2014年3月13日星期四

HP HP0-S17認定試験の最高の問題集の一部を無料で捧げる

Pass4Testの助けのもとで君は大量のお金と時間を费やさなくても復楽にHPのHP0-S17認定試験に合格のは大丈夫でしょう。ソフトの問題集はPass4Testが実際問題によって、テストの問題と解答を分析して出来上がりました。Pass4Testが提供したHPのHP0-S17の問題集は真実の試験に緊密な相似性があります。

いつもあなたに最高のHP0-S17認定試験に関連する試験参考書を与えられるために、Pass4Testは常に問題集の質を改善し、ずっと最新の試験のシラバスに応じて問題集を更新しています。現在の市場では、Pass4Testはあなたの最もよい選択です。長い間にわたって、Pass4Testは多くの受験生に認可されました。私を信じていないなら、周りの人々に聞いてみてもいいです。Pass4Testの試験問題集を利用したことがある人がきっといますから。Pass4Testは最優秀な試験HP0-S17参考書を提供してあなたを試験に合格させることを保証します。

Pass4Testは君の試験に合格させるだけでなく本当の知識を学ばれます。Pass4Testはあなたが100% でHP0-S17試験に合格させるの保証することができてまたあなたのために一年の無料の試験の練習問題と解答の更新サービス提供して、もし試験に失敗したら、弊社はすぐ全額で返金を保証いたします。

試験番号:HP0-S17問題集
試験科目:HP 「Integrating and Managing HP BladeSystem in the Enterprise」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2014-03-13
問題と解答:全130問

Pass4TestはHPのHP0-S17試験に関する完全な資料を唯一のサービスを提供するサイトでございます。Pass4Testが提供した問題集を利用してHPのHP0-S17試験は全然問題にならなくて、高い点数で合格できます。HP HP0-S17試験の合格のために、Pass4Testを選択してください。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/HP0-S17.html

NO.1 Which ProLiant Essentials Value Pack is an integrated power monitoring and management
application that provides centralized monitoring and control of datacenter power consumption and thermal
output?
A.Insight Power Manager
B.HP Rack and Power Manager
C.Performance Management Pack
D.Vulnerability and Patch Management Pack
ANSWER: A

HP認定証   HP0-S17   HP0-S17過去問   HP0-S17

NO.2 An administrator configures an HP c7000 Enclosure using Onboard Administrator. Which option can
be used to automatically configure IP addresses for all iLO cards and interconnect modules?
A.Insight Display
B.Virtual Connect Manager
C.Interconnect LAN Manager
D.Enclosure Bay IP Addressing (EBIPA)
ANSWER: D

HP   HP0-S17   HP0-S17参考書   HP0-S17問題集

NO.3 The Virtual Connect Fibre Channel module uses which type of Port ID Virtualization protocol to
aggregate multiple Fibre Channel HBAs over a smaller number of physical uplinks?
A.E_Port
B.F_Port
C.L_Port
D.N_Port
ANSWER: D

HP   HP0-S17認定試験   HP0-S17   HP0-S17参考書

NO.4 Which industry standard processor options are supported in the HP BL460c Server Blade? (Select two.)
A.Dual-Core Intel Xeon
B.Quad-Core Intel Xeon
C.Dual-Core Intel Itanium2
D.Dual-Core AMD Opteron
E.Quad-Core AMD Opteron
ANSWER: AB

HP   HP0-S17認定資格   HP0-S17参考書   HP0-S17   HP0-S17

NO.5 A customer has a Virtual Connect managed enclosure and needs to move one of the blades to a
non-virtual connect enclosure.
What should be done so that duplicate MAC addresses and WWNs do not appear in the datacenter due
to server blade deployment?
A.Enable the Reset to factory default switch on the blade system board.
B.Run the erase utility on the blade before plugging the server to the network.
C.First delete all MAC and WWNs configurations while the server is in the VC managed enclosure and
then move the server to the non-VC managed enclosure.
D.MAC addresses and WWNs are automatically returned to factory defaults when the server is moved to
the non-Virtual connect enclosure so no duplicate MAC addresses or WWNs appear.
ANSWER: D

HP参考書   HP0-S17   HP0-S17   HP0-S17   HP0-S17

NO.6 Which industry standard memory technologies are supported in a BL465c Server Blade? (Select two.)
A.memory sparing
B.memory mirroring
C.memory interleaving
D.ECC and Advanced ECC
E.833MHz maximum speed DIMMs
ANSWER: CD

HP認証試験   HP0-S17認定証   HP0-S17   HP0-S17   HP0-S17

NO.7 Your customer wants to replace an existing c3000 Enclosure with a c7000 Enclosure. Which
components from the c3000 Enclosure can be reused in the c7000 Enclosure? (Select three.)
A.fans
B.power supplies
C.interconnect modules
D.server and storage blades
E.Onboard Administrator module
ANSWER: ACD

HP   HP0-S17   HP0-S17過去問   HP0-S17

NO.8 An administrator needs to monitor performance of every drive connected to the Smart Array controller.
Each drive is configured as a single logical drive.
Which tool can be used?
A.Insight Diagnostic
B.Radia Performance Manager
C.Performance Management Pack
D.Windows Server Performance Monitor
ANSWER: C

