IBMの000-315認定試験は全てのIT職員にとって大変重要な試験です。この試験に受かったら、あなたは絶対職場に廃れられることはありません。しかも、昇進と高給も実現できます。IBMの000-315試験に受かったら成功への鍵を握ったと言った人もいます。これは間違いないです。Pass4TestのIBMの000-315試験トレーニング資料はあなたが成功へのショートカットです。このトレーニング資料を持っていたら、成功への道を見つけます。
最もリラックスした状態ですべての苦難に直面しています。IBMの000-315試験はとても難しいですが、受験生の皆がリラックスした状態で試験を受けるべきです。。Pass4TestのIBMの000-315試験トレーニング資料は私達を助けられます。Pass4Testがそばにいてくれると、恐くなくなり、迷わなくなります。Pass4TestのIBMの000-315試験トレーニング資料は私達受験生の最良の選択です。
弊社のIBMの000-315勉強資料を利用したら、きっと試験を受けるための時間とお金を節約できます。Pass4TestのIBMの000-315問題集を買う前に、一部の問題と解答を無料にダウンロードすることができます。PDFのバージョンとソフトウェアのバージョンがありますから、ソフトウェアのバージョンを必要としたら、弊社のカスタマーサービススタッフから取得してください。
Pass4Testを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。Pass4TestはIBM 000-315認証試験を助けって通じての最良の選択で、１００％のIBM 000-315認証試験合格率のはPass4Test最高の保証でございます。君が選んだのはPass4Test、成功を選択したのに等しいです。
Pass4Testが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
試験番号：000-315問題集
試験科目：IBM 「IBM WebSphere Message Broker v6.1, Solution Development」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2013-12-09
問題と解答：全106問
Pass4Testが提供した教育資料は真実のテストに非常に近くて、あなたが弊社の短期の特殊訓練問題を通じてすぐにIT専門の知識を身につけられます。弊社は君の試験の１００％合格率を保証いたします。
IT業の多くの人がいくつか認証試験にパスしたくて、それなりの合格証明書が君に最大な上昇空間を与えます。この競争の激しい業界でとんとん拍子に出世させるのはIBMの000-315認定試験ですが、簡単にパスではありません。でもたくさんの方法があって、最も少ない時間をエネルギーをかかるのは最高です。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/000-315.html
NO.1 The message flow shown in the Exhibit has been deployed to broker ROUTE_BRKR.
The broker's queue manager does not have a Dead Letter Queue nor a Backout Requeue Queue defined.
Error messages are being written to the local error log reporting there has been a problem with writing
failing persistent messages to queue CATCH.Q used by the CATCH Q node. The
MQMD.BACKOUTCOUNT equals 11 and the Backout threshold equals 5.
In which location should the developer find the failing message?
A.SYSTEM.DEAD.LETTER.QUEUE
B.The queue defined by the FAIL Q node
C.The queue defined by the INPUT Q node
D.In no location, the message is discarded
Answer: C
IBM認定証 000-315過去問 000-315 000-315
NO.2 A Message Broker V6.1 developer receives a request to authenticate and authorize Web service
requests to a message flow with username and password provided as WS-Security username tokens
against a Microsoft Active Directory. Which action must be performed by the developer to fulfill this
request?
A.Set the Use HTTPS property of the SOAPInput node.
B.Add a username token in the WS-Security table of the SOAPInput node.
C.Add a username and a password as user-defined SOAP headers of the SOAPInput node.
D.Nothing, the Message Broker administrator that deploys the message associates the right security
profile.
Answer: D
IBM認定資格 000-315認証試験 000-315
NO.3 A message flow developer is familiar with using XPath. The developer must implement a flow that
transforms a message from a COBOL copybook format into a SOAP message. Which two nodes should
the developer use to perform the transformation using XPath?
A.Mapping
B.Extract
C.JavaCompute
D.MQJMSTransform
E.JMSMQTransform
Answer: A C
IBM認定試験 000-315認定試験 000-315認定試験 000-315認定証
NO.4 A Message Broker V6.1 developer needs to work with a multipart message that exploits the MIME
standard. Which two mechanisms can be used to parse the content of the MIME parts?
