Pass4Testは高品質の製品を提供するだけではなく、完全なアフターサービスも提供します。当社の製品を利用したら、一年間の無料更新サービスを提供します。しかも、速いスピードで受験生の皆様に提供して差し上げます。あなたがいつでも最新の試験資料を持っていることを保証します。
Pass4Testの70-513問題集の超低い価格に反して、 Pass4Testに提供される問題集は最高の品質を持っています。そして、もっと重要なのは、Pass4Testは質の高いサービスを提供します。望ましい問題集を支払うと、あなたはすぐにそれを得ることができます。Pass4Testのサイトはあなたが最も必要なもの、しかもあなたに最適な試験参考書を持っています。70-513問題集を購入してから、また一年間の無料更新サービスを得ることもできます。一年以内に、あなたが持っている資料を更新したい限り、Pass4Testは最新バージョンの70-513問題集を捧げます。Pass4Testはあなたに最大の利便性を与えるために全力を尽くしています。
Microsoftの70-513認定試験に受かる勉強サイトを探しているのなら、Pass4Testはあなたにとって一番良い選択です。Pass4Testがあなたに差し上げられるのはIT業種の最先端のスキルを習得したこととMicrosoftの70-513認定試験に合格したことです。この試験は本当に難しいことがみんなは良く知っていますが、試験に受かるのは不可能ではないです。自分に向いている勉強ツールを選べますから。Pass4Test のMicrosoftの70-513試験問題集と解答はあなたにとって一番良い選択です。Pass4Testのトレーニング資料は完全だけでなく、カバー率も高くて、高度なシミュレーションを持っているのです。これはさまざまな試験の実践の検査に合格したもので、Microsoftの70-513認定試験に合格したかったら、Pass4Testを選ぶのは絶対正しいことです。
Pass4TestのMicrosoftの70-513試験トレーニング資料は受験生が模擬試験場で勉強させます。受験生は問題を選べ、テストの時間もコントロールできます。Pass4Testというサイトで、あなたはストレスと不安なく試験の準備をすることができますから、一般的な間違いを避けられます。そうしたら、あなたは自信を得ることができて、実際の試験で経験を活かして気楽に合格します。
Microsoftの70-513試験に受かるために一所懸命頑張って勉強していれば、あなたは間違っているのです。もちろん頑張って勉強するのは試験に合格することができますが、望ましい効果を達成できないかもしれません。現在はインターネットの時代で、試験に合格する ショートカットがたくさんあります。Pass4TestのMicrosoftの70-513試験トレーニング資料はとても良いトレーニング資料で、あなたが試験に合格することを保証します。この資料は値段が手頃だけでなく、あなたの時間を大量に節約できます。そうしたら、半分の労力で二倍の効果を得ることができます。
我々は全て平凡かつ普通な人で、時には勉強したものをこなしきれないですから、忘れがちになります。 Pass4TestのMicrosoftの70-513試験トレーニング資料を見つけたら、これはあなたが購入しなければならないものを知ります。Pass4Testはあなたが楽に試験に合格することを助けます。Pass4Testを信頼してください。どんなに難しい試験でも、Pass4Testがいるのなら、大丈夫になります。
「成功っていうのはどちらですか。」このように質問した人がいます。私は答えてあげますよ。Pass4Testを選んだら成功を選ぶということです。Pass4TestのMicrosoftの70-513試験トレーニング資料はIT認証試験を受ける全ての受験生が試験に合格することを助けるものです。この資料はMicrosoftの70-513試験のために特別に研究されたもので、受験生からの良い評価をたくさんもらいました。Pass4TestのMicrosoftの70-513試験トレーニング資料を選んだらぜひ成功するということを証明しました。
試験番号：70-513問題集
試験科目：Microsoft 「TS: Windows Communication Foundation velopment with Microsoft .NET Framework 4」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-02-23
問題と解答：全163問
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/70-513.html
NO.1 A Windows Communication Foundation (WCF) service uses the following service contract.
