あなたは弊社の商品を買ったら一年間に無料でアップサービスが提供された認定試験に合格するまで利用しても喜んでいます。もしテストの内容が変われば、すぐにお客様に伝えます。弊社はあなた１００％合格率を保証いたします。
Pass4Testを選択したら、成功が遠くではありません。Pass4Testが提供するHPのHP0-M18認証試験問題集が君の試験に合格させます。テストの時に有効なツルが必要でございます。
あまりにも多くのIT認定試験と試験に関連する参考書を見ると、頭が痛いと感じていますか。一体どうしたらでしょうか。どのように選択すべきなのかを知らないなら、私は教えてあげます。最近非常に人気があるHPのHP0-M18認定試験を選択できます。この認定試験の資格を取得すれば、あなたは大きなメリットを得ることができます。それに、より効率的に試験の準備をするために、Pass4TestのHP0-M18試験問題集を選択したほうがいいです。それはあなたが試験に合格する最善の方法です。
Pass4TestはHPのHP0-M18認定試験について開発された問題集がとても歓迎されるのはここで知識を得るだけでなく多くの先輩の経験も得ます。試験に良いの準備と自信がとても必要だと思います。使用して私たちPass4Testが提供した対応性練習問題が君にとってはなかなかよいサイトだと思います。
試験番号：HP0-M18問題集
試験科目：HP 「HP LoadRunner Software」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-02-07
問題と解答：全120問
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/HP0-M18.html
NO.1 While analyzing the Vuser log files from a scenario run, you see the following log file from one of the
Vusers.
Start auto log message stack - Iteration 1.
Starting action BookFlight.
BookFlight.c(5): Notify: Transaction WT_00_Home_Page started.
BookFlight.c(7): Error -27796: Failed to connect to server 27.0.0.1:1080 [10061]
End auto log message stack.
What was the Run-time setting, Logging option set to?
A. Standard Logging
B. Extended Logging
C. Always send a message
D. Send a message only when an error occurs
Answer: D
HP問題集 HP0-M18 HP0-M18 HP0-M18 HP0-M18過去問 HP0-M18認定証
NO.2 Which scenario execution run allows you to verify the system performs as expected under load?
A. Debug
B. Full Load
C. Top Time
D. Scalability
Answer: B
HP認定資格 HP0-M18認定試験 HP0-M18認定資格 HP0-M18 HP0-M18認証試験 HP0-M18認定試験
NO.3 After the scenario execution, which LoadRunner component is responsible for collecting and
organizing the performance data?
A. VuGen
B. Analysis
C. Controller
D. load generator
Answer: C
HP HP0-M18練習問題 HP0-M18 HP0-M18 HP0-M18参考書
NO.4 Which Analysis graph details the delay for the complete path between the source and destination
machines?
A. MS IIS
B. Windows Resource
C. Network Delay Time
D. Time to First Buffer Breakdown
Answer: C
HP HP0-M18 HP0-M18参考書
NO.5 Which option in the Analysis tool allows you to see the results of two graphs from the same load test
scenario in a single graph?
A. Drill Down
B. Apply Filter
C. Merge Graphs
D. Auto Correlate
Answer: C
HP認証試験 HP0-M18 HP0-M18認定資格 HP0-M18認証試験 HP0-M18認証試験
NO.6 You configure a scenario to start with a delay of <05:00:00> (HH:MM:SS) just before leaving from
work. You return the next morning to find that the scenario did not run. Why would this happen?
A. You failed to save the scenario.
B. You failed to save the schedule.
C. You failed to connect to the load generators.
D. You failed to press the START SCENARIO button.
Answer: D
HP HP0-M18 HP0-M18 HP0-M18 HP0-M18参考書 HP0-M18
NO.7 Click the Exhibit button.
Which type of graph does the image in the exhibit represent?
A. Merged graph
B. Drill Down graph
C. Cross Scenario graph
D. Auto Correlated graph
Answer: C
HP HP0-M18問題集 HP0-M18 HP0-M18問題集 HP0-M18
NO.8 You are running a test and notice that during the ramp up, the response times are beginning to
drastically increase. How can you instruct LoadRunner to stop ramping up Vusers and hold the current
number?