A.Extract node
B.Validate node
C.ASBITSTREAM function
D.ResetContentDescriptor node
E.ESQL to parse the individual parts
Answer: D E
IBM 000-315 000-315認証試験 000-315 000-315認証試験
NO.5 To meet business requirements, a message flow was developed to route activities based upon the
account identifier which contains the value 'Wealth Management'. The flow was developed using a Route
node. Given the filter expressions that have been configured in this node, multiple expressions may be
matched for any particular message. Which configurable property of the Route node would control
whether only one or all matching expressions are satisfied?
AFilters
B.Operator
C.Distribution mode
D.Match dynamic terminal
Answer: C
IBM 000-315練習問題 000-315過去問 000-315
NO.6 A developer who is very familiar with writing XPath expressions in the mapping editor has been asked
to convert several of the company's current message flows. The message flows use mappings to do
message transformation to message flows which use Java to do transformations. Which method call
should be used to help the developer more quickly write code to access messages?
A.callXPath
B.processXPath
C.mappingXPath
D.evaluateXPath
Answer: D
IBM 000-315練習問題 000-315
NO.7 A Message Broker V6.1 developer builds a message flow to act as a server for an MQ based
Request/Reply pattern that ends with an MQReply node. If a message is received that does not specify a
ReplyToQueue in the MQMD, what will the MQReply node do?
A.Throw an exception.
B.Put the message on the source queue.
C.Put the message on the backout queue.
D.Put the message on the dead letter queue.
Answer: A
IBM 000-315 000-315 000-315 000-315 000-315
NO.8 A Message Broker V6.1 developer wants to create a message flow that will act as a Web service. What
does the developer need to utilize to assure the message elements are uniquely identifiable by the
message flow parser?
A.WSDL
B.Namespace
C.HTTP Header
D.SOAP Envelope
Answer: B
IBM 000-315認定証 000-315
NO.9 A Message Broker V6.1 developer is implementing a message flow with an JMSInput node,
JavaCompute node and a JMSReply node. The logic in the JavaCompute node inserts a record to a
database table using a JDBC Type 4 connection. Which three tasks have to be performed to ensure that
the JMS, the database and the JMS transactions are synchronized?
A.Create the JDBC connection using an XADataSource.
B.Set the Transaction mode of the JMSInput and JMSReply nodes to Local.
C.Set the Transaction mode of the JMSInput and JMSReply nodes to Global.
D.Set the Backout destination of the JMSInput node to hold In-doubt transactions.
E.Use the broker Java API getJDBCType4Connection to initiate the JDBC connection.
F.Configure a XAResourceManager for both the JDBC and JMS connections in the broker's queue
manager.
Answer: C E F
IBM 000-315認定資格 000-315練習問題 000-315認証試験
NO.10 A Message Broker V6.1 developer has been asked to develop a message flow to route
SOAP/HTTP-based Web service requests to the appropriate provider without access to the WSDL of the
providers. Which set of built-in nodes is the most appropriate for implementing this message flow?
A.An HTTPInput node, a Route node, an HTTPRequest node and an HTTPReply node.
B.A SOAPInput node, an EndpointLookup node, a SOAPRequest node and a SOAPReply node.
C.A SOAPInput node, a DatabaseRetrieve node, a SOAPRequest node and a SOAPReply node.
D.An HTTPInput node, a DatabaseRetrieve node, an HTTPRequest node and an HTTPReply node.
Answer: D
IBM 000-315認定証 000-315
NO.11 A flow is being developed to interact with an EIS system using one of the native adapter nodes. As part
of the development process, which artifacts should be dragged onto the flow editor canvas to create the
flow template?
A.WSDL
B.Business Object
C.Message Definition
D.Adapter Connection
Answer: D
IBM認定証 000-315問題集 000-315認定資格
NO.12 A message flow has been developed to receive a record with an MQInput node and store it by
appending it to a local file using the FileOutput node. When the message flow is tested by sending five
test messages, only the record from the last message gets stored in the local file. What is the most
probable cause of this behavior?
A.The file already exists in the mqsitransit directory.
B.The FileOutput node does not support appending data to an existing file.
C.The developer did not connect the Finish File terminal of the FileOutput node.
