HitachiのHH0-210認定試験に受かりたいのなら、適切なトレーニングツールを選択する必要があります。HitachiのHH0-210認定試験に関する研究資料が重要な一部です。我々Pass4TestはHitachiのHH0-210認定試験に対する効果的な資料を提供できます。Pass4TestのIT専門家は全員が実力と豊富な経験を持っているのですから、彼らが研究した材料は実際の試験問題と殆ど同じです。Pass4Testは特別に受験生に便宜を提供するためのサイトで、受験生が首尾よく試験に合格することを助けられます。
HH0-210試験はHitachiの認定試験の一つですが、もっとも重要なひとつです。HitachiのHH0-210の認定試験に合格するのは簡単ではなくて、Pass4TestはHH0-210試験の受験生がストレスを軽減し、エネルギーと時間を節約するために専門研究手段として多様な訓練を開発して、Pass4Testから君に合ったツールを選択してください。
我々はHitachiのHH0-210試験問題と解答また試験シミュレータを最初に提供し始めたとき、私達が評判を取ることを夢にも思わなかった。我々が今行っている保証は私たちが信じられないほどのフォームです。HitachiのHH0-210試験はPass4Testの保証を検証することができ、１００パーセントの合格率に達することができます。
現在、IT業界での激しい競争に直面しているあなたは、無力に感じるでしょう。これは避けられないことですから、あなたがしなければならないことは、自分のキャリアを護衛するのです。色々な選択がありますが、Pass4TestのHitachiのHH0-210問題集と解答をお勧めします。それはあなたが成功認定を助ける良いヘルパーですから、あなたはまだ何を待っているのですか。速く最新のPass4TestのHitachiのHH0-210トレーニング資料を取りに行きましょう。
HH0-210認定試験を受験したいですか。HH0-210認証資格を取得したいですか。試験に準備する時間が足りないあなたは、どうやって試験に合格できますか。しようがないわけではないです。短時間の準備でも楽に試験に合格することができるようになりますよ。それでは、どのようにすればそれを達成できますか。実は方法がとても簡単です。すなわちPass4TestのHH0-210問題集を利用して試験の準備をすることです。
より効果的に試験に合格する方法がわからないなら、私は良いトレーニングサイトを選ぶというアドバイスを差し上げます。そうしたら半分の労力で二倍の効果を得ることができますから。Pass4Testはいつまでも受験生の皆さんにHitachiのHH0-210認証試験の真実な試験トレーニング資料を提供することに力を尽くしています。Pass4TestのHitachiのHH0-210認証試験の問題集はソフトウェアベンダーがオーソライズした製品で、カバー率が高くて、あなたの大量の時間とエネルギーを節約できます。
試験番号：HH0-210問題集
試験科目：Hitachi 「HDS Certified Implmenter-Enterprise」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-03-10
問題と解答：全120問
君はまずネットで無料なHitachiのHH0-210試験問題をダウンロードしてから 弊社の品質を確信してから、購入してください。Pass4Testは提供した商品は君の成功を全力で助けさしたげます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/HH0-210.html
NO.1 You are installing a new Hitachi Universal Storage Platform V system and need to exchange the short
wave SFP transceivers with the long wave type.
To perform the exchange, which two actions are required? (Choose two.)
A.Confirm successful replacement by checking that SFP indicators have changed from blue to green on
the Storage Navigator main screen.
B.Run the SFP exchange wizard.
C.Set SFP mode on the SVP.
D.Confirm successful replacement by checking 'SFP kind' information on the maintenance screen.
ANSWER: CD
Hitachi HH0-210 HH0-210 HH0-210
NO.2 You have created a Storage Device List and some User Accounts within Storage Navigator. The SVP
has since failed and must be replaced.
How can you create a backup of this information so it can be easily restored after the failed SVP is
replaced?
A.Restore the ghost image available on the SVP.
B.Use HiSat to keep track of the information in a CSV format.
C.Ask the customer engineer to copy the source files from the SVP.
D.Use the download configuration function of the Storage Navigator control panel.
