2013年7月7日星期日

Network ApplianceのNS0-502認証の最優秀問題集

最もリラックスした状態ですべての苦難に直面しています。Network ApplianceのNS0-502試験はとても難しいですが、受験生の皆がリラックスした状態で試験を受けるべきです。。Pass4TestのNetwork ApplianceのNS0-502試験トレーニング資料は私達を助けられます。Pass4Testがそばにいてくれると、恐くなくなり、迷わなくなります。Pass4TestのNetwork ApplianceのNS0-502試験トレーニング資料は私達受験生の最良の選択です。


Pass4Testは多くの認証業界の評判を持っています。それは我々はNetwork ApplianceのNS0-502問題集やNS0-502スタディガイドやNS0-502問題と解答がたくさんありますから。現在のサイトで最もプロなITテストベンダーとして我々は完璧なアフターサービスを提供します。全てのお客様に追跡サービスを差し上げますから、あなたが買ったあとの一年間で、弊社は全てのお客様に問題集のアップグレードを無料に提供します。その間で認定テストセンターのNetwork ApplianceのNS0-502試験問題は修正とか表示されたら、無料にお客様に保護して差し上げます。Network ApplianceのNS0-502試験問題集はPass4TestのIT領域の専門家が心を込めて研究したものですから、Pass4TestのNetwork ApplianceのNS0-502試験資料を手に入れると、あなたが美しい明日を迎えることと信じています。


購入前にPass4Testが提供した無料の問題集をダウンロードできます。自分の練習を通して、試験のまえにうろたえないでしょう。Pass4Testを選択して専門性の訓練が君の試験によいだと思います。


試験番号:NS0-502問題集

試験科目:Network Appliance 「NetApp Certified Implementation Engineer-SAN and Virtualization」

Pass4Testが提供したNetwork ApplianceのNS0-502トレーニング資料を利用してから試験に合格することがとてもたやすことになって、これは今までがないことです。これは試験に合格した受験生の一人が言ったのです。Pass4Testが提供したNetwork ApplianceのNS0-502トレーニング資料はあなたの雑然とした考えを整理できます。そうしたらあなたは心理的なストレスを減らせるだけでなく、気楽に試験に受かることもできます。Pass4Testには一部の問題と解答を無料に提供して差し上げますから、もし私の話を信じないのなら、試用版を使ってみてください。利用してみたら効果があるかどうか自分でよく知っているようになります。あなたに絶対向いていると信じていますよ。


Network ApplianceのNS0-502試験に受かることは確かにあなたのキャリアに明るい未来を与えられます。Network ApplianceのNS0-502試験に受かったら、あなたの技能を検証できるだけでなく、あなたが専門的な豊富の知識を持っていることも証明します。Pass4TestのNetwork ApplianceのNS0-502試験トレーニング資料は実践の検証に合格したソフトで、手に入れたらあなたに最も向いているものを持つようになります。 Pass4TestのNetwork ApplianceのNS0-502試験トレーニング資料を購入する前に、無料な試用版を利用することができます。そうしたら資料の高品質を知ることができ、一番良いものを選んだということも分かります。


購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/NS0-502.html


NO.1 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B

Network Appliance問題集   NS0-502認定証   NS0-502   NS0-502

NO.2 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C

Network Appliance認証試験   NS0-502認定証   NS0-502   NS0-502認証試験

NO.3 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A

Network Appliance   NS0-502認定資格   NS0-502認証試験

NO.4 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C

Network Appliance練習問題   NS0-502   NS0-502   NS0-502認証試験

NO.5 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B

Network Appliance認定試験   NS0-502認証試験   NS0-502認定資格   NS0-502認証試験

NO.6 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B

Network Appliance   NS0-502   NS0-502   NS0-502過去問   NS0-502   NS0-502過去問

NO.7 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D

Network Appliance認定試験   NS0-502練習問題   NS0-502   NS0-502   NS0-502過去問

NO.8 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD

Network Appliance問題集   NS0-502   NS0-502

NO.9 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A

Network Appliance   NS0-502   NS0-502   NS0-502

NO.10 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance   NS0-502   NS0-502参考書   NS0-502

NO.11 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D

Network Appliance   NS0-502   NS0-502   NS0-502参考書

NO.12 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B

Network Appliance   NS0-502問題集   NS0-502認定証   NS0-502過去問   NS0-502

NO.13 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B

Network Appliance   NS0-502   NS0-502過去問   NS0-502

NO.14 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D

Network Appliance   NS0-502問題集   NS0-502   NS0-502   NS0-502参考書

NO.15 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D

Network Appliance   NS0-502参考書   NS0-502   NS0-502   NS0-502

NO.16 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD

Network Appliance認定試験   NS0-502過去問   NS0-502

NO.17 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance認証試験   NS0-502問題集   NS0-502   NS0-502

NO.18 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B

Network Appliance参考書   NS0-502問題集   NS0-502

NO.19 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D

Network Appliance参考書   NS0-502認証試験   NS0-502   NS0-502過去問

NO.20 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B

Network Appliance   NS0-502過去問   NS0-502過去問   NS0-502

Network ApplianceのNS0-502認証試験の合格証は多くのIT者になる夢を持つ方がとりたいです。でも、その試験はITの専門知識と経験が必要なので、合格するために一般的にも大量の時間とエネルギーをかからなければならなくて、助簡単ではありません。Pass4Testは素早く君のNetwork Appliance試験に関する知識を補充できて、君の時間とエネルギーが節約させるウェブサイトでございます。Pass4Testのことに興味があったらネットで提供した部分資料をダウンロードしてください。


没有评论:

发表评论