D.The Record definition property of the FileOutput node is set to "Record is Whole File".
Answer: D
IBM過去問 000-315 000-315 000-315 000-315認定試験
NO.13 A Message Broker V6.1 message flow must invoke one out of five different Web services depending
on the content of the input message. Which implementation is the most appropriate to determine the
service provider?
A.Use a Filter node.
B.Establish a filter pattern in a Route node.
C.Dynamically route by using a RouteToLabel node.
D.Include a Compute node to filter based upon ESQL code.
Answer: B
IBM 000-315参考書 000-315 000-315 000-315問題集
NO.14 When designing an online auction store, one of the key architectural decisions made was to handle and
secure Web traffic using Message Broker V6.1. Two important aspects of security need to be addressed
in the solution: authentication and message integrity. Which transport node is the most appropriate for
implementing this scenario?
A.MQ
B.TCP
C.SOAP
D.HTTP
Answer: C
IBM認定資格 000-315 000-315
NO.15 Which component is the contract that describes to the Message Broker V6.1 developer how to build a
Web service request?
A.WSDL
B.Namespace
C.HTTP Header
D.SOAP Envelope
Answer: A
IBM 000-315 000-315練習問題
NO.16 A message flow has been developed with a HTTPInput node (with XMLNSC as Message domain), a
Compute node (with the ESQL-snippet below) and a HTTPReply node. The message shown in the
Exhibit has been posted to the message flow.
DECLARE myRef REFERENCE TO InputRoot.XMLNSC.RoutingMsg.Body.Items[3];
MOVE myRef NEXTSIBLING;
SET OutputRoot.XMLNSC.Test.Name = myRef.Name;
What is the payload returned to the HTTP client?
A.<Test/>
B.<Test Name="Galvanized Washers"/>
C.<Test Name="Galvanized Lock Washers"/>
D.<Test><Name>Galvanized Lock Washers</Name></Test>
Answer: A
IBM 000-315 000-315認定証
NO.17 A Message Broker V6.1 developer has been asked to develop a message flow that picks up a file every
minute from ftp server ftp.acme.com with ftpuser as the username and Pa$$w0rd as the password. The
developer has added a FileInput node to the message flow. Which three other tasks need to be
performed?
A.Set Polling interval of FileInput node to: 60.
B.Set ftp.acme.com as FTP server on FileInput node.
C.Set ftpuser as Security identity on FileInput node.
D.Set ftpuser/Pa$$w0rd as Security identity on FileInput node.
E.Issue the "mqsisetdbparms MY_BROKER -n ftp::ftpuser -u ftpuser -p Pa$$w0rd" runtime command.
F.Issue the "mqsicreateconfigurableservice MY_BROKER -c TCPIPServer -o 1452" runtime command.
Answer: B C E
IBM練習問題 000-315 000-315 000-315過去問 000-315認定証 000-315
NO.18 Which node is used to retrieve the WSDL port from WebSphere Service Registry and Repository that
could be used by a message flow to dynamically set the output destination?
A.SOAPRequest
B.HTTPRequest
C.RegistryLookup
D.EndpointLookup
Answer: D
IBM問題集 000-315認定試験 000-315 000-315 000-315 000-315
NO.19 There is a requirement to integrate Message Broker V6.1 with a messaging system that conforms to
Java Message Service Specification V1.1. Which messaging transport should be used for integration
purposes?
A.MQ Mobile
B.Broker JMS
C.We Services
D.MQ Enterprise
Answer: B
IBM 000-315問題集 000-315参考書
NO.20 A Message Broker V6.1 developer needs to put an HTTP input message onto an MQ queue for
downstream processing. After clearing the HTTP headers, what is the simplest way to build an MQMD?
A.Write ESQL code to construct an MQMD.
B.Let the MQOutput node build a default MQMD.
C.Use the SOAPExtract node to build an MQMD.
D.Use the ResetContentDescriptor node to build an MQMD.
Answer: B
IBM 000-315 000-315過去問 000-315 000-315 000-315
Pass4Testは最新のCTAL-TM_Syll2012試験問題集と高品質の000-657認定試験の問題と回答を提供します。Pass4TestのE20-554 VCEテストエンジンと000-N37試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP2-N35トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论