人はそれぞれの夢を持っています。あなたの夢は何でしょうか。昇進ですか。あるいは高給ですか。私の夢はMicrosoftの070-561認定試験に受かることです。この認証の証明書を持っていたら、全ての難問は解決できるようになりました。この試験に受かるのは難しいですが、大丈夫です。私はPass4TestのMicrosoftの070-561試験トレーニング資料を選びましたから。私が自分の夢を実現することを助けられますから。あなたもITに関する夢を持っていたら、速くPass4TestのMicrosoftの070-561試験トレーニング資料を選んでその夢を実現しましょう。Pass4Testは絶対信頼できるサイトです。
多くの人々は高い難度のIT認証試験に合格するのは専門の知識が必要だと思います。それは確かにそうですが、その知識を身につけることは難しくないとといわれています。IT業界ではさらに強くなるために強い専門知識が必要です。
あなたはPass4Testが提供したMicrosoftの070-561認定試験の問題集だけ利用して合格することが問題になりません。ほかの人を超えて業界の中で最大の昇進の機会を得ます。もしあなたはPass4Testの商品がショッピング車に入れて24のインターネットオンライン顧客サービスを提供いたします。問題があったら気軽にお問いください、
Pass4Testは多くの認証業界の評判を持っています。それは我々はMicrosoftの070-561問題集や070-561スタディガイドや070-561問題と解答がたくさんありますから。現在のサイトで最もプロなITテストベンダーとして我々は完璧なアフターサービスを提供します。全てのお客様に追跡サービスを差し上げますから、あなたが買ったあとの一年間で、弊社は全てのお客様に問題集のアップグレードを無料に提供します。その間で認定テストセンターのMicrosoftの070-561試験問題は修正とか表示されたら、無料にお客様に保護して差し上げます。Microsoftの070-561試験問題集はPass4TestのIT領域の専門家が心を込めて研究したものですから、Pass4TestのMicrosoftの070-561試験資料を手に入れると、あなたが美しい明日を迎えることと信じています。
試験番号：070-561問題集
試験科目：Microsoft 「TS: MS .NET Framework 3.5, ADO.NET Application Development」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2013-09-06
問題と解答：全170問
人生のチャンスを掴むことができる人は殆ど成功している人です。ですから、ぜひPass4Testというチャンスを掴んでください。Pass4TestのMicrosoftの070-561試験トレーニング資料はあなたがMicrosoftの070-561認定試験に合格することを助けます。この認証を持っていたら、あなたは自分の夢を実現できます。そうすると人生には意義があります。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/070-561.html
NO.1 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You need to separate the security-related exceptions from the other exceptions for database operations at
run time.
Which code segment should you use?
A. Catch ex As System.Security.SecurityException
'Handle all database security related exceptions.
End Try
B. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).[Class].ToString() = "14" Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
C. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).Number = 14 Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
D. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).Message.Contains("Security") Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
Answer: B
Microsoft 070-561過去問 070-561 070-561問題集
NO.2 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(sourceConnectionString)
02 Using connection2 As _
New SqlConnection(destinationConnectionString)
03 Using command As New SqlCommand()
04 connection.Open()
05 connection2.Open()
06 Using reader As SqlDataReader = command.ExecuteReader()
07 Using bulkCopy As New SqlBulkCopy(connection2)
08
09 End Using
10 End Using
11 End Using
12 End Using
13 End Using
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 08?
