2013年11月5日星期二

EMC E20-080認定試験の内容を見せる

最近、EMCの認定試験はますます人気があるようになっています。それと同時に、EMCの認証資格ももっと重要になっています。IT業界では広く認可されている試験として、E20-080認定試験はEMCの中の最も重要な試験の一つです。この試験の認証資格を取ったら、あなたは多くの利益を得ることができます。あなたもこの試験を受ける予定があれば、Pass4TestのE20-080問題集は試験に準備するときに欠くことができないツールです。この問題集はE20-080認定試験に関連する最も優秀な参考書ですから。

現在の社会で人材があちこちいます。IT領域でも同じです。コンピュータの普及につれて、パソコンを使えない人がほとんどいなくなります。ですから、IT業界で勤めているあなたはプレッシャーを感じていませんか。学歴はどんなに高くてもあなたの実力を代表できません。学歴はただ踏み台だけで、あなたの地位を確保できる礎は実力です。IT職員としているあなたがどうやって自分自身の実力を養うのですか。IT認定試験を受験するのは一つの良い方法です。E20-080試験を通して、あなたは新しいスキルをマスターすることができるだけでなく、E20-080認証資格を取得して自分の高い能力を証明することもできます。最近、EMC E20-080試験の認証資格がとても人気があるようになりましたが、受験したいですか。

試験番号:E20-080問題集
試験科目:EMC 「Network Storage - SAN Implementation」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2013-11-05
問題と解答:全210問

EMCのE20-080認定試験はIT業界の中でとても普遍的な試験になります。試験の準備は時間とエネルギーがかかります。時は金なり社会に時間を無駄しないようによいツルを探し出されるのはみんなの希望です。Pass4TestのEMCのE20-080認証試験の問題集は君の20時間だけかかりますよ。

今の競争の激しいのIT業界の中にEMC E20-080認定試験に合格して、自分の社会地位を高めることができます。弊社のIT業で経験豊富な専門家たちが正確で、合理的なEMC E20-080認証問題集を作り上げました。 弊社の勉強の商品を選んで、多くの時間とエネルギーを節約こともできます。

Pass4Test はプロなウェブサイトで、受験生の皆さんに質の高いサービスを提供します。プリセールス.サービスとアフターサービスに含まれているのです。Pass4TestのEMCのE20-080試験トレーニング資料を必要としたら、まず我々の無料な試用版の問題と解答を使ってみることができます。そうしたら、この資料があなたに適用するかどうかを確かめてから購入することができます。Pass4TestのEMCのE20-080試験トレーニング資料を利用してから失敗になりましたら、当社は全額で返金します。それに、一年間の無料更新サービスを提供することができます。

Pass4Testはあなたが完全に信頼できるウェブサイトです。受験生の皆さんをもっと効率的な参考資料を勉強させるように、Pass4TestのIT技術者はずっとさまざまなIT認定試験の研究に取り組んでいますから、もっと多くの素晴らしい資料を開発し出します。一度Pass4TestのE20-080問題集を使用すると、きっと二度目を使用したいです。Pass4Testは最高のE20-080資料を提供するだけでなく、高品質のサービスも提供します。私達の資料についてどんなアドバイスがあってもお気軽に言ってください。受験生の皆さんを試験に合格させることを旨とするだけでなく、皆さんに最高のサービスを提供することも目標としています。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/E20-080.html

NO.1 Which two of the following are iSCSI naming conventions? (Choose two.)
A. EUI
B. iQN
C. iSNS
D. DNS
Answer: A,B

EMC   E20-080   E20-080   E20-080認定資格

NO.2 Which of the following products can be used to create Logical Volumes on a Symmetrix
system?
A. ControlCenter Symmetrix Manager
B. VisualSRM
C. ControlCenter Automated Resource Manager
D. ControlCenter StorageScope
Answer: A

EMC   E20-080   E20-080過去問

NO.3 Which of the following is not a CLARiiON High Availability feature?
A. Dual consoles
B. Dual power supplies
C. Dual ported drives
D. Dual storage processors
E. Dual LCCs
Answer: A

EMC   E20-080   E20-080   E20-080   E20-080参考書

NO.4 Which of the following statements best describes a Fan-out Ratio for a SAN attached
array?
A. The qualified maximum number of initiators that can access a single Target port
through a SAN
B. The qualified maximum number of storage ports that can be attached to an initiator
port in a SAN
C. The qualified maximum number of storage ports that can be direct attached to a HBA
port in a SAN
D. The maximum number of HBA and storage ports that can be contained in a zone on a
switch
Answer: A

