2014年4月10日星期四

IBM 000-562認定試験の準備を十分に完了したのか

IT業の多くの人がいくつか認証試験にパスしたくて、それなりの合格証明書が君に最大な上昇空間を与えます。この競争の激しい業界でとんとん拍子に出世させるのはIBMの000-562認定試験ですが、簡単にパスではありません。でもたくさんの方法があって、最も少ない時間をエネルギーをかかるのは最高です。

あなたはいまIBMの000-562認定試験にどうやって合格できるかということで首を傾けているのですか。IBMの000-562認定試験は現在のいろいろなIT認定試験における最も価値のある資格の一つです。ここ数十年間では、インターネット・テクノロジーは世界中の人々の注目を集めているのです。それがもう現代生活の不可欠な一部となりました。その中で、IBMの認証資格は広範な国際的な認可を得ました。ですから、IT業界で仕事している皆さんはIBMの認定試験を受験して資格を取得することを通して、彼らの知識やスキルを向上させます。000-562認定試験はIBMの最も重要な試験の一つです。この資格は皆さんに大きな利益をもたらすことができます。

Pass4TestのIBMの000-562試験トレーニング資料は全てのオンラインのトレーニング資料で一番よいものです。我々の知名度はとても高いです。これは受験生の皆さんが資料を利用した後の結果です。Pass4TestのIBMの000-562試験トレーニング資料を選んだら、100パーセントの成功率を保証します。もし失敗だったら、我々は全額で返金します。受験生の皆さんの重要な利益が保障できるようにPass4Testは絶対信頼できるものです。

いつもあなたに最高の000-562認定試験に関連する試験参考書を与えられるために、Pass4Testは常に問題集の質を改善し、ずっと最新の試験のシラバスに応じて問題集を更新しています。現在の市場では、Pass4Testはあなたの最もよい選択です。長い間にわたって、Pass4Testは多くの受験生に認可されました。私を信じていないなら、周りの人々に聞いてみてもいいです。Pass4Testの試験問題集を利用したことがある人がきっといますから。Pass4Testは最優秀な試験000-562参考書を提供してあなたを試験に合格させることを保証します。

神様は私を実力を持っている人間にして、美しい人形ではないです。IT業種を選んだ私は自分の実力を証明したのです。しかし、神様はずっと私を向上させることを要求します。IBMの000-562試験を受けることは私の人生の挑戦の一つです。でも大丈夫です。Pass4TestのIBMの000-562試験トレーニング資料を購入しましたから。すると、IBMの000-562試験に合格する実力を持つようになりました。 Pass4TestのIBMの000-562試験トレーニング資料を持つことは明るい未来を持つことと同じです。

Pass4Testが提供したIBMの000-562トレーニング資料はシミュレーションの度合いがとても高いでから、実際の試験で資料での同じ問題に会うことができます。これは当社のITエリートの団体はすごい能力を持っていることが説明されました。現在、野心家としてのIT職員がたくさんいて、自分の構成ファイルは市場の需要と互換性があることを確保するために、人気があるIT認証試験を通じて自分の夢を実現します。そのようなものとして、IBMの000-562試験はとても人気がある認定試験です。Pass4Testが提供したIBMの000-562トレーニング資料を手にすると、夢への扉はあなたのために開きます。

試験番号:000-562問題集
試験科目:IBM 「IBM Tivoli Storage Productivity Center V4.2 Implementation」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2014-04-10
問題と解答:全200問

Pass4Testを利用するのは君の合格率を100%保証いたします。Pass4Testは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/000-562.html

NO.1 IBM Tivoli Storage Productivity Center V4.2 (TPC) Server audit logging initiated by the Graphical User
Interface writes to the log file at which location?
A. TPC_installation_directory\IBM\TPC\data\log\AuditTrace.log
B. TPC_installation_directory\IBM\TPC\device\log\AuditTrace.log
C. TPC_installation_directory\IBM\TPC\data\log\auditTPCDataServer.log
D. TPC_installation_directory\IBM\TPC\device\log\auditTPCDeviceServer.log
Answer: A

IBM参考書   000-562練習問題   000-562参考書

NO.2 Profiles enable which two capabilities when used in a scan? (Choose two.)
A. ability to gather statistics
B. ability to control which files are scanned
C. ability to control which hosts are scanned
D. ability to control which fabrics are scanned
E. ability to control which disk storage subsystems are scanned
Answer: A,B