A. reader.Read()
bulkCopy.WriteToServer(reader)
B. bulkCopy.DestinationTableName = "Transactions"
bulkCopy.WriteToServer(reader)
C. bulkCopy.DestinationTableName = "Transactions"
AddHandler bulkCopy.SqlRowsCopied, _
AddressOf bulkCopy_SqlRowsCopied
D. While reader.Read()
bulkCopy.WriteToServer(reader)
End While
Answer: B
Microsoft練習問題 070-561 070-561認定証 070-561 070-561
NO.3 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
string queryString = "Select Name, Age from dbo.Table_1";
SqlCommand command = new SqlCommand(queryString, (SqlConnection)connection));
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. var value = command.ExecuteScalar();
string requiredValue = value.ToString();
B. var value = command.ExecuteNonQuery();
string requiredValue = value.ToString();
C. var value = command.ExecuteReader(CommandBehavior.SingleRow);
string requiredValue = value[0].ToString();
D. var value = command.ExecuteReader(CommandBehavior.SingleRow);
string requiredValue = value[1].ToString();
Answer: A
Microsoft 070-561練習問題 070-561 070-561参考書 070-561問題集 070-561
NO.4 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim queryString As String = "Select Name, Age from dbo.Table_1"
Dim command As New _SqlCommand(queryString, DirectCast(connection, SqlConnection))
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. Dim value As Object = command.ExecuteScalar()
Dim requiredValue As String = value.ToString()
B. Dim value As Integer = command.ExecuteNonQuery()
Dim requiredValue As String = value.ToString()
C. Dim value As SqlDataReader = _command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(0).ToString()
D. Dim value As SqlDataReader = _command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(1).ToString()
Answer: A
Microsoft過去問 070-561 070-561 070-561 070-561
NO.5 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named OrderDS that has the Order and OrderDetail tables as
shown in the following exhibit.
You write the following code segment. (Line numbers are included for reference only.)
01 private void GetOrders(SqlDataConnection cn) {
02 SqlCommand cmd = cn.CreateCommand();
03 cmd.CommandText = "Select * from [Order];
Select * from [OrderDetail];";
04 SqlDataAdapter da = new SqlDataAdapter(cmd);
05
06 }
You need to ensure that the Order and the OrderDetail tables are populated.
Which code segment should you insert at line 05?
A. da.Fill(OrderDS);
B. da.Fill(OrderDS.Order);
da.Fill(OrderDS.OrderDetail);
C. da.TableMappings.AddRange(new DataTableMapping[] {
new DataTableMapping("Table", "Order"),
new DataTableMapping("Table1", "OrderDetail")});
da.Fill(OrderDS);
D. DataTableMapping mapOrder = new DataTableMapping();
mapOrder.DataSetTable = "Order";
DataTableMapping mapOrderDetail = new DataTableMapping();
mapOrder.DataSetTable = "OrderDetail";
da.TableMappings.AddRange(new DataTableMapping[]
{ mapOrder, mapOrderDetail });
Da.Fill(OrderDS);
Answer: C
Microsoft 070-561 070-561 070-561認定試験 070-561認定試験
NO.6 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(connectionString)
02 Dim cmd As New SqlCommand(queryString, connection)
03 connection.Open()
04
05 While sdrdr.Read()
06 ' use the data in the reader
07 End While
08 End Using
You need to ensure that the memory is used efficiently when retrieving BLOBs from the database.
Which code segment should you insert at line 04?
A. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader()
B. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.[Default])
C. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.SchemaOnly)
D. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.SequentialAccess)
Answer: D
Microsoft問題集 070-561 070-561認定試験
NO.7 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. Try
If conn IsNot Nothing Then
conn.Close()
' code for the query
End If
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Open()
End If
End Try
B. Try
' code for the query
conn.Close()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Open()
End If
End Try
C. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Close()
End If
End Try
D. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Close()
End If
End Try
Answer: C
Microsoft 070-561 070-561認定試験
NO.8 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The connection string of the application is defined in the following manner.
"Server=Prod;Database=WingtipToys;Integrated
Security=SSPI;Asynchronous Processing=true"
The application contains the following code segment. (Line numbers are included for reference only.)
01 Protected Sub UpdateData(ByVal cmd As SqlCommand)
02 cmd.Connection.Open()
03
04 lblResult.Text = "Updating ..."