EMC認定試験   E20-080   E20-080認定試験   E20-080   E20-080過去問

NO.5 Which of the following statements best describes ControlCenter Autofixes?
A. Commands that can be run to fix a problem notification from an alert
B. Rules containing all of the general criteria for storage allocation requests
C. Groups of storage devices that SPS will search for available storage
D. A collection of Symmetrix devices used to query status and impart control operations
Answer: A

EMC問題集   E20-080参考書   E20-080   E20-080過去問   E20-080

NO.6 Which two of the following are Celerra Replicator features?
A. Point-in-time copy over an IP network
B. Only sends Control Station configuration parameters over the IP network
C. Synchronous data recovery
D. Only sends changed data over the IP network
Answer: A,D

EMC認定証   E20-080   E20-080

NO.7 In the first step of the copy on first write mechanism used with Reserved LUN Pool, the
host sends a write request to the Source LUN. What is the next step?
A. The snapshot pointer is changed to chunk in Reserved LUN Pool
B. The original Source LUN data chunk is written to Reserved LUN Pool
C. The snapshot pointer writes to Reserved LUN Pool
D. The host data is written to Source LUN
Answer: B

EMC   E20-080   E20-080   E20-080

NO.8 Which of the following statements is true?
A. ControlCenter agent activity is policy-based and user-defined
B. ControlCenter agents can only be installed on the Repository server
C. All ControlCenter agents communicate with each other
D. ControlCenter agents tier handles data presentation
Answer: A

EMC認証試験   E20-080   E20-080   E20-080参考書

NO.9 Which two of the following are features of TimeFinder/Mirror Clone? (Choose two.)
A. Utilizes VDEVs
B. Copy on access to allow for instant access to data
C. Point in time copy of Standard or BCV device
D. Requires only a small fraction of Source volume capacity
Answer: B,C

EMC認定試験   E20-080   E20-080   E20-080練習問題   E20-080

NO.10 Which of the following components are required in order to enable write caching in a
CLARiiON array?
A. 2 power supplies, 2 storage processors, 4 DAE shelves and at least one standby power
supply
B. 2 power supplies, 2 storage processors, 2 LCC cards and at least one standby power
supply
C. 2 power supplies, 4 storage processors, 2 LCC cards and at least one standby power
supply
D. 2 power supplies, 2 storage processors, 2 DAE shelves and at least one standby power
supply
Answer: B

EMC問題集   E20-080認定証   E20-080   E20-080過去問

NO.11 Which of the following is monitored by the ControlCenter SAN agent?
A. Brocade switch
B. Windows 2000 disk
C. Legato Networker
D. CLARiiON
Answer: A

EMC認証試験   E20-080認証試験   E20-080問題集

NO.12 Which of the following statements represents a feature of file level host storage access?
A. The host sees Logical Volumes as Physical Volumes
B. Data is accessed using NFS, CIFS, and FTP
C. The host typically has exclusive access to Logical Volumes
D. The storage system presents LUNs to hosts
Answer: B

EMC   E20-080   E20-080   E20-080   E20-080

NO.13 Which of the following Celerra replication options offers synchronous replication over
campus distances for disaster recovery?
A. TimeFinder/FS SRDF/NearCopy
B. TimeFinder/FS SnapSure
C. TimeFinder/FS Snapcopy
D. TimeFinder/FS SRDF/FarCopy
Answer: A

EMC認証試験   E20-080   E20-080過去問

NO.14 What is the purpose of storage groups in a CLARiiON storage array?
A. LUN expansion
B. LUN mirroring
C. LUN groups
D. LUN masking
Answer: D

EMC   E20-080認定試験   E20-080   E20-080参考書

NO.15 Which of the following statements represents a feature of SnapView Clones?
A. Data can be made available to second host immediately; no synchronization required
B. Copy uses a fraction of Source LUN size
C. Copy requires same space as Source LUN
D. Data copy may be used as Source for backup application running on first host
Answer: C

EMC認定試験   E20-080参考書   E20-080

NO.16 Which two of the following statements are features of CLARiiON Access Logix?
(Choose two.)
A. LUN masking requires the use of storage groups
B. The storage processors in the array do not share Access Logix databases
C. Hosts need to be connected to the storage group to perform LUN masking
D. Storage groups cannot be destroyed once created
Answer: A,C

EMC   E20-080   E20-080参考書   E20-080過去問   E20-080認証試験

NO.17 Which of the following protocols do open systems hosts use to access storage in Fibre
Channel SANs?
A. SCSI
B. ESCON
C. SNMP
D. FICON
Answer: A

EMC   E20-080   E20-080   E20-080参考書   E20-080認定試験

NO.18 Which of the following statements is true regarding active zone sets in ControlCenter?
A. Associate an active zone set with multiple fabrics or VSANs at once.
B. Place a copy of an active zone set in the Planned Zone Sets folder for
activation/modification.
C. Directly modify an active zone set.
D. Directly delete an active zone set.
Answer: B