HP認証試験   HP0-S17   HP0-S17   HP0-S17認定試験   HP0-S17

NO.9 Which devices can be assigned an IP address through Enclosure Bay IP Addressing (EBIPA) for
c-Class server blades? (Select two.)
A.iLO 2 cards
B.interconnects
C.Insight Display
D.LAN interfaces of mezzanine cards
E.iSCSI target IP address on server blades
ANSWER: AB

HP   HP0-S17   HP0-S17認証試験   HP0-S17練習問題   HP0-S17認定試験

NO.10 What is an advantage of a c7000 Enclosure compared to a c3000 Enclosure in an enterprise
environment?
A.N+N redundancy in the power subsystem
B.Virtual Connect and storage blade support
C.interconnect redundancy for integrated NICs
D.application of Onboard Administrator advanced license
ANSWER: C

HP   HP0-S17過去問   HP0-S17   HP0-S17

NO.11 Which industry standard memory technology can be used by Intel Xeon-based c-Class server blades
to provide additional protection against failed or degrading FB-DIMMs? (Select two.)
A.Advanced ECC
B.mirrored memory
C.registered DIMMs
D.online spare memory
E.interleaved memory support
ANSWER: BD

HP参考書   HP0-S17認定資格   HP0-S17   HP0-S17認証試験

NO.12 You are administrating several c-Class enclosures and are looking for a unified authentication system
for all iLO cards and Onboard Administrator modules.
What is the proper solution?
A.HP Protect Tools
B.Credential Manager
C.Virtual Connect Enterprise Manager
D.Lightweight Directory Access Protocol (LDAP)
ANSWER: D

HP   HP0-S17練習問題   HP0-S17問題集   HP0-S17   HP0-S17

NO.13 Which interconnect module offered by HP has the capability of assigning a configuration profile to a
specific server blade?
A.GbE2c Switch
B.Cisco 3020 Switch
C.Virtual Connect Ethernet
D.Ethernet Pass-Thru Module
ANSWER: C

HP認証試験   HP0-S17過去問   HP0-S17参考書   HP0-S17認定試験

NO.14 Which interconnect option creates domains and stacks LAN modules across c7000 Enclosures?
A.GbE2c Ethernet
B.Virtual Connect Ethernet
C.Ethernet Pass-Thru Module
D.Virtual Connect Fibre Channel
ANSWER: B

HP練習問題   HP0-S17認定証   HP0-S17   HP0-S17認証試験

NO.15 Which service features are included in the Enhanced Network Installation and Startup Service for
BladeSystem Switches? (Select two.)
A.service planning interview
B.network device configuration
C.comprehensive porting and migration
D.systematic analysis of configurations for software patch version inconsistencies
E.proactive and rapid-response services to protect strategic operations against downtime risks
ANSWER: AB

HP   HP0-S17   HP0-S17認証試験   HP0-S17   HP0-S17   HP0-S17

NO.16 Which features does Virtual Connect Ethernet module (VC-Enet) provide in a network environment?
(Select two.)
A.VC-Enet can stack across four enclosures in a rack.
B.VC-Enet appears as an HP ProCurve device to other network devices.
C.VC-Enet will not add any new switches for the network administrator to manage.
D.VC-Enet domains can be created directly using the Onboard Administrator console.
ANSWER: AC

HP問題集   HP0-S17   HP0-S17   HP0-S17練習問題   HP0-S17認定試験

NO.17 Which tool tests and evaluates the hardware and software configuration of systems where HP SIM is
installed or is being considered for installation?
A.Insight Control Advisor
B.HP SIM Capacity Planner
C.Active Answers Solution Sizer
D.Site Installation Preparation Utility
ANSWER: A

HP   HP0-S17認証試験   HP0-S17   HP0-S17   HP0-S17練習問題

NO.18 Which management suite delivers core management functionality for the HP BladeSystem solution,
including server deployment, health monitoring, performance monitoring, vulnerability scanning and patch
management?
A.HP Storage Essentials
B.HP Operations Software
C.Insight Control Environment
D.HP Systems Insight Manager
ANSWER: C

HP練習問題   HP0-S17   HP0-S17   HP0-S17認定試験   HP0-S17認定証

NO.19 What is the purpose of the HP StorageWorks SB40c Storage Blade?
A.provides a blade form factor tape solution for any server supporting the TCP/IP protocol
B.provides a blade form factor networked shared storage for any server supporting IP-based storage
(iSCSI)
C.provides additional storage capabilities dedicated to a single server blade within the same c7000
Enclosure
D.provides additional storage capabilities dedicated to a single server blade in another linked c7000
Enclosure
ANSWER: C

HP   HP0-S17練習問題   HP0-S17参考書   HP0-S17

NO.20 Which industry standard protocols are used by HP SIM? (Select two.)
A.XML
B.TFTP
C.iSCSI
D.WBEM
E.NetBEUI
ANSWER: AD