05 End Sub
The cmd object takes a long time to execute.
You need to ensure that the application continues to execute while cmd is executing.
What should you do?
A. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(New AsyncCallback( _
AddressOf UpdateComplete), cmd)
Add the following code segment.
Private Sub UpdateComplete (ByVal ar As IAsyncResult)
Dim count As Integer = CInt(ar.AsyncState)
LogResults(count)
End Sub
B. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(New AsyncCallback( _
AddressOf UpdateComplete), cmd)
Add the following code segment.
Private Sub UpdateComplete(ByVal ar As IAsyncResult)
Dim cmd As SqlCommand = DirectCast(ar.AsyncState, SqlCommand)
Dim count As Integer = cmd.EndExecuteNonQuery(ar)
LogResults(count)
End Sub
C. Insert the following code segment at line 03.
AddHandler cmd.StatementCompleted, AddressOf UpdateComplete
cmd.ExecuteNonQuery()
Add the following code segment.
Private Sub UpdateComplete(ByVal sender As Object, _
ByVal e As StatementCompletedEventArgs)
Dim count As Integer = e.RecordCount
LogResults(count)
End Sub
D. Insert the following code segment at line 03.
Dim notification As New _
SqlNotificationRequest("UpdateComplete ", "", 10000)
cmd.Notification = notification
cmd.ExecuteNonQuery()
Add the following code segment.
Private Sub UpdateComplete (ByVal notice As SqlNotificationRequest)
Dim count As Integer = Integer.Parse(notice.UserData)
LogResults(count)
End Sub
Answer: B
Microsoft 070-561参考書 070-561 070-561
NO.9 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a SqlDataAdapter object named daOrder. The SelectCommand property of the
daOrder object is set.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub ModifyDataAdapter()
02
03 End Sub
You need to ensure that the daOrder object can also handle updates.
Which code segment should you insert at line 02?
A. Dim cb As New SqlCommandBuilder(daOrder)
cb.RefreshSchema()
B. Dim cb As New SqlCommandBuilder(daOrder)
cb.SetAllValues = True
C. Dim cb As New SqlCommandBuilder(daOrder)
daOrder.DeleteCommand = cb.GetDeleteCommand()
daOrder.InsertCommand = cb.GetInsertCommand()
daOrder.UpdateCommand = cb.GetUpdateCommand()
D. Dim cb As New SqlCommandBuilder(daOrder)
cb.RefreshSchema()
cb.GetDeleteCommand()
cb.GetInsertCommand()
cb.GetUpdateCommand()
Answer: C
Microsoft 070-561過去問 070-561参考書 070-561
NO.10 myConnection.Close();
NO.11 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a TextBox control named txtProductID. The application will return a list of active
products that have the ProductID field equal to the txtProductID.Text property.
You write the following code segment. (Line numbers are included for reference only.)
01 private DataSet GetProducts(SqlConnection cn) {
02 SqlCommand cmd = new SqlCommand();
03 cmd.Connection = cn;
04 SqlDataAdapter da = new SqlDataAdapter(cmd);
05 DataSet ds = new DataSet();
06
07 da.Fill(ds);
08 return ds;
09 }
You need to populate the DataSet object with product records while avoiding possible SQL injection
attacks.
Which code segment should you insert at line 06?