ANSWER: D
Hitachi HH0-210 HH0-210認証試験 HH0-210 HH0-210
NO.3 You install a temporary license for a specific feature.
How long is the feature available on a Hitachi Enterprise storage system?
A.45 days
B.90 days
C.120 days
D.180 days
ANSWER: C
Hitachi HH0-210認定資格 HH0-210認定資格 HH0-210認定証 HH0-210
NO.4 You need to enable Copy-on-Write SnapShot software on a Hitachi Universal Storage Platform VM.
Which two are required? (Choose two.)
A.remote replication license
B.ShadowImage license
C.additional cache memory
D.additional shared memory
ANSWER: BD
Hitachi HH0-210参考書 HH0-210練習問題 HH0-210
NO.5 You are connecting a Hitachi AMS2000 Family (AMS) system as external storage behind a Hitachi
Universal Storage Platform V. You are using one path to each controller on the AMS2000 system.
Which statement describes how to complete the configuration?
A.Enable intermittent error monitoring for both paths.
B.Set path mode to "Multi".
C.No special setting is needed.
D.Set the primary path to point to the AMS default controller.
ANSWER: C
Hitachi認定試験 HH0-210練習問題 HH0-210認証試験 HH0-210 HH0-210
NO.6 Which three factors must be considered when planning a Non-stop SCSI microcode exchange on a
Universal Storage Platform V? (Choose three.)
A.Force production host data paths to failover to the alternate cluster.
B.Schedule a time when the I/O workload is low.
C.Confirm that all LUNs, external storage, and remote replication links have multiple paths across both
clusters.
D.Save the contents of the shared memory to the SVP hard disk.
E.Ensure that the microprocessors are less than 50 percent busy.
ANSWER: BCE
Hitachi HH0-210参考書 HH0-210
NO.7 You are enabling the Syslog transfer in Storage Navigator to send the Syslog output to the primary
Syslog server.
Which two additional settings must be made to allow the transfer? (Choose two.)
A.the primary server subnet settings
B.the IP address of the primary server
C.the Syslog file format
D.the port number for the primary server
ANSWER: BD
Hitachi HH0-210認証試験 HH0-210
NO.8 What information is displayed on the Information tab page of Storage Navigator? (Choose two.)
A.the device view of the connected system
B.the product name of the connected system
C.the information for the root user of the connected device
D.the microcode version of the storage system
ANSWER: BD
Hitachi認定資格 HH0-210練習問題 HH0-210 HH0-210認証試験
NO.9 What is the purpose of the System Assurance Document?
A.to ensure accurate and complete record of pre-installation data
B.to guarantee that HDS equipment is insured during transportation
C.to inform a channel partner that equipment is available for shipment
D.to validate configuration changes for customers with a premium service contract
ANSWER: A
Hitachi認定資格 HH0-210 HH0-210問題集 HH0-210過去問
NO.10 A TrueCopy project has the following requirements: Copy from site_A (Host_A) to site_B (Host_B).
You have defined two instances (horcm0.conf and horcm1.conf) for the application and one Command
Device (CMD_A on site_A and CMD_B on site_B.)
What are two valid combinations of distributing the instances and defining access to the Command
Devices on the different sites? (Choose two.)
A.Host_A has access to CMD_A and CMD_B and runs horcm0.conf and horcm1.conf.
B.Host_A has access to CMD_A and runs horcm0.conf. Host_B has access to CMD_A and runs
horcm1.conf.
C.Host_A has access to CMD_A and runs horcm0.conf. Host_B has access to CMD_B and runs
horcm1.conf.
D.Host_A has access to CMD_B and runs horcm0.conf. Host_B has access to CMD_B and runs
horcm1.conf.
ANSWER: AC
Hitachi認定資格 HH0-210 HH0-210問題集 HH0-210 HH0-210練習問題
NO.11 Which two steps must be taken when performing a microcode exchange on a Hitachi Universal
Storage Platform VM? (Choose two.)
A.Disconnect the SVP from the customer LAN.
B.Confirm that all components are at the correct starting code level.
