500(vlan-44)#interface 23
A. The CLI displays the status of port 23.
B. Port 23 becomes a member of VLAN 44.
C. Port 23 is enabled.
D. The CLI enters the configuration context for port 23.
Answer: D

HP認定試験   HP0-Y30問題集   HP0-Y30

NO.3 You must configure a port on an A5800 switch to support protocol-based VLANs and port-based
VLANs. Which port type supports this requirement?
A. hybrid
B. access
C. aggregated
D. trunk
E. tagged
Answer: A

HP認証試験   HP0-Y30参考書   HP0-Y30

NO.4 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch?
Switch(vlan-100)# end
"Pass Any Exam. Any Time." - www.actualtests.com 3
A. The CLI displays the Operator prompt.
B. The CLI displays the Manager prompt.
C. VLAN 100 is deleted from the switch.
D. The CLI displays the global configuration prompt.
Answer: D

HP認証試験   HP0-Y30練習問題   HP0-Y30   HP0-Y30認定証

NO.5 Which HP E-Series switch models are fixed-port switches? (Select two.)
A. E8212 zl
B. E4204 vl
C. E6600-24G
D. E5406 zl
E. E3500-48G yl
Answer: CE

HP認定証   HP0-Y30認定資格   HP0-Y30認証試験

NO.6 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch at
factory default settings.?
Switch# exit
A. The user is logged out of the console.
B. The privilege level moves from manager to operator.
C. Unsaved configuration changes are deleted.
D. The user exits from configuration mode.
Answer: B

HP   HP0-Y30過去問   HP0-Y30参考書   HP0-Y30

NO.7 You have uploaded an application file named "A12500.bin" to an HP A12500 switch.
Which command ensures this file is used during the next boot cycle?
A. boot-file cf:/A12500.bin main
B. load appfile cf:/A12500.bin main
C. boot-loader file cf:/A12500.bin main
D. set boot file cf:/A12500.bin main
Answer: C

HP認定試験   HP0-Y30   HP0-Y30   HP0-Y30認定試験

NO.8 Which view is indicated by the following prompt on an HP A7500 switch? <A7500>
A. system
B. operator
C. user
D. console
Answer: C

HP   HP0-Y30   HP0-Y30   HP0-Y30

NO.9 Click the Exhibit button.
Which statement accurately describes the state of Gigabit Ethernet 3/0/12 in the HP A-Series switch
configuration shown in the exhibit?
A. The interface will be a tagged member of VLAN 12.
B. The interface will be an untagged member of VLAN 1.
C. The interface will be an untagged member of VLAN 12.
D. The interface will drop all incoming packets for VLAN 12.
Answer: C

HP   HP0-Y30   HP0-Y30過去問   HP0-Y30認定資格

NO.10 At the CLI of an HP E5406 zl switch, you have assigned ports A1-A4 to VLAN 70 as untagged
members. All other configuration parameters on the E5406 zl are at default settings. The E5406 zl is
connected through port B1 to an HP E8212 zl switch. The E8212 zl has been configured with an IP
interface associated with VLAN 70, and IP routing has been enabled. On the E5406 zl, what must you do
to enable the E8212 zl to act as default gateway for VLAN 70 clients?
A. Define an IP interface in VLAN 70.
B. Configure port B1 to be a member of VLAN 70.
C. Define the VLAN 70 IP address of the E8212 zl as the default gateway.
D. Add a static route to the E8212 to the E5406 zl route table.
Answer: B

HP   HP0-Y30認証試験   HP0-Y30

NO.11 You must configure VLANs and ports on an HP A7500 switch at default settings. What is the effect of
the following commands?
[SW-Gigabit-Ethernet1/0/1]port link-type trunk [SW-Gigabit-Ethernet1/0/1]port trunk permit vlan 100 101
A. The switch will forward traffic for VLANs 100 and 101 with 802.1Q tags. Traffic for VLAN 1 will be
untagged. Traffic for all other VLANs will be discarded.
B. The switch will add port 1/0/1 to a Link Aggregation Group (LAG) that is a tagged member of VLANs
100 and 101.
C. The switch will forward traffic for VLANs 100 and 101, but will discard traffic for all other VLANs.
D. The switch will forward VLAN 101 traffic with 802.1Q tags. VLAN 100 traffic will be untagged.
Answer: A

HP認定証   HP0-Y30認証試験   HP0-Y30   HP0-Y30認定証   HP0-Y30

NO.12 You must reset the startup configuration of an HP A-Series switch to factory defaults. Which CLI view
will enable you to complete this task?
A. manager view
B. global configuration view
C. system view
D. user view
Answer: D

HP   HP0-Y30過去問   HP0-Y30   HP0-Y30

NO.13 You must configure SSH on an HP A7500 switch. Which item must be generated on the switch?
A. passphrase
B. shared secret
C. self-signed certificate
D. encryption keys
Answer: D

HP練習問題   HP0-Y30練習問題   HP0-Y30認証試験   HP0-Y30認定証

NO.14 What is a fit Access Point?
A. an AP that can provide WLAN services without a controller
B. an AP that has no intelligence and requires a wireless controller
C. an AP that can be deployed autonomously or with a controller
D. an AP that provides some intelligence under the management of a controller
Answer: D

HP   HP0-Y30練習問題   HP0-Y30   HP0-Y30

NO.15 You have initiated a console session on an HP A-Series switch at default settings. What is your
privilege level?
A. Visit (0)
B. Monitor (1)
C. System (2)
D. Manage (3)
Answer: D

HP認証試験   HP0-Y30   HP0-Y30参考書

NO.16 You must define a hostname on an HP E5400 zl Series switch. Which configuration context must you
enter to perform this task?
A. manager
B. system
C. administrator
D. global configuration
Answer: D

HP参考書   HP0-Y30   HP0-Y30   HP0-Y30

NO.17 Which interface is available for managing A-Series switches at factory default settings?
A. Telnet
B. menu
C. console
D. web
Answer: C

HP   HP0-Y30   HP0-Y30   HP0-Y30認定資格   HP0-Y30問題集

NO.18 Which type of port can handle more than one untagged VLAN on an HP A-Series switch?
A. trunk
B. access
C. aggregated
D. hybrid
Answer: D

HP参考書   HP0-Y30   HP0-Y30練習問題

NO.19 Which HP E-Series switch features redundant management and fabric modules?
A. E2910 al
B. E8212 zl
C. E5412 zl
D. E4208 vl
Answer: B

HP   HP0-Y30練習問題   HP0-Y30   HP0-Y30認定証   HP0-Y30   HP0-Y30認証試験

NO.20 You have entered the following command at the CLI of an HP E5400 zl Series switch. Switch(vlan-1)# ip
address 192.168.1.225/24
The switch's other VLAN and IP parameters are at factory defaults. While testing this configuration, you
find that the switch cannot ping a server located at 192.168.2.22. You have confirmed the server is up and
available. This server is located in a data center not directly connected to your switch.
What must you configure on the switch to enable connectivity between these two devices?
A. Add a default gateway.
B. Modify the IP address to 192.168.1.225/26.
C. Enable IP routing.
D. Add the server to allowed hosts list.
Answer: A

HP   HP0-Y30認定試験   HP0-Y30過去問   HP0-Y30   HP0-Y30

Pass4Testは最新のC4040-122試験問題集と高品質のC4040-123認定試験の問題と回答を提供します。Pass4TestのHP2-W100 VCEテストエンジンと000-273試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の642-384トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.pass4test.jp/HP0-Y30.html

没有评论:

发表评论