A. cmd.CommandText = string.Format("sp_sqlexec 'SELECT ProductID,
Name FROM Product WHERE ProductID={0} AND IsActive=1'", txtProductID.Text);
B. cmd.CommandText = string.Format("SELECT ProductID, Name FROM
Product WHERE ProductID={0} AND IsActive=1", txtProductID.Text);
cmd.Prepare();
C. cmd.CommandText = string.Format("SELECT ProductID, Name FROM
Product WHERE ProductID={0} AND IsActive=1", txtProductID.Text);
cmd.CommandType = CommandType.TableDirect;
D. cmd.CommandText = "SELECT ProductID, Name FROM Product WHERE
ProductID=@productID AND IsActive=1";
cmd.Parameters.AddWithValue("@productID", txtProductID.Text);
Answer: D
Microsoft 070-561認証試験 070-561練習問題 070-561認定試験 070-561問題集
NO.12 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 DataColumn col = new DataColumn("UnitPrice", typeof(decimal));
02
03 OrderDetailTable.Columns.Add(col);
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity";
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)";
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value,1)";
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)";
Answer: D
Microsoft認定試験 070-561 070-561 070-561 070-561認定試験
NO.13 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OdbcConnection(connectionString);
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OleDbConnection(connectionString);
C. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory("System.Data.Odbc");
DbConnection connection = factory.CreateConnection();
D. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory(databaseProviderName);
DbConnection connection = factory.CreateConnection();
Answer: D
Microsoft 070-561認定試験 070-561問題集 070-561過去問
NO.14 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a TextBox control named txtProductID. The application will return a list of active
products that have the ProductID field equal to the txtProductID.Text property.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Function GetProducts(ByVal cn _
As SqlConnection) As DataSet
02 Dim cmd As New SqlCommand()
03 cmd.Connection = cn
04 Dim da As New SqlDataAdapter(cmd)
05 Dim ds As New DataSet()
06
07 da.Fill(ds)
08 Return ds
09 End Function
You need to populate the DataSet object with product records while avoiding possible SQL injection
attacks.
Which code segment should you insert at line 06?
A. cmd.CommandText = _
String.Format("sp_sqlexec 'SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1'", _
txtProductID.Text)
B. cmd.CommandText = _
String.Format("SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1", _
txtProductID.Text)
cmd.Prepare()
C. cmd.CommandText = _
String.Format("SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1", _
txtProductID.Text)
cmd.CommandType = CommandType.TableDirect
D. cmd.CommandText = "SELECT ProductID, " + _
"Name FROM Product WHERE ProductID=@productID AND IsActive=1"
cmd.Parameters.AddWithValue("@productID", txtProductID.Text)
Answer: D
Microsoft 070-561認証試験 070-561練習問題
NO.15 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim query As String = _ "Select EmpNo, EmpName from dbo.Table_1; " + _ "select Name,Age from
dbo.Table_2"
Dim command As New SqlCommand(query, connection)
Dim reader As SqlDataReader = command.ExecuteReader()
You need to ensure that the application reads all the rows returned by the code segment.
Which code segment should you use?
A. While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
reader.Read()
End While
B. While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
reader.NextResult()
End While
C. While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
reader.NextResult()
while reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
D. While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
reader.Read()
while reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
Answer: C
Microsoft 070-561認定資格 070-561参考書 070-561認証試験
NO.16 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application uses Microsoft SQL Server 2005.
You write the following code segment. (Line numbers are included for reference only.)
01 String myConnString = "User
02 ID=<username>;password=<strong password>;Initial
03 Catalog=pubs;Data Source=myServer";
04 SqlConnection myConnection = new
05 SqlConnection(myConnString);
06 SqlCommand myCommand = new SqlCommand();
07 DbDataReader myReader;
08 myCommand.CommandType =
09 CommandType.Text;
10 myCommand.Connection = myConnection;
11 myCommand.CommandText = "Select * from Table1;
Select * from Table2;";
12 int RecordCount = 0;
13 try
14 {
15 myConnection.Open();
16
17 }
18 catch (Exception ex)
19 {
20 }
21 finally
NO.17 {
NO.18 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim col As New DataColumn("UnitPrice", GetType(Decimal))
02
03 OrderDetailTable.Columns.Add(col)
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity"
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)"
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value, 1)"
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)"
Answer: D
Microsoft 070-561参考書 070-561問題集 070-561
NO.19 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
string query = "Select EmpNo, EmpName from dbo.Table_1;
select Name,Age from dbo.Table_2";
SqlCommand command = new SqlCommand(query, connection);
SqlDataReader reader = command.ExecuteReader();
You need to ensure that the application reads all the rows returned by the code segment.