IBM   000-562問題集   000-562   000-562認証試験   000-562

NO.3 Given a malfunctioning IBM Tivoli Storage Productivity Center V4.2 (TPC) installation at a customer
site after a network topology reconfiguration, what is the full path to check the TPC configuration files?
A. c:\Program Files\IBM
B. c:\Program Files\IBM\TPC
C. c:\Program Files\IBM\TPC\config
D. c:\Program Files\IBM\TPC\server\config
Answer: C

IBM問題集   000-562参考書   000-562問題集   000-562過去問

NO.4 The History Aggregator is enabled by default to run every day at 3:00 a.m. Which two historical data
statistics can be used for trend analysis? (Choose two.)
A. disk removal statistics
B. disk capacity statistics
C. file modification statistics
D. file backup time statistics
E. file type space usage statistics
Answer: B,E

IBM認定証   000-562問題集   000-562認定試験   000-562練習問題

NO.5 A client wants to migrate 100 data and fabric agents into Storage Resource Agents (SRA). In addition to
command line and installation wizard, what other method can be used for the migration?
A. Administrative Services > Configuration > SRA Upgrades
B. Administrative Services > Configuration > SRA Deployments
C. Administrative Services > Configuration > Migrate Data/Fabric Agent
D. Administrative Services > Data Sources > Data/SRA > Migrate Data/Fabric Agent
Answer: C

IBM認定証   000-562   000-562参考書   000-562   000-562練習問題   000-562

NO.6 Which command must be run for IBM DB2 before IBM Tivoli Storage Productivity Center V4.2 is
installed in a UNIX environment?
A. ./usr/db2inst1/sqllib/db2profile
B. . /opt/db2inst1/sqllib/db2profile
C. . /home/db2inst1/sqllib/db2profile
D. . /home/sqllib/db2profile/db2inst1
Answer: C

IBM   000-562参考書   000-562参考書

NO.7 What is the full default path for finding log files that give information about the success or failure of the
IBM Tivoli Storage Productivity Center V4.2 (TPC) installation on a 32-bit Windows server.?
A. C:\Program Files\TPC\log
B. C:\Program Files\IBM\data\log
C. C:\Program Files\IBM\TPC\log
D. C:\Program Files\IBM\device\log
Answer: C

IBM   000-562練習問題   000-562認証試験   000-562過去問

NO.8 Which two areas can configure history retention in order to perform historical analysis and reporting?
(Choose two.)
A. Scan
B. Probe
C. Computers
D. Filesystems
E. Performance Monitors
Answer: D,E

IBM   000-562問題集   000-562問題集   000-562過去問

NO.9 In provisioning a new storage subsystem, an administrator inadvertently violated a zoning-related
policy. If the zoning-related configuration changes persist in the database, which IBM Tivoli Storage
Productivity Center V4.2 analytics function can be used to detect this policy violation?
A. Storage Optimizer
B. Analytics Validation
C. SAN Policy Manager
D. Configuration Analysis
Answer: D

IBM   000-562   000-562   000-562練習問題

NO.10 When including profiles in a scan the desired profiles can be highlighted in the Available Profiles list box
and applied to which two selectable sections? (Choose two.)
A. Files
B. Hosts
C. Directories
D. Filesystems
E. Operating System Types
Answer: C,D

IBM   000-562   000-562   000-562認定証   000-562

NO.11 A customer uses the Configure Wizard device to configure new or existing resources so that data is
collected on the configured group. Which resource can be configured with the wizard?
A. In-band Fabric Agent
B. SAN Volume Controller
C. Storage Resource Agent
D. VMWare VI Data Source
Answer: B

IBM   000-562   000-562   000-562

NO.12 When attempting to log in to the IBM Tivoli Storage Productivity Center V4.2 (TPC) Graphical User
Interface (GUI) the user gets an access denied message. What is causing this error?
A. The TPC GUI service is down.
B. The user does not have a valid operating system login ID.
C. The user does not have Administrative Authority on the server.
D. The user has not been added to a mapped role or group within TPC.
Answer: D

