Pass4Testの商品はIT業界の専門家が自分の豊かな知識と経験を利用して認証試験に対して研究出たので品質がいいの試験の資料でございます。受験者がPass4Testを選択したら高度専門の試験に１００％合格することが問題にならないと保証いたします。
Pass4TestのNetwork ApplianceのNS0-510 NS0-501 NS0-163 NS0-120 NS0-102 NS0-101試験トレーニング資料はIT認証試験を受ける人々の必需品です。このトレーニング資料を持っていたら、試験のために充分の準備をすることができます。そうしたら、試験に受かる信心も持つようになります。Pass4TestのNetwork ApplianceのNS0-510 NS0-501 NS0-163 NS0-120 NS0-102 NS0-101試験トレーニング資料は特別に受験生を対象として研究されたものです。インターネットでこんな高品質の資料を提供するサイトはPass4Testしかないです。
試験番号：NS0-510問題集
試験科目：Network Appliance 「NCIE - Backup and Recovery Implementation Engineer Exam」
試験番号：NS0-501問題集
試験科目：Network Appliance 「Network Appliance Implementation Engineer-SAN」
試験番号：NS0-163問題集
試験科目：Network Appliance 「Network Appliance Data Protection Solutions」
試験番号：NS0-120問題集
試験科目：Network Appliance 「Data ONTAP Advanced Exam」
試験番号：NS0-102問題集
試験科目：Network Appliance 「NetApp(ASAP) Accredited Storage Architect Professional」
試験番号：NS0-101問題集
試験科目：Network Appliance 「NetApp Accredited Sales Professional Exam」
Pass4Testは正確な選択を与えて、君の悩みを減らして、もし早くてNetwork Appliance NS0-510 NS0-501 NS0-163 NS0-120 NS0-102 NS0-101認証をとりたければ、早くてPass4Testをショッピングカートに入れましょう。あなたにとても良い指導を確保できて、試験に合格するのを助けって、Pass4Testからすぐにあなたの通行証をとります。
まだNetwork ApplianceのNS0-510 NS0-501 NS0-163 NS0-120 NS0-102 NS0-101認定試験を悩んでいますかこの情報の時代の中で専門なトレーニングを選択するのと思っていますか？良いターゲットのトレーニングを利用すれば有効で君のIT方面の大量の知識を補充 できます。Network ApplianceのNS0-510 NS0-501 NS0-163 NS0-120 NS0-102 NS0-101認定試験によい準備ができて、試験に穏やかな心情をもって扱うことができます。Pass4Testの専門家が研究された問題集を利用してください。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/NS0-163.html
NO.1 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B
Network Appliance NS0-163 NS0-163 NS0-163認定証 NS0-163
NO.2 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A
Network Appliance NS0-163認定試験 NS0-163認定証
NO.3 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C
Network Appliance問題集 NS0-163参考書 NS0-163
NO.4 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C
Network Appliance NS0-163過去問 NS0-163 NS0-163認定試験
NO.5 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D
Network Appliance NS0-163認証試験 NS0-163 NS0-163 NS0-163過去問
NO.6 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A
Network Appliance NS0-163認証試験 NS0-163認定資格 NS0-163認定証 NS0-163 NS0-163
NO.7 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D
Network Appliance認証試験 NS0-163認証試験 NS0-163認定証 NS0-163問題集 NS0-163 NS0-163
NO.8 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B
Network Appliance NS0-163問題集 NS0-163 NS0-163認定証 NS0-163認証試験 NS0-163問題集
NO.9 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D
Network Appliance NS0-163 NS0-163
NO.10 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD
Network Appliance認定証 NS0-163認定資格 NS0-163 NS0-163練習問題
NO.11 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D
Network Appliance NS0-163 NS0-163認証試験
NO.12 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B
Network Appliance認定試験 NS0-163 NS0-163
NO.13 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B
Network Appliance認証試験 NS0-163認定資格 NS0-163認定資格 NS0-163認定試験 NS0-163参考書
NO.14 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD
Network Appliance認定証 NS0-163 NS0-163 NS0-163練習問題
NO.15 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D
Network Appliance NS0-163過去問 NS0-163練習問題 NS0-163参考書 NS0-163参考書
NO.16 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A
Network Appliance認定資格 NS0-163 NS0-163
NO.17 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B
Network Appliance NS0-163認定証 NS0-163 NS0-163 NS0-163 NS0-163参考書
NO.18 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D
Network Appliance問題集 NS0-163 NS0-163 NS0-163
NO.19 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C
Network Appliance参考書 NS0-163 NS0-163 NS0-163
NO.20 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B
Network Appliance問題集 NS0-163 NS0-163問題集
没有评论:
发表评论