Which code segment should you use?
A. while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.Read();
}
B. while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.NextResult();
}
C. while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
reader.NextResult();
while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
D. while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
reader.Read();
while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
Answer: C
Microsoft認定証 070-561 070-561 070-561 070-561
NO.20 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a SqlDataAdapter object named daOrder. The SelectCommand property of the
daOrder object is set.
You write the following code segment. (Line numbers are included for reference only.)
01 private void ModifyDataAdapter() {
02
03 }
You need to ensure that the daOrder object can also handle updates.
Which code segment should you insert at line 02?
A. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.RefreshSchema();
B. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.SetAllValues = true;
C. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
daOrder.DeleteCommand = cb.GetDeleteCommand();
daOrder.InsertCommand = cb.GetInsertCommand();
daOrder.UpdateCommand = cb.GetUpdateCommand();
D. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.RefreshSchema();
cb.GetDeleteCommand();
cb.GetInsertCommand();
cb.GetUpdateCommand();
Answer: C
Microsoft 070-561認証試験 070-561
NO.21 }
You need to compute the total number of records processed by the Select queries in the RecordCount
variable.
Which code segment should you insert at line 16?
A. myReader = myCommand.ExecuteReader();
RecordCount = myReader.RecordsAffected;
B. while (myReader.Read())
{
//Write logic to process data for the first result.
}
RecordCount = myReader.RecordsAffected;
C. while (myReader.HasRows)
{
while (myReader.Read())
{
//Write logic to process data for the second result.
RecordCount = RecordCount + 1;
myReader.NextResult();
}
}
D. while (myReader.HasRows)
{
while (myReader.Read())
{
//Write logic to process data for the second result.
RecordCount = RecordCount + 1;
}
myReader.NextResult();
}
Answer: D
Microsoft 070-561 070-561 070-561認定証 070-561
22. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application uses Microsoft SQL Server 2005.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim myConnString As String = _
02 "User ID=<username>;password=<strong password>;" + _
03 "Initial Catalog=pubs;Data Source=myServer"
04 Dim myConnection As New SqlConnection(myConnString)
05 Dim myCommand As New SqlCommand()
06 Dim myReader As DbDataReader
07 myCommand.CommandType = CommandType.Text
08 myCommand.Connection = myConnection
09 myCommand.CommandText = _
10 "Select * from Table1;Select * from Table2;"
11 Dim RecordCount As Integer = 0
12 Try
13 myConnection.Open()
14
15 Catch ex As Exception
16 Finally
17 myConnection.Close()
18 End Try
You need to compute the total number of records processed by the Select queries in the RecordCount
variable.
Which code segment should you insert at line 14?
A. myReader = myCommand.ExecuteReader()
RecordCount = myReader.RecordsAffected
B. While myReader.Read()
'Write logic to process data for the first result.
End While
RecordCount = myReader.RecordsAffected
C. While myReader.HasRows
While myReader.Read()
'Write logic to process data for the second result.
RecordCount = RecordCount + 1
myReader.NextResult()
End While
End While
D. While myReader.HasRows
While myReader.Read()
'Write logic to process data for the second result.
RecordCount = RecordCount + 1
End While
myReader.NextResult()
End While
Answer: D
Microsoft参考書 070-561練習問題 070-561 070-561過去問
23. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses data from a Microsoft SQL Server 2005 database table. A Web page of the
application contains a GridView server control.
You write the following code segment. (Line numbers are included for reference only.)
01 private void LoadGrid()
02 {
03 using (SqlCommand command = new SqlCommand())
04 {
05 command.Connection = connection;
06 command.CommandText = "SELECT * FROM Customers";
07 connection.Open();
08
09 }
10 }
You need to retrieve the data from the database table and bind the data to the DataSource property of the
GridView server control.
