Pass4Testの専門家チームがMicrosoftの070-463認定試験に彼らの自分の経験と知識を利用して絶えなく研究し続けています。Pass4Testが提供したMicrosoftの070-463試験問題と解答が真実の試験の練習問題と解答は最高の相似性があり、一年の無料オンラインの更新のサービスがあり、100%のパス率を保証して、もし試験に合格しないと、弊社は全額で返金いたします。
いまMicrosoftの070-463認定試験に関連する優れた資料を探すのに苦悩しているのですか。もうこれ以上悩む必要がないですよ。ここにはあなたが最も欲しいものがありますから。受験生の皆さんの要望に答えるように、Pass4Testは070-463認定試験を受験する人々のために特に効率のあがる勉強法を開発しました。受験生の皆さんはほとんど仕事しながら試験の準備をしているのですから、大変でしょう。試験に準備するときにはあまり多くの時間を無駄にすることを避けるように、Pass4Testは短時間の勉強をするだけで試験に合格することができる070-463問題集が用意されています。この問題集には実際の試験に出る可能性のあるすべての問題が含まれています。従って、この問題集を真面目に学ぶ限り、070-463認定試験に合格するのは難しいことではありません。
Microsoftの070-463認定試験は業界で広く認証されたIT認定です。世界各地の人々はMicrosoftの070-463認定試験が好きです。この認証は自分のキャリアを強化することができ、自分が成功に近づかせますから。Microsoftの070-463試験と言ったら、Pass4Test のMicrosoftの070-463試験トレーニング資料はずっとほかのサイトを先んじているのは、Pass4Test にはIT領域のエリートが組み立てられた強い団体がありますから。その団体はいつでも最新のMicrosoft 070-463試験トレーニング資料を追跡していて、彼らのプロな心を持って、ずっと試験トレーニング資料の研究に力を尽くしています。
Pass4Testは多くの認証業界の評判を持っています。それは我々はMicrosoftの070-463問題集や070-463スタディガイドや070-463問題と解答がたくさんありますから。現在のサイトで最もプロなITテストベンダーとして我々は完璧なアフターサービスを提供します。全てのお客様に追跡サービスを差し上げますから、あなたが買ったあとの一年間で、弊社は全てのお客様に問題集のアップグレードを無料に提供します。その間で認定テストセンターのMicrosoftの070-463試験問題は修正とか表示されたら、無料にお客様に保護して差し上げます。Microsoftの070-463試験問題集はPass4TestのIT領域の専門家が心を込めて研究したものですから、Pass4TestのMicrosoftの070-463試験資料を手に入れると、あなたが美しい明日を迎えることと信じています。
あなたはまだ何を待っているのですか。機会が一回だけありますよ。いまMicrosoftの070-463試験問題のフルバージョンを取ることができます。Pass4Testというサイトをクッリクしたらあなたの願いを果たせます。あなたが最も良いMicrosoftの070-463試験トレーニング資料を見つけましたから、Pass4Testの問題と解答を安心に利用してください。きっと試験に合格しますよ。
試験番号：070-463問題集
試験科目：Microsoft 「Implementing a Data Warehouse with Microsoft SQL Server 2012」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-03-27
問題と解答：全123問
もし弊社のMicrosoftの070-463認証試験について問題集に興味があったら、購入するまえにインターネットで弊社が提供した無料な部分問題集をダウンロードして、君の試験に役に立つかどうかのを自分が判断してください。それにPass4Testは一年の無料な更新のサービスを提供いたします。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/070-463.html
NO.1 You are reviewing the design of a customer dimension table in an existing data warehouse hosted on
SQL Azure.
The current dimension design does not allow the retention of historical changes to customer attributes
such as Postcode.
You need to redesign the dimension to enable the full historical reporting of changes to multiple customer
attributes including Postcode.
What should you do?
A.Add StartDate and EndDate columns to the customer dimension.
B Add an IsCurrent column to the customer dimension.
C.Enable Snapshot Isolation on the data warehouse.
D.Add CurrentValue and PreviousValue columns to the customer dimension.
Answer: A
Microsoft練習問題 070-463問題集 070-463認定資格
NO.2 You are designing a data warehouse hosted on SQL Azure.The data warehouse currently includes the
dimUser and dimDistrict dimension tables and the factSales fact table.The dimUser table contains records
for each user permitted to run reports against the warehouse; and the dimDistrict table contains
information about sales districts.
The system is accessed by users from certain districts, as well as by area supervisors and users from the
corporate headquarters.
You need to design a table structure to ensure that certain users can see sales data for only certain
districts.Some users must be permitted to see sales data from multiple districts.
What should you do?
A.Add a district column to the dimUser table.
B.Partition the factSales table on the district column.
C.Create a userDistrict table that contains primary key columns from the dimUser and dimDistrict tables.
