あなたはこのような人々の一人ですか。さまざまな資料とトレーニング授業を前にして、どれを選ぶか本当に困っているのです。もしそうだったら、これ以上困ることはないです。Pass4Testはあなたにとって最も正確な選択ですから。我々はあなたに試験問題と解答に含まれている全面的な試験資料を提供することができます。Pass4Testの解答は最も正確な解釈ですから、あなたがより良い知識を身につけることに助けになれます。Pass4Testを利用したら、HPのHP2-Z12認定試験に受かることを信じています。それも我々が全てのお客様に対する約束です。
あなたはPass4Testが提供したHPのHP2-Z12認定試験の問題集だけ利用して合格することが問題になりません。ほかの人を超えて業界の中で最大の昇進の機会を得ます。もしあなたはPass4Testの商品がショッピング車に入れて24のインターネットオンライン顧客サービスを提供いたします。問題があったら気軽にお問いください、
君はまずネットで無料なHPのHP2-Z12試験問題をダウンロードしてから 弊社の品質を確信してから、購入してください。Pass4Testは提供した商品は君の成功を全力で助けさしたげます。
試験番号：HP2-Z12問題集
試験科目：HP 「Servicing HP Networking Products」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-01-20
問題と解答：全94問
今の競争の激しいIT業界ではHPのHP2-Z12試験にパスした方はメリットがおおくなります。給料もほかの人と比べて高くて仕事の内容も豊富です。でも、この試験はそれほど簡単ではありません。
HPのHP2-Z12認定試験に受かる勉強サイトを探しているのなら、Pass4Testはあなたにとって一番良い選択です。Pass4Testがあなたに差し上げられるのはIT業種の最先端のスキルを習得したこととHPのHP2-Z12認定試験に合格したことです。この試験は本当に難しいことがみんなは良く知っていますが、試験に受かるのは不可能ではないです。自分に向いている勉強ツールを選べますから。Pass4Test のHPのHP2-Z12試験問題集と解答はあなたにとって一番良い選択です。Pass4Testのトレーニング資料は完全だけでなく、カバー率も高くて、高度なシミュレーションを持っているのです。これはさまざまな試験の実践の検査に合格したもので、HPのHP2-Z12認定試験に合格したかったら、Pass4Testを選ぶのは絶対正しいことです。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/HP2-Z12.html
NO.1 You are installing an HP A Series switch that requires a backup power supply as well as extra power for
Power over Ethernet (PoE) devices. Which device should you connect to this switch?
A. RPS 1200 A
B. RPS 1000 A3
C. RPS 800 A
D. RPS500 A3
Answer: B
HP HP2-Z12 HP2-Z12過去問 HP2-Z12
NO.2 Which switch is specifically designed for networks that require basic connectivity and have little or no IT
support?
A. fixed-port switch
B. light Layer 3 switch
C. modular switch
D. unmanaged switch
Answer: D
HP HP2-Z12 HP2-Z12認定試験 HP2-Z12
NO.3 Which HP E Switch Series is specifically designed to be deployed in a data center?
A. E4200vl
B. E6200yl
C. E6600
D. E8200zl
Answer: C
HP HP2-Z12 HP2-Z12 HP2-Z12 HP2-Z12過去問
NO.4 You are troubleshooting a connection on an HP A Series switch that has one LED per-port. You want to
know if the port is operating in the wrong duplex mode. How do you use the LED to obtain relevant
information?
A. Click the Mode button until the mode LED is blinkinggreenand thencheck the port LED.
B. Click the Mode button until the mode LED is yellow and thencheck the port LED.
C. Check if the port LED is blinking,which indicates its duplex status (while its color indicates speed).
D. Check the color of the port LED, which indicates its duplex status (while its blinking indicates speed).
Answer: B
HP HP2-Z12 HP2-Z12練習問題 HP2-Z12参考書
NO.5 Which device forwards network traffic based only on Layer 2 information?
A. router
B. switch
C. hub
D. firewall
Answer: C
HP HP2-Z12 HP2-Z12 HP2-Z12 HP2-Z12
NO.6 Which area of the network is considered the backbone?
A. data center
B. core
C. distribution layer
D. LAN access layer
Answer: B
HP過去問 HP2-Z12 HP2-Z12 HP2-Z12 HP2-Z12 HP2-Z12認定資格
NO.7 You are installing an SFP transceiver in an HP A Series switch's SFP port. Which steps should you
perform? (Select two.)
A. Connect the fiber optic cable to the SFP transceiver before installing the transceiver.
B. Slide the transceiver into the SFP port until the spring clips catch.
C. Rotate the clasp, if present on the front of the transceiver, until it catches the knob.
D. Press and hold the spring clips on the SFP port
E. Press and hold the release button below the SFP port.
Answer: B,C
HP問題集 HP2-Z12 HP2-Z12参考書 HP2-Z12 HP2-Z12認定試験
NO.8 You have been sent to a customer site to check an HP E8212 zlswitch. When you arrive, you notice
that the Fault and Fan Status LEDs are flashing. What is the most likely cause of this LED behavior?
A. The cooling fan is no longer functional
B. The switch is brand new and needs to have the most current firmware installed.
C. The external power supply has failed, causing the fan to malfunction.
D. The switch has failed its self-test
Answer: C
HP HP2-Z12 HP2-Z12認定試験
NO.9 Which HP A Series switches provide Layer 2 functionality and a Web browser interface but no CLI?