Which code segment should you insert at line 08?
A. SqlDataReader rdr = command.ExecuteReader();
connection.Close();
GridView1.DataSource = rdr;
GridView1.DataBind();
B. SqlDataReader rdr = command.ExecuteReader();
GridView1.DataSource = rdr.Read();
GridView1.DataBind();
connection.Close();
C. SqlDataReader rdr = command.ExecuteReader();
Object[] values = new Object[rdr.FieldCount];
GridView1.DataSource = rdr.GetValues(values);
GridView1.DataBind();
connection.Close();
D. DataTable dt = new DataTable();
using (SqlDataReader reader = command.ExecuteReader())
{
dt.Load(reader);
}
connection.Close();
GridView1.DataSource = dt;
GridView1.DataBind();
Answer: D
Microsoft 070-561 070-561 070-561過去問 070-561参考書
24. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses data from a Microsoft SQL Server 2005 database table. A Web page of the
application contains a GridView server control.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub LoadGrid()
02 Using command As New SqlCommand()
03 command.Connection = connection
04 command.CommandText = "SELECT * FROM Customers"
05 connection.Open()
06
07 End Using
08 End Sub
You need to retrieve the data from the database table and bind the data to the DataSource property of the
GridView server control.
Which code segment should you insert at line 06?
A. Dim rdr As SqlDataReader = command.ExecuteReader()
connection.Close()
GridView1.DataSource = rdr
GridView1.DataBind()
B. Dim rdr As SqlDataReader = command.ExecuteReader()
GridView1.DataSource = rdr.Read()
GridView1.DataBind()
connection.Close()
C. Dim rdr As SqlDataReader = command.ExecuteReader()
Dim values As Object() = New Object(rdr.FieldCount - 1) {}
GridView1.DataSource = rdr.GetValues(values)
GridView1.DataBind()
D. Dim dt As New DataTable()
Using reader As SqlDataReader = command.ExecuteReader()
dt.Load(reader)
End Using
connection.Close()
GridView1.DataSource = dt
GridView1.DataBind()
Answer: D
Microsoft 070-561 070-561認定証 070-561
NO.22 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. try
{
if(null!=conn)
conn.Close();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null==conn)
conn.Open();
}
B. try
{
conn.Close();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null!=conn)
conn.Open();
}
C. try
{
conn.Open();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null!=conn)
conn.Close();
}
D. try
{
conn.Open();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null==conn)
conn.Close();
}
Answer: C
Microsoft 070-561 070-561問題集
NO.23 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The connection string of the application is defined in the following manner.
"Server=Prod;Database=WingtipToys;Integrated
Security=SSPI;Asynchronous Processing=true"
The application contains the following code segment. (Line numbers are included for reference only.)
01 protected void UpdateData(SqlCommand cmd) {
02 cmd.Connection.Open();
03
04 lblResult.Text = "Updating ...";
05 }
The cmd object takes a long time to execute.
You need to ensure that the application continues to execute while cmd is executing.
What should you do?
A. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(new AsyncCallback(UpdateComplete), cmd);
Add the following code segment.
private void UpdateComplete (IAsyncResult ar) {
int count = (int)ar.AsyncState;
LogResults(count);
}
B. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(new AsyncCallback(UpdateComplete), cmd);
Add the following code segment.
private void UpdateComplete (IAsyncResult ar) {
SqlCommand cmd = (SqlCommand)ar.AsyncState;
int count = cmd.EndExecuteNonQuery(ar);
LogResults(count);
}
C. Insert the following code segment at line 03.
cmd.StatementCompleted += new
StatementCompletedEventHandler(UpdateComplete);
cmd.ExecuteNonQuery();
Add the following code segment.