D.For each district, create a view of the factSales table that includes a WHERE clause for the district.
Answer: C
Microsoft認定試験 070-463過去問 070-463
NO.3 You develop and deploy a SQL Server Integration Services (SSIS) package.
The package is stored in the file system.
You need to execute the package without importing it to the SSIS server.
What should you use to execute the package? (Each correct answer presents a complete
solution.Choose all that apply.)
A.catalog.start_package
B.dtexec
C.SQL Server Management Studio
D.SQL Server Agent
Answer: CA
Microsoft問題集 070-463 070-463過去問 070-463問題集 070-463 070-463認証試験
NO.4 DRAG DROP
A SQL Server Integration Services (SSIS) package named DataFeed interacts with an external vendor
data feed.The package is executed several times a day, either as part of other packages' control flow or
by itself.The external data feed is unreliable because network failures and slow response times are
frequent.The package is currently deployed on the file system.
To analyze the reliability of the external data feed, you must collect execution data.Every time the
DataFeed package is executed, the following information must be logged:
Start Time
End Time
Execution Result
Execution Duration
You need to design a logging solution that meets the requirements by using the least amount of
administrative and development effort.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.5 You are designing a data warehouse for a software distribution business that stores sales by software
title.It stores sales targets by software category.Software titles are classified into subcategories and
categories.Each software title is included in only a single software subcategory, and each subcategory is
included in only a single category.The data warehouse will be a data source for an Analysis Services
cube.
The data warehouse contains two fact tables:
factSales, used to record daily sales by software title
factTarget, used to record the monthly sales targets by software category
Reports must be developed against the warehouse that reports sales by software title, category and
subcategory, and sales targets.
You need to design the software title dimension.The solution should use as few tables as possible while
supporting all the requirements.
What should you do?
A.Create three software tables, dimSoftware, dimSoftwareCategory.and dimSoftwareSubcategory and a
fourth bridge table that joins software titles to their appropriate category and subcategory table records
with foreign key constraints.Direct the cube developer to use key granularity attributes.
B.Create three software tables, dimSoftware, dimSoftwareCategory, and
dimSoftwareSubcategory.Connect factSales to all three tables and connect factTarget to
dimSoftwareCategory with foreign key constraints.Direct the cube developer to use key granularity
attributes.
C.Create one table, dimSoftware, which contains Software Detail, Category, and Subcategory
columns.Connect factSales to dimSoftware with a foreign key constraint.Direct the cube developer to use
a non-key granularity attribute for factTarget.
D.Create two tables, dimSoftware and dimSoftwareCategory.Connect factSales to dimSoftware and
factTarget to dimSoftwareCategory with foreign key constraints.Direct the cube developer to use key
granularity attributes.
Answer: C
Microsoft認定資格 070-463練習問題 070-463
NO.6 You are reviewing the design of an existing fact table named factSales, which is loaded from a SQL
Azure database by a SQL Server Integration Services (SSIS) package each day.The fact table has
approximately 1 billion rows and is dimensioned by product, sales date, and sales time of day.
The database administrator is concerned about the growth of the database.Users report poor reporting
performance against this database.Reporting requirements have recently changed and the only
remaining report that uses this fact table reports sales by product name, sale month, and sale year.No
other reports will be created against this table.
You need to reduce the report processing time and minimize the growth of the database.
What should you do?
A.Partition the table by product type.
B.Create a view over the fact table to aggregate sales by month.
C.Change the granularity of the fact table to month.
D.Create an indexed view over the fact table to aggregate sales by month.
Answer: C
Microsoft 070-463 070-463 070-463
NO.7 You develop a SQL Server Integration Services (SSIS) package that imports SQL Azure data into a data
warehouse every night.
The SQL Azure data contains many misspellings and variations of abbreviations.To import the data, a
developer used the Fuzzy Lookup transformation to choose the closest-matching string from a reference
table of allowed values.The number of rows in the reference table is very large.
If no acceptable match is found, the Fuzzy Lookup transformation passes a null value.
The current setting for the Fuzzy Lookup similarity threshold is 0.50.
Many values are incorrectly matched.
You need to ensure that more accurate matches are made by the Fuzzy Lookup transformation without
degrading performance.
What should you do?
A.Change the Exhaustive property to True,
B.Change the similarity threshold to 0.55.
C.Change the similarity threshold to 0.40.
D.Increase the maximum number of matches per lookup.
Answer: B
Microsoft 070-463認定資格 070-463 070-463
NO.8 You maintain a SQL Server Integration Services (SSIS) package.The package was developed by using
SQL Server 2008 Business Intelligence Development Studio (BIDS).
The package includes custom scripts that must be upgraded.
You need to upgrade the package to SQL Server 2012.
Which tool should you use?