[ServiceContract]
public interface IService
{
[OperationContract]
string Operation1(string s);
}
You need to ensure that the operation contract Operation1 responds to HTTP POST requests.
Which code segment should you use?
A.[OperationContract]
[WebInvoke(Method="POST")]
string Operation1(string s);
B.[OperationContract]
[WebGet(UriTemplate="POST")]
string Operation1(string s);
C.[OperationContract(ReplyAction="POST")]
string Operation1(string s);
D.[OperationContract(Action="POST")]
string Operation1(string s);
Answer: A
Microsoft認定資格 70-513練習問題 70-513
NO.2 A Windows Communication Foundation (WCF) service implements a contract with one-way and
request-reply operations.
The service is exposed over a TCP transport. Clients use a router to communicate with the service.
The router is implemented as follows. (Line numbers are included for reference only.)
01 ServiceHost host = new ServiceHost(typeof(RoutingService));
02 host.AddServiceEndpoint(
03 typeof(ISimplexDatagramRouter),
04 new NetTcpBinding(), "net.tcp://localhost/Router"
05 );
06 List<ServiceEndpoint> lep = new List<ServiceEndpoint>();
07 lep.Add(
08 new ServiceEndpoint(
09 ContractDescription.GetContract(
10 typeof(ISimplexDatagramRouter)
11 ),
NO.3 You are developing a data contract for a Windows Communication Foundation (WCF) service.
The data in the data contract must participate in round trips. Strict schema validity is not required.
You need to ensure that the contract is forward-compatible and allows new data members to be added to
it.
Which interface should you implement in the data contract class?
A.ICommunicationObject
B.IExtension<T>
C.IExtensibleObject<T>
D.IExtensibleDataObject
Answer: D
Microsoft参考書 70-513 70-513問題集 70-513認証試験
NO.4 A Windows Communication Foundation (WCF) application uses the following data contract
[DataContract]
public class Person
{
[DataMember]
public string firstName;
[DataMember]
public string lastName;
[DataMember]
public int age;
[DataMember]
public int ID;
}
You need to ensure that the following XML segment is generated when the data contract is serialized.
<Person>
<firstName xsi:nil="true"/>
<lastName xsi:nil="true"/>
<ID>999999999<ID>
</Person>
Which code segment should you use?
A.[DataMember]
public string firstName;
[DataMember]
public string lastName;
[DataMember(EmitDefaultValue = true)]
public int age = 0;
[DataMember(EmitDefaultvValue = true)]
public int ID = 999999999;
B.[DataMember(EmitDefaultValue = false)]
public string firstName = null;
[DataMember(EmitDefaultValue = false)]
public string lastName = null;
[DataMember(EmitDefaultValue = true)]
public int age = -1;
[DataMember(EmitDefaultValue = false)]
public int ID = 999999999;
C.[DataMember(EmitDefaultValue = true)]
public string firstName;
[DataMember(EmitDefaultValue = true)]
public string lastName;
[DataMember(EmitDefaultValue = false)]
public int age = -1;
[DataMember(EmitDefaultValue = false)]
public int ID = 999999999;
D.[DataMember]
public string firstName = null;
[DataMember]
public string lastName = null;
[DataMember(EmitDefaultValue = false)]
public int age = 0;
[DataMember(EmitDefaultValue = false)]
public int ID = 999999999;
Answer: D
Microsoft認定試験 70-513過去問 70-513練習問題 70-513
NO.5 A Windows Communication Foundation (WCF) client configuration file contains the following XML
segment in the system.serviceModel element.
<client>
<endpoint address="net.tcp://server/ContosoService"
binding="netTcpBinding"
contract="Contoso.IContosoService"
name="netTcp"/>
<endpoint address="net.pipe://localhost/ContosoService"
binding="netNamedPipeBinding"
contract="Contoso.IContosoService"
name="netPipe" />
</client>
You need to create a channel factory that can send messages to the endpoint listening at
net.pipe://localhost/ContosoService.