private void UpdateComplete (object sender, StatementCompletedEventArgs e) {
int count = e.RecordCount;
LogResults(count);
}
D. Insert the following code segment at line 03.
SqlNotificationRequest notification = new
SqlNotificationRequest("UpdateComplete", "", 10000);
cmd.Notification = notification;
cmd.ExecuteNonQuery();
Add the following code segment.
private void UpdateComplete(SqlNotificationRequest notice) {
int count = int.Parse(notice.UserData);
LogResults(count);
}
Answer: B
Microsoft問題集 070-561 070-561 070-561参考書 070-561練習問題
NO.24 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named OrderDS that has the Order and OrderDetail tables as
shown in the following exhibit.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub GetOrders(ByVal cn As SqlConnection)
02 Dim cmd As SqlCommand = cn.CreateCommand()
03 cmd.CommandText = "Select * from [Order]; " + _
"Select * from [OrderDetail];"
04 Dim da As New SqlDataAdapter(cmd)
05
06 End Sub
You need to ensure that the Order and the OrderDetail tables are populated.
Which code segment should you insert at line 05?
A. da.Fill(OrderDS)
B. da.Fill(OrderDS.Order)
da.Fill(OrderDS.OrderDetail)
C. da.TableMappings.AddRange(New DataTableMapping() _
{New DataTableMapping("Table", "Order"), _
New DataTableMapping("Table1", "OrderDetail")})
da.Fill(OrderDS)
D. Dim mapOrder As New DataTableMapping()
mapOrder.DataSetTable = "Order"
Dim mapOrderDetail As New DataTableMapping()
mapOrder.DataSetTable = "OrderDetail"
da.TableMappings.AddRange(New DataTableMapping() _
{mapOrder, mapOrderDetail})
da.Fill(OrderDS)
Answer: C
Microsoft 070-561認証試験 070-561
NO.25 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named orderDS. The object contains a table named Order as
shown in the following exhibit.
The application uses a SqlDataAdapter object named daOrder to populate the Order table.
You write the following code segment. (Line numbers are included for reference only.)
01 private void FillOrderTable(int pageIndex) {
02 int pageSize = 5;
03
04 }
You need to fill the Order table with the next set of 5 records for each increase in the pageIndex value.
Which code segment should you insert at line 03?
A. string sql = "SELECT SalesOrderID, CustomerID, OrderDate FROM Sales.SalesOrderHeader";
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, pageIndex, pageSize, "Order");
B. int startRecord = (pageIndex - 1) * pageSize;
string sql = "SELECT SalesOrderID, CustomerID, OrderDate FROM Sales.SalesOrderHeader";
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, startRecord, pageSize, "Order");
C. string sql = string.Format("SELECT TOP {0} SalesOrderID, CustomerID,
OrderDate FROM Sales.SalesOrderHeader WHERE SalesOrderID > {1}", pageSize, pageIndex);
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, "Order");
D. int startRecord = (pageIndex - 1) * pageSize;
string sql = string.Format("SELECT TOP {0} SalesOrderID, CustomerID,
OrderDate FROM Sales.SalesOrderHeader WHERE SalesOrderID > {1}",
pageSize, startRecord);
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, "Order");
Answer: B
Microsoft 070-561参考書 070-561 070-561問題集 070-561
NO.26 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You need to separate the security-related exceptions from the other exceptions for database operations at
run time.
Which code segment should you use?
A. catch (System.Security.SecurityException ex)
{
//Handle all database security related exceptions.
}
B. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Class.ToString() == "14") {
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
C. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Number == 14){
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
D. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Message.Contains("Security")){
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
Answer: B
Microsoft過去問 070-561 070-561
NO.27 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named orderDS. The object contains a table named Order as
shown in the following exhibit.
The application uses a SqlDataAdapter object named daOrder to populate the Order table.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub FillOrderTable(ByVal pageIndex As Integer)
02 Dim pageSize As Integer = 5
03
04 End Sub
You need to fill the Order table with the next set of 5 records for each increase in the pageIndex value.