A. HP A5800 Series switches
B. HP NJ2000GIntelliJack switches
C. HP A3600-E1 Series switches
D. HP A3100 Series switches
Answer: B
HP HP2-Z12 HP2-Z12 HP2-Z12
NO.10 How can you check the status of the ports that are providing Power over Ethernet (PoE) on an HP
E2610-PWR switch?
A. Use the Mode button to selectPoE and then view the port Link and Mode LEDs
B. Use the Port Locator button to selectPoE and then view the port Status and Link LEDs.
C. View the portPoE LED.
D. Use the switch'sPoE LED and the PoE LED for each port.
Answer: A
HP HP2-Z12 HP2-Z12練習問題 HP2-Z12
NO.11 DRAG DROP
Match the HP A Series switch user interface with the type of access that it controls.
Answer:
NO.12 Which E Series switches require two power supplies to be completely operational? (Select two.)
A. HP E4200vl switch
B. HP E5406zl switch
C. HP E5412zl switch
D. HP E2900 al switch
E. HP E8212zl switch
Answer: C,E
HP HP2-Z12練習問題 HP2-Z12 HP2-Z12
NO.13 You check the startup-config on an HP A Series switch and find that the switch uses myconfig.cfg as
the main startup-config and has no backup config. What happens if you use the undo startup
savedconfiguration command?
A. The myconfig.cfg file is deleted, and the switch returns to factory default settings at the next reboot.
B. The myconfig.cfg file becomes the backup startup-config, and the switch returns to factory default
settings at the next reboot.
C. The myconfig.cfg file becomes the backup startup-config, and is booted at the next reboot unless you
set another main startup-config
D. The myconfig.cfg file is retained in the switch's memory, but the switch returns to factory default
settings at the next reboot
Answer: D
HP HP2-Z12 HP2-Z12 HP2-Z12 HP2-Z12 HP2-Z12
NO.14 Several HP A Series switches are distinguished by a dual-personality (or combo) port. What is an
accurate description of this port?
A. It can accept either Ethernet Base-T cable or fiber optic cable
B. It can accept either Ethernet Base-T cable or a small form-factor pluggable (SFP) transceiver
C. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Both can be used simultaneously.
D. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Only one can be used at a time.
Answer: B
HP HP2-Z12 HP2-Z12過去問
NO.15 You log in to an HP A Series switch over a console session in order to establish IP connectivity
between the switch and the rest of the network. What is the minimum user privilege level needed to
complete this task?
A. Operator
B. Monitor
C. System
D. Manage
Answer: C
HP問題集 HP2-Z12 HP2-Z12 HP2-Z12認定証 HP2-Z12 HP2-Z12練習問題
NO.16 You are installing a redundant power supply in an HP E8212 zl switch. Which procedures are
recommended when installing the new power supply?(Select two.)
A. Remove the copper RFI shielding.
B. Attach the new power supply to a different AC power source than the existing power supply to provide
true redundancy.
C. Tighten the retaining screws on the new power supply until they are snug but not over-tight.
D. Connect the redundant power supply to the AC power source before installing it in the switch.
E. Remove the grounding tap from the console port before installing the power supply.
Answer: B,C
HP HP2-Z12問題集 HP2-Z12問題集
NO.17 You are troubleshooting an HP A Series switch. You attempt to log in to both the CLI and the Web
browser interface in several different ways, but you are always prompted for credentials. The customer
tells you that the person who created the passwords is no longer employed by the company. What can
you do to access the switch?
A. Use the failsafe credentials, admin for username and password for password.
B. Press the Reset and Clear buttons on the switch's front panel, holding them for at least 5 seconds, to
clear the password
C. Access the Boot ROM menu and bypass the configuration, starting the switch at factory default
settings.
D. Access the switch over a direct console connection, which always permits access without a password.
Answer: C
HP認証試験 HP2-Z12参考書 HP2-Z12 HP2-Z12認定試験
NO.18 You are servicing an HP A Series switch, which is currently using a file call myconfig.cfg for the
startup-config. You want to preserve your new configuration changes in the switch's startup config.
Which command should you use?
A. write memory
B. save
C. save startup.cfg
D. copy running-config startup-config
Answer: D
HP過去問 HP2-Z12問題集 HP2-Z12 HP2-Z12 HP2-Z12認定証
NO.19 A faulty configuration on an HP A Series switch locked a customer out of the management interface.
You bypass the configuration and gain access to the switch's CLI.Your manager asks
you to send her the configuration to examine.
What must you do?
A. Establish IP connectivity between the switch and a BackUp the Startup-Config to a TFTP Server server
and issue the backup command
B. Use the copy command to copy the configuration to your management station.
C. Establish IP connectivity between the switch and your management station and use the save
command to save the configuration.
D. Use the saved-configuration command to select the startup-config and save it out to your management
station.
Answer: A
HP過去問 HP2-Z12 HP2-Z12 HP2-Z12認定資格 HP2-Z12 HP2-Z12
NO.20 The exhibit shows the Power and seven-segment LEDs of an HP A Series switch. What is the switch's
status?
Exhibit:
A. The switch has member ID 8 in the cluster.
B. The switch has member ID 8 in the cluster, but its attempt to join the cluster has failed.
C. The switch has failed the power on self test (POST) with ID 8.
D. Port number 8 has failed the switch's power on self test (POST).
Answer: C
HP HP2-Z12 HP2-Z12参考書
Pass4Testは最新の1Y0-250試験問題集と高品質のMB6-886認定試験の問題と回答を提供します。Pass4TestのLOT-407 VCEテストエンジンと1z0-481試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-N52トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论