A. press the STOP button on the Controller's main window
B. press the PAUSE button on the Interactive Schedule graph
C. select the option to wait for the current iteration to end before stopping
D. select the Vusers in the Ready state from the Vusers window and click the STOP button
Answer: B
HP問題集 HP0-M18 HP0-M18 HP0-M18
NO.9 During analysis of a scenario, you realize that the throughput becomes flat as Vusers continue to
increase. What is the likely cause?
A. a bandwidth problem
B. a database server problem
C. a web server connection problem
D. an application server connection problem
Answer:A
HP問題集 HP0-M18問題集 HP0-M18認定証 HP0-M18
NO.10 Where in the Run-time settings can you define to only send messages when an error occurs?
A. General: Log
B. General: Run Logic
C. General: Miscellaneous
D. General: Additional Attributes
Answer:A
HP練習問題 HP0-M18 HP0-M18練習問題 HP0-M18 HP0-M18練習問題
NO.11 Which option in the Analysis tool allows you to compare a measurement in a graph with other
measurements during a specific time range of a scenario and view similar trends?
A. Drill Down
B. Apply Filter
C. Merge Graphs
D. Auto Correlate
Answer: D
HP HP0-M18 HP0-M18問題集 HP0-M18 HP0-M18認定証 HP0-M18参考書
NO.12 Which Analysis graph shows the number of transactions against transaction response times?
A. Transactions per Second
B. Average Transaction Response Time
C. Transaction Response Time Under Load
D. Transaction Response Time (distribution)
Answer: D
HP HP0-M18 HP0-M18過去問
NO.13 Click the Exhibit button.
What does the image shown in the exhibit represent?
A. Thumbnail
B. Extended Log
C. Content Check
D. Snapshot on Error
Answer: D
HP練習問題 HP0-M18 HP0-M18 HP0-M18
NO.14 Where are the results stored during the run of a scenario?
A. Analysis
B. Controller
C. utility server
D. load generator
Answer: D
HP HP0-M18 HP0-M18 HP0-M18認定証
NO.15 When you define a rendezvous point in a scenario, where should the lr_start_transaction function be
placed?
A. at the end of the action section
B. at the beginning of the action section
C. immediately after the rendezvous function
D. immediately before the rendezvous function
Answer: C
HP HP0-M18 HP0-M18認定試験
NO.16 Which Analysis graph details transaction response times as a function of load?
A. Transactions per Second
B. Average Transaction Response Time
C. Transaction Response Time Under Load
D. Transaction Response Time (distribution)
Answer: C
HP HP0-M18問題集 HP0-M18練習問題 HP0-M18認定資格 HP0-M18
NO.17 When you specify to iterate a script 10 times, which sections of the script are iterated?
A. group
B. action
C. vuser_init
D. vuser_end
Answer: B
HP HP0-M18 HP0-M18
NO.18 What does the elapsed time in the Scenario Status window refer to?
A. the time that has elapsed from when all Vusers have finished Initializing
B. the time that has elapsed from when all Vusers were in the running state
C. the time that has elapsed from when you press the start Scenario button
D. the time that has elapsed from when the first Vusers entered the running state
Answer: C
HP HP0-M18 HP0-M18 HP0-M18 HP0-M18 HP0-M18問題集
NO.19 When scheduling by scenario, to which group(s) does the defined schedule apply?
A. all groups in the scenario
B. only the first group in the scenario
C. only the selected group in the scenario
D. only the selected group in the scenario scheduler
Answer:A
HP参考書 HP0-M18 HP0-M18 HP0-M18認定証
NO.20 In the Analysis tool, what allows you to modify the scale of the x-axis?
A. think time
B. granularity
C. event type
D. transaction hierarchical path
Answer: B
HP HP0-M18問題集 HP0-M18 HP0-M18
Pass4Testは最新のC_HANAIMP_1試験問題集と高品質の200-120認定試験の問題と回答を提供します。Pass4Testの74-324 VCEテストエンジンと850-001試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のACMA_6.1トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论