Which code segment should you use?
A.ChannelFactory<Contoso.IContoso> factory = new
ChannelFactory<Contoso.IContoso>("Contoso.IContoso");
B.ChannelFactory<Contoso.IContoso> factory = new
ChannelFactory<Contoso.IContoso>("netNamedPipeBinding");
C.ChannelFactory<Contoso.IContoso> factory = new ChannelFactory<Contoso.IContoso>("netPipe");
D.ChannelFactory<Contoso.IContoso> factory = new
ChannelFactory<Contoso.IContoso>("net.pipe//localhost/ContosoService");
Answer: C
Microsoft過去問 70-513 70-513認定試験
NO.6 rc.FilterTable.Add(new MatchAllMessageFilter(), lep);
NO.7 host.Description.Behaviors.Add(new RoutingBehavior(rc));
Request-reply operations are failing. You need to ensure that the router can handle one-way and
request-reply operations.
What should you do?
A.Change line 03 as follows:
typeof(IRequestReplyRouter),
B.Change line 03 as follows:
typeof(IDuplexSessionRouter),
C.Change line 10 as follows:
typeof(IRequestReplyRouter)
D.Change line 10 as follows:
typeof(IDuplexSessionRouter)
Answer: B
Microsoft認定資格 70-513 70-513認定資格 70-513 70-513 70-513参考書
12.You are modifying an existing Windows Communication Foundation (WCF) service that is defined as
follows:
[ServiceContract]
public interface IMessageProcessor
{
[OperationContract]
void ProcessMessages();
}
public class MessageProcessor: IMessageProcessor
{
public void ProcessMessage();
SubmitOrder();
}
SubmitOrder makes a call to another service. The ProcessMessage method does not perform as
expected under a heavy load.
You need to enable processing of multiple messages. New messages must only be processed when the
ProcessMessage method is not processing requests,
or when it is waiting for calls to SubmitOrder to return.
Which attribute should you apply to the MessageProcessor class?
A.CallbackBehavior(ConcurrencyMode=ConcurencyMode.Reentrant)
B.CallbackBehavior(ConcurrencyMode=ConcurrencyMode.Multiple)
C.ServiceBehavior(ConcurrencyMode=ConcurrencyMode.Reentrant)
D.ServiceBehavior(ConcurrencyMode=ConcurrencyMode.Multiple)
Answer: C
Microsoft 70-513 70-513練習問題 70-513過去問 70-513認定試験
13.A Windows Communication Foundation (WCF) service listens for messages at
net.tcp://www.contoso.com/MyService.
It has a logical address at http://www.contoso.com/MyService. The configuration for the WCF client is as
follows:
<endpoint address="http://www.contoso.com/MyService"
binding="netTcpBinding"
bindingConfiguraton="NetTcpBinding_IMyService"
contract="ServiceReference1.IMyService"
name="NetTcpBinding_IMyService"/>
The generated configuration does not provide enough information for the client to communicate with the
server.
You need to update the client so that it can communicate with the server. What should you do?
A.In the client configuration, change the value of the address attribute to
net.tcp://www.contoso.com/MyService
B.In the client configuration, change the value of the address attribute to
net.tcp://www.contoso.com/MyService listen=http://www.contoso.com/MyService.
C.After instantiating the client and before invoking any service operation, add this line of code.
EndpointBehaviors.Add(new EndpointDiscoveryBehavior(){ Enabled = true });
D.After instantiating the client and before invoking any service operation, add this line of code.
client.Endpoint.Behaviors.Add(new ClientViaBehavior(new
Uri("net.tcp://www.contoso.com/IMyService")));
Answer: D
Microsoft 70-513 70-513過去問 70-513問題集 70-513
14.A Windows Communication Foundation (WCF) service is self-hosted in a console application.