HP練習問題   HP0-S17   HP0-S17

NO.21 A customer is looking for a virtualization solution for their data center. Their main area of concern is
server down time.
You have identified the x86-based virtualization candidates. Which platform best suits the customer's
needs?
A.scale-up
B.scale-out
C.Integrity VSE
D.single server virtual consolidation
ANSWER: B

HP   HP0-S17参考書   HP0-S17認定資格   HP0-S17

NO.22 A customer wants to deploy a c7000 Enclosure and six server blades in a datacenter with limited
power. How can they ensure the solution fits within the available datacenter power envelope?
A.The customer needs to make sure they have at least 6750 watts of available power in every case.
B.Use the HP BladeSystem Sizer to determine how much power is needed for the configuration they want
to deploy.
C.Use the HP Rack and Power tool to determine how much power is needed for the configuration they
want to deploy.
D.Use the Enterprise Configurator in ActiveAnswers to determine how much power is needed for the
configuration they want to deploy.
ANSWER: B

HP   HP0-S17   HP0-S17   HP0-S17認定証   HP0-S17

NO.23 You are replacing one of your redundant GbE2c interconnect switch modules in your c7000 Enclosure.
What must you be aware of when you install a replacement GbE2C switch with default settings into the
enclosure?
A.Crosslink ports are disabled and redundancy is lost between switches.
B.Crosslink ports are enabled and will cause a loop in your switch topology.
C.Uplink ports are disabled and must be enabled manually in the switch manager.
D.Downlink ports are disabled and must be enabled manually in the switch manager.
ANSWER: A

HP   HP0-S17   HP0-S17認証試験   HP0-S17練習問題   HP0-S17練習問題

NO.24 Which service features are included in the Enhanced Network Installation and Startup Service for
BladeSystem Switches? (Select two.)
A.verification of operation
B.confirmation of software revisions
C.comprehensive porting and migration
D.systematic analysis of configurations for software patch version inconsistencies
E.proactive and rapid-response services to protect strategic operations against downtime risks
ANSWER: AB

HP   HP0-S17問題集   HP0-S17認証試験   HP0-S17認証試験

NO.25 Your customer has a c7000 Enclosure and two power supplies installed in bays 1 and 2. They are
switching from single-phase power to a three-phase power subsystem with full redundancy.
Which action is necessary to make this configuration work and be supported?
A.Install 4 additional power supplies.
B.Move the power supplies to bays 1 and 4.
C.Turn off the Dynamic Power Saver feature.
D.Enable three-phase power using the Onboard Administrator.
ANSWER: A

HP参考書   HP0-S17練習問題   HP0-S17   HP0-S17認定証

NO.26 A customer that usually works with a c3000 Enclosure needs to use the external DVD drive on a
c7000 Enclosure and connect the drive to all servers in the c7000 Enclosure.
How can the external DVD drive on the c7000 Enclosure be accessed?
A.Use the DVD drive integrated in the c7000 Enclosure.
B.Use the DVD drive connected to the downlink port of the c7000 Enclosure.
C.Use the DVD drive connected to the USB port on an Onboard Administrator module.
D.Use the DVD drive attached through the serial/USB/video cable attached to any server blade.
ANSWER: C

HP認証試験   HP0-S17   HP0-S17

NO.27 A BladeSystem enclosure is managed by one Onboard Administrator that failed. Which functionality is
still available? (Select two.)
A.iLO 2 is accessible.
B.All fans are up and running.
C.Server blades can access the SAN.
D.New server blades can be added and powered up.
E.New interconnect devices can be added and powered up.
ANSWER: BC

HP認定資格   HP0-S17   HP0-S17問題集   HP0-S17問題集   HP0-S17参考書

NO.28 After replacing a failed drive in a server blade, your customer complains about long logical drive time
recovery. What can you do to reduce recovery time?
A.Migrate the logical drive to RAID 6.
B.Install MPIO software on the server blade.
C.Set the rebuild priority to high on the controller.
D.Enable the Tagged Command Queuing (TCQ) feature on the hard drive.
ANSWER: C

HP   HP0-S17認定資格   HP0-S17   HP0-S17

NO.29 Your customer is looking for an Ethernet interconnect with Fibre uplinks for their c7000 Enclosure.
Which interconnects should be considered? (Select two.)
A.GbE2c Switch
B.Infiniband switch
C.Cisco Catalyst 3020
D.GbE2c Layer 2/3 Switch
E.Ethernet Pass-Thru Module
ANSWER: CD

HP練習問題   HP0-S17認定証   HP0-S17過去問   HP0-S17練習問題   HP0-S17認定試験

NO.30 Which industry standard technologies are compatible with the SB600c AiO Storage Blade? (Select
two.)
A.ATA
B.SAS
C.SCSI
D.iSCSI
E.SATA
ANSWER: BD

HP問題集   HP0-S17過去問   HP0-S17練習問題   HP0-S17   HP0-S17

Pass4Testは最新の00M-620試験問題集と高品質のC4120-783認定試験の問題と回答を提供します。Pass4TestのHP0-J62 VCEテストエンジンと1z0-599試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_THR12_66トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.pass4test.jp/HP0-S17.html

没有评论:

发表评论