C.Update SVP microcode last.
D.Resolve all SIMS before beginning a microcode exchange.
ANSWER: BD
Hitachi HH0-210 HH0-210
NO.12 Which ShadowImage operation is permitted when using Storage Navigator?
A.Manage pairs and manage consistency groups
B.Manage pairs but not manage consistency groups
C.Manage pairs only within consistency groups
D.Manage pairs in journal groups
ANSWER: B
Hitachi HH0-210 HH0-210認定資格
NO.13 Which two topology settings should be used when connecting a Hitachi Universal Storage Platform V
to a SAN switch? (Choose two.)
A.Public Loop
B.Private Loop
C.Point-to-Point
D.Fabric
ANSWER: CD
Hitachi HH0-210 HH0-210 HH0-210過去問
NO.14 Which three statements describe the Service Processor (SVP) of the Hitachi Universal Storage
Platform VM? (Choose three.)
A.The SVP does have a display and keyboard.
B.The SVP has access to user data stored on the system.
C.Connecting the SVP with a service center enables remote maintenance of the system.
D.The SVP collects performance data for all key components of the system.
E.The SVP enables the service representative to configure, maintain and upgrade the system.
ANSWER: CDE
Hitachi HH0-210 HH0-210 HH0-210 HH0-210
NO.15 A customer is using a Hitachi Enterprise storage system with clustered servers in an active/passive
relationship.
What must be done in Hitachi Dynamic Link Manager (HDLM) to ensure that the status of inactive paths
on both passive and active nodes is monitored regularly?
A.Switch on Auto failback.
B.Setup intermittent Error Monitoring.
C.Switch on Path Health Check.
D.Set the reservation level to 2.
ANSWER: C
Hitachi HH0-210過去問 HH0-210 HH0-210
NO.16 After completing a Hitachi Universal Storage Platform V installation or before upgrading the microcode,
which tool must you use to ensure that the SVP can communicate with all components of the system?
A.ping
B.traceroute
C.a network sniffer
D.diags LAN TEST
ANSWER: D
Hitachi HH0-210 HH0-210認証試験 HH0-210認定資格 HH0-210
NO.17 Which two activities can be performed without interrupting user access to data in a Hitachi Enterprise
storage system? (Choose two.)
A.Upgrade Cache Memory from 32GB to 64GB.
B.Run the CUDG4 (Control Unit DiaGnosis) test.
C.Change the DKC system emulation type.
D.Change a 2Gbps Fibre Channel feature to a 4Gbps Fibre Channel feature.
ANSWER: AD
Hitachi認定証 HH0-210認定証 HH0-210 HH0-210認定証
NO.18 Which three microcode exchange procedure modes are available in a Hitachi Enterprise storage
system? (Choose three.)
A.Alternate SCSI path
B.Non-Stop SCSI host
C.Postponed SCSI path
D.Skip SCSI microprocessor
E.Skip SCSI channel adapter
ANSWER: ABE
Hitachi問題集 HH0-210認定証 HH0-210認証試験 HH0-210認定試験 HH0-210認定証
NO.19 When is a microcode exchange process complete on a Hitachi Universal Storage Platform V?
A.When the message "An exchange of a microprogram finished" is displayed.
B.When all I/O resumes across all the mapped storage paths.
C.Once the SVP has rebooted.
D.When all the microprocessors flash memory update is complete.
ANSWER: D
Hitachi HH0-210 HH0-210 HH0-210認定資格 HH0-210認定資格
NO.20 To which two LANs must the SVP of a Hitachi Universal Storage Platform V be attached? (Choose two.)
A.customer's intranet
B.USP V internal LAN
C.HiTrack dedicated user port
D.secure management LAN
ANSWER: BD
Hitachi認定証 HH0-210 HH0-210 HH0-210問題集
Pass4Testは最新のHP2-B104試験問題集と高品質のVDCD510認定試験の問題と回答を提供します。Pass4TestのC_TSCM62_65 VCEテストエンジンとCUR-011試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のJN0-314トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论