A.SSIS Upgrade Wizard in SQL Server 2008 BIDS
B.SSIS Upgrade Wizard in SQL Server Data Tools
C.SQL Server DTExecUI utility (dtexecui.exe)
D.SQL Server dtexec utility (dtexec.exe)
Answer: B
Microsoft認定証 070-463 070-463
NO.9 You are developing a SQL Server Integration Services (SSIS) project that copies a large amount of
rows from a SQL Azure database.The project uses the Package Deployment Model.This project is
deployed to SQL Server on a test server.
You need to ensure that the project is deployed to the SSIS catalog on the production server.
What should you do?
A.Open a command prompt and run the dtexec /dumperror /conn command.
B.Create a reusable custom logging component and use it in the SSIS project.
C.Open a command prompt and run the gacutil command.
D.Add an OnError event handler to the SSIS project.
E.Open a command prompt and execute the package by using the SQL Log provider and running the
dtexecui.exe utility.
F.Open a command prompt and run the dtexec /rep /conn command.
G.Open a command prompt and run the dtutil /copy command.
H.Use an msi file to deploy the package on the server.
I.Configure the SSIS solution to use the Project Deployment Model.
J.Configure the output of a component in the package data flow to use a data tap.
K.Run the dtutil command to deploy the package to the SSIS catalog and store the configuration in SQL
Server.
Answer: I
Microsoft 070-463 070-463参考書 070-463認定証
NO.10 You are designing an enterprise star schema that will consolidate data from three independent data
marts.One of the data marts is hosted on SQL Azure.
Most of the dimensions have the same structure and content.However, the geography dimension is
slightly different in each data mart.
You need to design a consolidated dimensional structure that will be easy to maintain while ensuring that
all dimensional data from the three original solutions is represented.
What should you do?
A.Create a junk dimension for the geography dimension.
B.Implement change data capture.
C.Create a conformed dimension for the geography dimension.
D.Create three geography dimensions.
Answer: C
Microsoft 070-463 070-463 070-463認定試験
NO.11 DRAG DROP
A SQL Server Integration Services (SSIS) project has been deployed to the SSIS catalog.The project
includes a project Connection Manager to connect to the data warehouse.The SSIS catalog includes two
Environments:
Development
QA
Each Environment defines a single Environment Variable named ConnectionString of type string.The
value of each variable consists of the connection string to the development or QA data warehouses.
You need to be able to execute deployed packages by using either of the defined Environments.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.12 You are designing a data warehouse with two fact tables.The first table contains sales per month and
the second table contains orders per day.
Referential integrity must be enforced declaratively.
You need to design a solution that can join a single time dimension to both fact tables.
What should you do?
A.Create a time mapping table.
B.Change the level of granularity in both fact tables to be the same.
C.Merge the fact tables.
D.Create a view on the sales table.
Answer: C
Microsoft 070-463 070-463
NO.13 DRAG DROP
You are editing a SQL Server Integration Services (SSIS) package that contains a task with a sensitive
property.
You need to create a project parameter and configure it so that its value is encrypted when it is deployed
to the SSIS catalog.
Which three steps should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.14 You are developing a SQL Server Integration Services (SSIS) package.
To process complex scientific data originating from a SQL Azure database, a custom task component is
added to the project.
You need to ensure that the custom component is deployed on a test environment correctly.
What should you do?
A.Add an OnError event handler to the SSIS project.
B.Open a command prompt and run the gacutil command.
C.Configure the SSIS solution to use the Project Deployment Model.
D.Open a command prompt and run the dtexec /dumperror /conn command.
E.Configure the output of a component in the package data flow to use a data tap.
F.Open a command prompt and execute the package by using the SQL Log provider and running the
dtexecui.exe utility.
G.Open a command prompt and run the dtexec /rep /conn command.
H.Run the dtutil command to deploy the package to the SSIS catalog and store the configuration in SQL
Server.
I.Use an msi file to deploy the package on the server.
J.Open a command prompt and run the dtutil /copy command.
K.Create a reusable custom logging component and use it in the SSIS project.
Answer: B
Microsoft 070-463 070-463認定試験 070-463
NO.15 You install a SQL Server 2012 database engine instance on a production server.A month later, you
install SQL Server 2012 Integration Services (SSIS).
You must develop an SSIS project and deploy it to the server by using the Project Deployment model.
Operations Log records that are outside the configured retention period must be cleaned automatically.
You need to create the SSIS catalog on the production server.
What should you do? (Each correct answer presents part of the solution.Choose all that apply.)
A.Enable XP Command Shell.
B.Enable CLR Integration.
C.Enable OLE Automation.
D.Start the SQL Server Browser service.
E.Enable Cross Database Ownership Chaining.
F.Start the SQL Server Agent service.
G.Enable Ad Hoc Remote Queries.