IBM   000-562認証試験   000-562認定証   000-562認証試験

NO.13 A customer has IBM Tivoli Storage Productivity Center V4.1 (TPC) installed on Windows 2003 with 8GB
of RAM running IBM DB2 V9.5 Fixpack 5 with 10 Data Agents and 5 Fabric Agents. The customer wants
to utilize the Configure Device Wizard on the newest TPC V4.2 code. Which solution will retain their
current configuration and minimize additional setup time?
A. fresh install of DB2
B. upgrade to TPC V4.2
C. upgrade to TPC V4.2 and migrate Data and Fabric Agents
D. fresh install of TPC V4.2 and deploy Storage Resource Agents
Answer: C

IBM認証試験   000-562   000-562認定証   000-562   000-562

NO.14 In preparing for migration of all IBM Tivoli Storage Productivity Center (TPC) components to the newest
level, the implementing person installed an IBM Tivoli Storage Manager (TSM) Backup/Archive client on
the TPC Server and configured it to run standard file backups of the local filesystems. What is the best
practice backup method for TPC?
A. online backup using TSM API for Databases to save TPC configuration
B. online backup using the built-in TPC Backup Utility which uses the API to send data to a TSM server
C. offline backup of TPC to TSM without pausing any servers to archive the current state of the TPC
Server
D. offline backup of TPC to TSM with stopping the data, the device servers, and the DB2 database prior to
copying the files
Answer: D

IBM   000-562認定試験   000-562   000-562認定試験   000-562認定試験

NO.15 A customer wants to manage devices in the same manner (storage, fabric, server, or tapes). Which
panel would be displayed in the Configure Device Wizard?
A. Select CIMOM
B. Select Devices
C. Select Device Preference
D. Select Storage Subsystem
Answer: B

IBM   000-562   000-562   000-562認証試験   000-562

NO.16 Where can a list of all the devices discovered by IBM Tivoli Storage Productivity Center V4.2 be
viewed?
A. Reporting > System Reporting
B. System Reports > Disk > SAN Assets (All)
C. System Reports > Fabric > SAN Assets (All)
D. Data Manager > Reporting > Asset Reporting
Answer: C

IBM問題集   000-562練習問題   000-562認定試験   000-562   000-562問題集

NO.17 What must be done before IBM Tivoli Storage Productivity Center V4.2 (TPC) manages network
attached storage (NAS)?
A. enable SNMP on the NAS filer
B. enable the Storage Resource Agent on the NAS filer
C. mount a file system of the NAS filer to the agent server
D. configure the CIMOM server to be on a trusted domain of the NAS filer
Answer: A

IBM   000-562   000-562

NO.18 Which task must be completed to fine tune and control which files are scanned during a filesystem scan
and specify exactly which statistical information is gathered?
A. create a custom scan
B. create a custom probe
C. create a custom profile
D. create a custom Storage Resource Agent Group
Answer: C

IBM問題集   000-562参考書   000-562認定資格   000-562   000-562練習問題

NO.19 How can the storage subsystem's performance be viewed?
A. Data Manager > Reporting > Storage Subsystem Performance
B. Disk Manager > Reporting > Storage Subsystems > Volume to HBA Assignment
C. Topology > Storage, click Topology Settings and add Performance on the Active Overlay settings
D. Topology > Fabrics, click Topology Settings and add Expand All Sections on the Active Overlay
settings
Answer: C

IBM   000-562練習問題   000-562   000-562認定資格   000-562参考書

NO.20 IBM Tivoli Storage Productivity Center V4.2 (TPC) is managing DS8000, DS6000, DS5000, DS4000,
DS3000, Element Management Clients, NetApp, Hitachi Data Systems, XIV storage subsystems, and
SAN Volume Controllers. A discovery job is scheduled to run every 6 hours and a probe job is scheduled
to run every 12 hours. Recently the probe job is the only one that has errors. What could be the problem?
A. The probe job failed on CIMOM devices.
B. The probe job is taking more than 12 hours.
C. The discovery job taking more than 6 hours.
D. The probe job is schedule to run indefinitely.
Answer: B

IBM   000-562問題集   000-562認定試験   000-562参考書

Pass4Testは最新の000-N45試験問題集と高品質のC_TPLM30_65認定試験の問題と回答を提供します。Pass4TestのE20-385 VCEテストエンジンとCV0-001試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP2-T23トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.pass4test.jp/000-562.html

没有评论:

发表评论