The service implements the IDataAccess contract, which is defined in the MyApplication namespace.
The service is implemented in a class named DataAccessService which implements the IDataAccess
interface and also is defined in the MyApplication namespace. The hosting code is as follows.
(Line numbers are included for reference only.)
01 static void Main(string[] args)
02 {
03 ServiceHost host;
04 ...
05 host.Open();
06 Console.ReadLine();
07 host.Close();
08 }
You need to create a ServiceHost instance and assign it to the host variable. You also need to instantiate
the service host.
Which line of code should you insert at line 04?
A.host = new ServiceHost("MyApplication.DataAccessService");
B.host = new ServiceHost("MyApplication.DataAccess");
C.host = new ServiceHost(typeof(IDataAccess));
D.host = new ServiceHost(typeof(DataAccessService));
Answer: D
Microsoft 70-513問題集 70-513認定資格
15.A Windows Communication Foundation (WCF) service implements the following contract.
[ServiceContract]
public interface IHelloService
{
[OperationContract(WebGet(UriTemplate="hello?name={name}"))]
string SayHello(string name);
}
The implementation is as follows:
public class HelloService: IHelloService
{
public string SayHello(string name)
{
return "Hello " + name;
}
}
The service is self-hosted, and the hosting code is as follows:
WebServiceHost svcHost = CreateHost();
svcHost.Open();
Console.ReadLine();
svcHost.Close();
You need to implement CreateHost so that the service has a single endpoint hosted at
http://localhost:8000/HelloService.
Which code segment should you use?
A.WebServiceHost svcHost = new WebServiceHost(typeof(HelloService));
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"http://localhost:8000/HelloService");
return svcHost;
B.Uri baseAddress = new Uri("http://localhost:8000");
WebServiceHost svcHost = new WebServiceHost(typeof(HelloService), baseAddress);
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"HelloService");
return svcHost;
C.WebServiceHost svcHost = new WebServiceHost(new HelloService());
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"http://localhost:8000/HelloService");
retumn svcHost
D.Uri baseAddress = new Uri("http://localhost:8000/");
WebServiceHost svcHost = new WebServiceHost(new HelloService(), baseAddress);
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"HelloService");
retumn svcHost;
Answer: B
Microsoft 70-513参考書 70-513 70-513
16.You are building a client for a Windows Communication Foundation (WCF) service.
You need to create a proxy to consume this service. Which class should you use?
A.ChannelFactory<TChannel>
B.ServiceHost
C.ClientRuntime
D.CommunicationObject
Answer: A
Microsoft 70-513 70-513 70-513認証試験
17.You are working with a Windows Communication Foundation (WCF) client application that has a
generated proxy named SampleServiceProxy.
When the client application is executing, in line 04 of the following code, the channel faults (Line numbers
are included for reference only.)
01 SampleServiceProxy proxy = new SampleServiceProxy();
02 try
03 {
04 proxy.ProcessInvoice(invoice);
05 }
06 catch
07 {
08 if(proxy.State == CommunicationState.Faulted)
09 {
10 ...
11 }
12 }
13 proxy.UpdateCustomer(customer);
You need to return proxy to a state in which it can successfully execute the call in line 13.
Which code segment should you use at line 10?
A.proxy.Close();
B.proxy = new SampleServiceProxy();
C.proxy.Abort();
D.proxy.Open();
Answer: B
Microsoft 70-513認定資格 70-513過去問
18.A Windows Communication Foundation (WCF) service has a callback contract. You are developing a
client application that will call this service.
You must ensure that the client application can interact with the WCF service. What should you do?
A.On the OperationContractAttribute, set the AsyncPattern property value to true.
B.On the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the
client.
C.On the client, create a proxy derived from DuplexClientBase<TChannel>.
D.On the client, use GetCallbackChannel<T>.