Which code segment should you insert at line 03?
A. Dim sql As String = "SELECT SalesOrderID, CustomerID, " + _
"OrderDate FROM Sales.SalesOrderHeader"
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, pageIndex, pageSize, "Order")
B. Dim startRecord As Integer = (pageIndex - 1) * pageSize
Dim sql As String = "SELECT SalesOrderID, CustomerID, " + _
"OrderDate FROM Sales.SalesOrderHeader"
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, startRecord, pageSize, "Order")
C. Dim sql As String = _
String.Format("SELECT TOP {0} SalesOrderID, " + _
"CustomerID, OrderDate FROM Sales.SalesOrderHeader " + _
"WHERE SalesOrderID > {1}", pageSize, pageIndex)
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, "Order")
D. Dim startRecord As Integer = (pageIndex - 1) * pageSize
Dim sql As String = _
String.Format("SELECT TOP {0} SalesOrderID, " + _
"CustomerID, OrderDate FROM Sales.SalesOrderHeader " + _
"WHERE SalesOrderID > {1}", pageSize, startRecord)
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, "Order")
Answer: B
Microsoft過去問 070-561認定試験 070-561練習問題 070-561認定資格 070-561 070-561
NO.28 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
Dim connection As DbConnection = _ New OdbcConnection(connectionString)
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
Dim connection As DbConnection = _ New OleDbConnection(connectionString)
C. Create the connection object in the following manner.
Dim factory As DbProviderFactory = _ DbProviderFactories.GetFactory("System.Data.Odbc")
Dim connection As DbConnection = _ factory.CreateConnection()
D. Create the connection object in the following manner.
Dim factory As DbProviderFactory = _ DbProviderFactories.GetFactory(databaseProviderName)
Dim connection As DbConnection = factory.CreateConnection()
Answer: D
Microsoft過去問 070-561 070-561参考書 070-561 070-561 070-561問題集
NO.29 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 using (SqlConnection connection = new
SqlConnection(sourceConnectionString))
02 using (SqlConnection connection2 = new
SqlConnection(destinationConnectionString))
03 using (SqlCommand command = new SqlCommand())
04 {
05 connection.Open();
06 connection2.Open();
07 using (SqlDataReader reader = command.ExecuteReader())
08 {
09 using (SqlBulkCopy bulkCopy = new
SqlBulkCopy(connection2))
10 {
11
12 }
13 }
14 }
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 11?
A. reader.Read()
bulkCopy.WriteToServer(reader);
B. bulkCopy.DestinationTableName = "Transactions";
bulkCopy.WriteToServer(reader);
C. bulkCopy.DestinationTableName = "Transactions";
bulkCopy.SqlRowsCopied += new
SqlRowsCopiedEventHandler(bulkCopy_SqlRowsCopied);
D. while (reader.Read())
{
bulkCopy.WriteToServer(reader);
}
Answer: B
Microsoft参考書 070-561 070-561練習問題 070-561
NO.30 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment. (Line numbers are included for reference only.)
01 using (SqlConnection connection = new
SqlConnection(connectionString)) {
02 SqlCommand cmd = new SqlCommand(queryString, connection);
03 connection.Open();
04
05 while (sdrdr.Read()){
06 // use the data in the reader
07 }
08 }
You need to ensure that the memory is used efficiently when retrieving BLOBs from the database.
Which code segment should you insert at line 04?
A. SqlDataReader sdrdr = cmd.ExecuteReader();
B. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.Default);
C. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.SchemaOnly);
D. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.SequentialAccess);
Answer: D
Microsoft過去問 070-561過去問 070-561 070-561認定試験
Pass4Testは最新の70-481試験問題集と高品質の1Z0-597認定試験の問題と回答を提供します。Pass4TestのJN0-360 VCEテストエンジンとLOT-441試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_TFIN52_66トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论