Answer: FA
Microsoft問題集 070-463練習問題 070-463 070-463過去問
NO.16 You are implementing the indexing strategy for a fact table in a data warehouse.The fact table is
named Quotes.The table has no indexes and consists of seven columns:
[ID]
[QuoteDate]
[Open]
[Close]
[High]
[Low]
[Volume]
Each of the following queries must be able to use a columnstore index:
SELECT AVG ([Close]) AS [AverageClose] FROM Quotes WHERE [QuoteDate] BETWEEN '20100101'
AND '20101231'.
SELECT AVG([High] - [Low]) AS [AverageRange] FROM Quotes WHERE [QuoteDate] BETWEEN
'20100101' AND
'20101231'.
SELECT SUM([Volume]) AS [SumVolume] FROM Quotes WHERE [QuoteDate] BETWEEN '20100101'
AND '20101231'.
You need to ensure that the indexing strategy meets the requirements.The strategy must also minimize
the number and size of the indexes.
What should you do?
A.Create one columnstore index that contains [ID], [Close], [High], [Low], [Volume], and [QuoteDate].
B.Create three coiumnstore indexes:
One containing [QuoteDate] and [Close]
One containing [QuoteDate], [High], and [Low]
One containing [QuoteDate] and [Volume]
C.Create one columnstore index that contains [QuoteDate], [Close], [High], [Low], and [Volume].
D.Create two columnstore indexes:
One containing [ID], [QuoteDate], [Volume], and [Close]
One containing [ID], [QuoteDate], [High], and [Low]
Answer: C
Microsoft認定証 070-463 070-463 070-463
NO.17 DRAG DROP
A new SQL Server Integration Services (SSIS) project is deployed to the SSIS catalog.
To troubleshoot some data issues, you must output the data streaming through several data flows into text
files for further analysis.You have the list of data flow package paths and identification strings of the
various task components that must be analyzed.
You need to create these output files with the least amount of administrative and development effort.
Which three stored procedures should you execute in sequence? (To answer, move the appropriate
actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.18 A SQL Server Integration Services (SSIS) package on a computer is failing periodically in
production.The package was created less than one year ago and was deployed to the SSIS catalog.
Sometimes the package is started on a SQL Agent schedule; sometimes the package is started manually
by an SSIS developer by using the Object Explorer in SQL Server Management Studio.
You need to identify the authenticated user responsible for starting the package each time it failed in the
past.
Where can you find this information?
A.the SQL Server Log
B.the SSISDB.[catalog].[executions] view
C.the SSISDB.[catalog].[event_messages] view
D.the SQL Agent Job History
E.the SQL Agent Error Log
Answer: B
Microsoft過去問 070-463 070-463練習問題 070-463参考書 070-463参考書
NO.19 You are developing a project that contains multiple SQL Server Integration Services (SSIS)
packages.The packages will be deployed to the SSIS catalog.One of the steps in each package accesses
an FTP site to download sales transaction data.
You create project parameters to store the username and password that are used to access the FTP site.
You need to ensure that the username and password values are encrypted when they are deployed.
What should you do?
A.set the Sensitive property of the parameters to True.
B.Set the ProtectionLevel property of the package to EncryptSensitiveWithUserKey.
C.Change the parameters to package parameters.
D.Change the project to the Legacy Deployment model.
Answer: A
Microsoft 070-463 070-463認定資格 070-463認定資格 070-463
NO.20 To facilitate the troubleshooting of SQL Server Integration Services (SSIS) packages, a logging
methodology is put in place.The methodology has the following requirements:
The deployment process must be simplified.
All the logs must be centralized in SQL Server.
Log data must be available via reports or T-SQL.
Log archival must be automated.
You need to configure a logging methodology that meets the requirements while minimizing the amount of
deployment and development effort.
What should you do?
A.Open a command prompt and run the gacutil command.
B.Open a command prompt and execute the package by using the SQL Log provider and running the
dtexecui.exe utility.
C.Add an OnError event handler to the SSIS project.
D.Use an msi file to deploy the package on the server.
E.Configure the output of a component in the package data flow to use a data tap.
F.Run the dtutil command to deploy the package to the SSIS catalog and store the configuration in SQL
Server.
G.Open a command prompt and run the dtexec /rep /conn command.
H.Open a command prompt and run the dtutil /copy command.
I.Open a command prompt and run the dtexec /dumperror /conn command.
J.Configure the SSIS solution to use the Project Deployment Model.
K.Create a reusable custom logging component and use it in the SSIS project.
Answer: J
Microsoft問題集 070-463認定資格 070-463 070-463 070-463
Pass4Testは最新の70-489試験問題集と高品質のJN0-314認定試験の問題と回答を提供します。Pass4Testの00M-617 VCEテストエンジンと00M-620試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP5-T01Dトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论