Answer: C
Microsoft 70-513過去問 70-513 70-513 70-513
NO.8 A class named TestService implements the following interface:
[ServiceContract]
public interface ITestService
{
[OperationContract]
DateTime GetServiceTime();
}
TestService is hosted in an ASP.NET application.
You need to modify the application to allow the GetServiceTime method to return the data formatted as
JSON.
It must do this only when the request URL ends in /ServiceTime. What should you do?
A.Add this attribute to the GetServiceTime method.
[WebInvoke(Method="POST")]
In the web.config file, add this element to system.serviceModel/behaviors/endpointBehaviors.
<behavior name="Json">
<enableWebScript />
</behavior>
In the web.config file, configure TestService in the system.serviceModel/services collection as follows:
<service name="TestService">
<endpoint address="/ServiceTime"
contract="TestService"
behaviorConfiguration="Json"
binding="webHttpBinding" />
</service>
B.Add this attribute to the GetServiceTime method.
[WebInvoke(Method="GET", UriTemplate="/ServiceTime", ResponseFormat=WebMessageFormat.Json)]
In the web.config file, configure TestService in the system.serviceModel/services collection as follows:
<service name="TestService">
<endpoint address="/ServiceTime"
contract="TestService"
binding="webHttpBinding"/>
</service>
C.Add this attribute to the GetServiceTime method
[WebGet(ResponseFormat=WebMessageFormat.Json, UriTemplate="/ServiceTime")]
Create a new svc file named Jsonversion.svc with the following content.
<% @ServiceHost Service="TestService"
Factory="System.ServiceModel.ActivationWebServiceHostFactory" %>
D.Add this attribute to the GetServiceTime method.
[WebGet(UriTemplate="Json)/ServiceTime")]
Create a new .svc file named Jsonversion.svc with the following content
<% @ServiceHost Service="TestService"
Factory="System.ServiceModel.ActivationWebServiceHostFactory" %>
Answer: C
Microsoft 70-513問題集 70-513 70-513認定証 70-513
NO.9 You are creating a Windows Communication Foundation (WCF) service that is implemented as follows.
(Line numbers are included for reference only.)
01 [ServiceContract]
02 [ServiceBehavior(IncludeExceptionDetailsInFaults = true)]
03 public class OrderService
04 {
05 [OperationContract]
06 public void SubmitOrder(Order anOrder)
07 {
08 try
09 {
10 ...
11 }
12 catch(DivideByZeroException ex)
13 {
14 ...
15 }
16 }
17 }
You need to ensure that the stack trace details of the exception are not included in the error information
sent to the client.
What should you do?
A.Replace line 14 with the following line:
throw;
B.Replace line 14 with the following line:
throw new FaultException<Order>(anOrder, ex.ToString());
C.After line 05, add the following line:
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line:
throw ex;
D.Alter line 05, add the following line:
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line:
throw new FaultException<Order>(anOrder, "Divide by zero exception");
Answer: D
Microsoft 70-513 70-513 70-513問題集
NO.10 You are creating a Windows Communication Foundation (WCF) service. You do not want to expose the
internal implementation at the service layer.
You need to expose the following class as a service named Arithmetic with an operation named Sum:
public class Calculator
{
public int Add(int x, int y)
{
}
}
Which code segment should you use?
A.[ServiceContract(Namespace="Arithmetic")]
public class Calculator
{
[Operation Contract(Action="Sum")]
public int Add(int x, int y)
{}
}
B.[ServiceContract(ConfigurationName="Arithmetic")]
public class Calculator
{
[Operation Contract(Action="Sum")]
public int Add(int x, int y)
{}
}
C.[ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(Name="Sum")]
public int Add(int x, int y)
{}
}
D.[ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(ReplyAction="Sum")]
public int Add(int x, int y)
{}
}
Answer: C
Microsoft 70-513 70-513
NO.11 );
NO.12 A Windows Communication Foundation (WCF) application uses a data contract that has several data
members.