EMC   E20-080   E20-080   E20-080認定資格

NO.19 Which of the following Windows-based applications in ControlCenter displays
Symmetrix performance for analysis?
A. Symmetrix Manager
B. StorageScope
C. TimeFinder/SRDF QoS
D. Performance Manager
Answer: D

EMC   E20-080   E20-080認証試験

NO.20 Which of the following web interfaces can be used to manage standalone M-Series
switches?
A. Web interface is not available
B. EWS
C. Web Tools
D. Fabric Manager
Answer: B

EMC認証試験   E20-080   E20-080   E20-080   E20-080

NO.21 What is the purpose of the Performance Manager in ControlCenter?
A. It automatically allocates storage device to hosts
B. It splits and establishes with standard and Business Continuance Volume (BCV)
devices
C. It reports key historical performance data
D. It converts device types between standard and BCV
Answer: C

EMC認証試験   E20-080認定証   E20-080認定試験   E20-080

NO.22 Which of the following is monitored by the ControlCenter storage agent?
A. Brocade switch
B. Legato Networker
C. CLARiiON
D. Windows 2000 disk
Answer: C

EMC   E20-080練習問題   E20-080

NO.23 In the first step of a read cache miss operation on a Symmetrix, the host sends a read
request. What is the next step?
A. The Channel Director checks the track table
B. The Channel Director sends data to the host
C. The Disk Director retrieves data
D. The Disk Director sends data to the host
Answer: A

EMC認定試験   E20-080練習問題   E20-080

NO.24 What is the default percentage of cache capacity at which high water mark cache flushing
is initiated in a CLARiiON system?
A. 80%
B. 92%
C. 55%
D. 75%
Answer: A

EMC   E20-080   E20-080   E20-080

NO.25 What is the maximum number of CLARiiON Source systems that can be mirrored to one
Target system?
A. 16
B. 4
C. 2
D. 8
Answer: B

EMC   E20-080   E20-080問題集   E20-080

NO.26 Which two of the following can you use to allocate CLARiiON LUNs to a server?
(Choose two.)
A. Connectrix Manager
B. TimerFinder
C. ESN Manager
D. Navisphere Manager
E. ControlCenter
F. TimeFinder/Snap
Answer: D,E

EMC   E20-080   E20-080   E20-080   E20-080

NO.27 Which of the following statements is true?
A. Concurrent SRDF has the capability of dynamically defining relationships between
SRDF Source (R1) and Target (R2) devices
B. Concurrent SRDF has the ability to use both RAF processors for Fibre Channel host
connections
C. Concurrent SRDF enables SRDF between Symmetrix systems using Fibre Channel
switches
D. With concurrent SRDF, a single SRDF Source device (R1) can be simultaneously
paired with two SRDF Target devices (R2)
Answer: D

EMC   E20-080認証試験   E20-080認証試験   E20-080認定試験

NO.28 XXXX .com has a primary CX600 array and a secondary CX400 array. XXXX .com
wants to do data backup on the secondary site while the applications are still running on
the primary site. How can XXXX .com accomplish this goal?
A. Array types are not compatible
B. Admsnap and PowerPath
C. MirrorView and SnapView
D. MirrorView and Navisphere CLI
Answer: C

EMC   E20-080   E20-080   E20-080

NO.29 Which of the following are configuration options on the NS600 Data Movers? (Choose
two.)
A. One Data Mover is primary, and one acts as a standby
B. All four (4) Data Movers are primary
C. Both Data Movers are primary
D. One Data Mover acts as a standby for the other three (3) Data Movers
Answer: A,C

EMC認証試験   E20-080過去問   E20-080   E20-080   E20-080

NO.30 Which of the following sequences would ensure that an I/O is completed when a HBA on
a host with PowerPath fails when the I/O is being driven through it?
A. PowerPath receives I/O timeout, drives I/O through an alternate path, and takes the
failed path offline
B. PowerPath receives I/O timeout, takes the failed path offline and drives I/O through an
alternate path
C. PowerPath takes the failed path offline, drives I/O through an alternate path, and
receives I/O timeout
D. PowerPath takes the failed path offline, receives I/O timeout and drives I/O through an
alternate path
Answer: B

EMC認定証   E20-080問題集   E20-080

Pass4Testは最新のC_TFIN52_64試験問題集と高品質のHP2-Z26認定試験の問題と回答を提供します。Pass4TestのCUR-009 VCEテストエンジンと000-783試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC-TSCM62-64トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.pass4test.jp/E20-080.html

没有评论:

发表评论