You need the application to throw a SerializationException if any of the data members are not present
when a serialized instance of the data contract is deserialized.
What should you do?
A.Add the KnownType attribute to the data contract.
Set a default value in each of the data member declarations.
B.Add the KnownType attribute to the data contract.
Set the Order property of each data member to unique integer value.
C.Set the EmitDefaultValue property of each data member to false.
D.Set the lsRequired property of each data member to true.
Answer: D
Microsoft 70-513 70-513 70-513認定資格 70-513認定証
NO.13 new EndpointAddress("net.tcp://localhost:8080/Logger")
NO.14 RoutingConfiguration rc = new RoutingConfiguration();
NO.15 )
NO.16 You are developing a client that sends several types of SOAP messages to a Windows Communication
Foundation (WCF)
service method named PostData. PostData is currently defined as follows:
[OperationContract]
void PostData(Order data);
You need to modify PostData so that it can receive any SOAP message. Which code segment should
you use?
A.[OperationContract(IsOneWay=true, Action="*", ReplyAction="*")]
void PostData(Order data);
B.[OperationContract(IsOneWay=true, Action="*", ReplyAction = "*")]
void PostData(BodyWriter data);
C.[OperationContract]
void PostData(BodyWriter data);
D.[OperationContract]
void PostData(Message data);
Answer: D
Microsoft参考書 70-513 70-513 70-513認定試験 70-513参考書
NO.17 new NetTcpBinding(),
NO.18 You are creating a Windows Communication Foundation (WCF) service. You have the following
requirements:
Messages must be sent over TCP
The service must support transactions.
Messages must be encoded using a binary encoding
Messages must be secured using Windows stream-based security.
You need to implement a custom binding for the service. In which order should the binding stack be
configured?
A.tcpTransport, windowsStreamSecurity, transactionFlow, binaryMessageEncoding
B.transactionFlow, binaryMessageEncoding, windowsStreamSecurity, tcpTransport
C.windowsStreamSecurity, tcpTransport, binaryMessageEncoding, transactionFlow
D.binaryMessageEncoding, transactionFlow, tcpTransport, windowsStreamSecurity
Answer: B
Microsoft過去問 70-513 70-513認定試験 70-513問題集
NO.19 You are creating a Windows Communication Foundation (WCF) service that implements operations in a
RESTful manner.
You need to add a delete operation. You implement the delete method as follows:
void DeleteItems(string id);
You need to configure WCF to call this method when the client calls the service with the HTTP DELETE
operation. What should you do?
A.Add the WebInvoke(UriTemplate="/Items/{id}", Method="DELETE") attribute to the operation
B.Add the HttpDelete atribute to the operation
C.Replace the string parameter with a RemovedActivityAction parameter
D.Replace the return type with RemovedActivityAction.
Answer: A
Microsoft 70-513 70-513問題集 70-513
NO.20 The following is an example of a SOAP envelope.
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope">
<s:Header>
<h:StoreId xmlns:h="http://www.contoso.com">6495</h:StoreId>
</s:Header>
<s:Body>
<CheckStockRequest xmlns="http://www.contoso.com">
<ItemId>2469<ItemId>
</CheckStockRequest>
</s: Body>
</s:Envelope>
You need to create a message contract that generates the SOAP envelope.
Which code segment should you use?
A.[MessageContract(WrapperName="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember(Namespace="http://www.contoso.com")]
public int ItemId { get; set; }
}
B.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember(Namespace="http://www contoso.com")]
public int ItemId { get; set; }
}
C.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
public int ItemId { get; set; }
}
D.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember]
public int ItemId { get; set; }
}
Answer: D
Microsoft 70-513 70-513認証試験 70-513
Pass4Testは最新のIIA-CCSA試験問題集と高品質の1Z0-061認定試験の問題と回答を提供します。Pass4TestのJN0-696 VCEテストエンジンと70-484試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のIIA-CIA-Part1トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论