2014年1月18日星期六

Microsoft 070-642認定試験の資格を通して将来性を広げる

Pass4TestはMicrosoftの070-642認定試験に対して問題集を提供しておるサイトで、現場のMicrosoftの070-642試験問題と模擬試験問題集を含みます。ほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。ass4Testが提供した資料は最も全面的で、しかも更新の最も速いです。

070-642認定試験を受験したいですか。070-642認証資格を取得したいですか。試験に準備する時間が足りないあなたは、どうやって試験に合格できますか。しようがないわけではないです。短時間の準備でも楽に試験に合格することができるようになりますよ。それでは、どのようにすればそれを達成できますか。実は方法がとても簡単です。すなわちPass4Testの070-642問題集を利用して試験の準備をすることです。

070-642認定試験の準備をするために、Pass4Test の専門家たちは彼らの豊富な知識と実践を生かして特別なトレーニング資料を研究しました。Pass4Test のMicrosoftの070-642問題集はあなたが楽に試験に受かることを助けます。Pass4Test のMicrosoftの070-642練習テストは070-642試験問題と解答、 070-642 問題集、070-642 書籍や070-642勉強ガイドに含まれています。

Microsoftの070-642認定試験を一回合格するためには必ず良い準備しなければなりません。完全な知識がこの高度専門の試験に合格するのは必要でPass4Testは君にこれらの資源を完全な需要に備わっています。

あなたはいまMicrosoftの070-642認定試験にどうやって合格できるかということで首を傾けているのですか。Microsoftの070-642認定試験は現在のいろいろなIT認定試験における最も価値のある資格の一つです。ここ数十年間では、インターネット・テクノロジーは世界中の人々の注目を集めているのです。それがもう現代生活の不可欠な一部となりました。その中で、Microsoftの認証資格は広範な国際的な認可を得ました。ですから、IT業界で仕事している皆さんはMicrosoftの認定試験を受験して資格を取得することを通して、彼らの知識やスキルを向上させます。070-642認定試験はMicrosoftの最も重要な試験の一つです。この資格は皆さんに大きな利益をもたらすことができます。

Microsoftの070-642試験に受かることは確かにあなたのキャリアに明るい未来を与えられます。Microsoftの070-642試験に受かったら、あなたの技能を検証できるだけでなく、あなたが専門的な豊富の知識を持っていることも証明します。Pass4TestのMicrosoftの070-642試験トレーニング資料は実践の検証に合格したソフトで、手に入れたらあなたに最も向いているものを持つようになります。 Pass4TestのMicrosoftの070-642試験トレーニング資料を購入する前に、無料な試用版を利用することができます。そうしたら資料の高品質を知ることができ、一番良いものを選んだということも分かります。

試験番号:070-642問題集
試験科目:Microsoft 「TS: Windows Server 2008 Network Infrastructure, Configuring Certification 」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2014-01-18
問題と解答:全400問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/070-642.html

NO.1 Your network contains a server that has the SNMP Service installed.
You need to configure the SNMP security settings on the server.
Which tool should you use?
A. Local Security Policy
B. Scw
C. Secedit
D. Services console
Answer: D

Microsoft   070-642参考書   070-642   070-642

NO.2 You need to capture the HTTP traffic to and from a server every day between 09:00 and 10:00.
What should you do?
A. Create a scheduled task that runs the Netsh tool.
B. Create a scheduled task that runs the Nmcap tool.
C. From Network Monitor, configure the General options.
D. From Network Monitor, configure the Capture options.
Answer: B

Microsoft   070-642認定証   070-642過去問   070-642過去問

NO.3 You have a Windows Server 2008 R2 computer that has an IP address of 172.16.45.9/21. The server
is configured to use IPv6 addressing.
You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt?
A. Type ping 172.16.45.9:::::.
B. Type ping ::9.45.16.172.
C. Type ping followed by the Link-local address of the server.
D. Type ping followed by the Site-local address of the server.
Answer: C

Microsoft認定資格   070-642   070-642問題集   070-642認証試験

NO.4 Your network contains a server that runs Windows Server 2008 R2. You plan to create a custom script.
You need to ensure that each time the script runs, an entry is added to the Application event log.
Which tool should you use.?
A. Eventcreate
B. Eventvwr
C. Wecutil
D. Wevtutil
Answer: A

Microsoft認定証   070-642認定証   070-642認証試験

NO.5 Your network contains a DHCP server named DHCP1 that runs Windows Server 2008 R2. All client
computers on the network obtain their network configurations from DHCP1. You have a client computer
named Client1 that runs Windows 7 Enterprise. You need to configure Client1 to use a different DNS
server than the other client computers on the network. What should you do?
A. Configure the scope options.
B. Create a reservation.
C. Create a DHCP filter.
D. Define a user class.
Answer: B

Microsoft認定証   070-642認定資格   070-642認証試験   070-642認定試験   070-642問題集

NO.6 Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A
DHCP server is deployed on the network and configured to provide IPv6 prefixes. You need to ensure that
when you monitor network traffic, you see the interface identifiers derived from the Extended Unique
Identifier (EUI)-64 address. Which command should you run?
A. netsh.exe interface ipv6 set global addressmaskreply=disabled
B. netsh.exe interface ipv6 set global dhcpmediasense=enabled
C. netsh.exe interface ipv6 set global randomizeidentifiers=disabled
D. netsh.exe interface ipv6 set privacy state=enabled
Answer: C

Microsoft   070-642   070-642   070-642   070-642

NO.7 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 is
configured as a DNS server.
You need to ensure that Server1 only resolves queries issued from client computers in the same subnet
as Server1. The solution must ensure that Server1 can resolve Internet host names.
What should you do on Server1?
A. Configure Windows Firewall.
B. Create a conditional forwarder.
C. Modify the routing table.
D. Create a trust anchor.
Answer: A

Microsoft参考書   070-642参考書   070-642参考書   070-642練習問題

NO.8 Your network contains 100 servers that run Windows Server 2008 R2. A server named Server1 is
deployed on the network. Server1 will be used to collect events from the Security event logs of the other
servers on the network.
You need to define the Custom Event Delivery Optimization settings on Server1.
Which tool should you use?
A. Event Viewer
B. Task Scheduler
C. Wecutil
D. Wevtutil
Answer: C

Microsoft練習問題   070-642練習問題   070-642認証試験   070-642認証試験

NO.9 Your company is designing its public network. The network will use an IPv4 range of 131.107.40.0/22.
The network must be configured as shown in the following exhibit.
You need to configure subnets for each segment.
Which network addresses should you assign?
A. Segment A: 131.107.40.0/23
Segment B: 131.107.42.0/24
Segment C: 131.107.43.0/25
Segment D: 131.107.43.128/27
B. Segment A: 131.107.40.0/25
Segment B: 131.107.40.128/26
Segment C: 131.107.43.192/27
Segment D: 131.107.43.224/30
C. Segment A: 131.107.40.0/23
Segment B: 131.107.41.0/24
Segment C: 131.107.41.128/25
Segment D: 131.107.43.0/27
D. Segment A: 131.107.40.128/23
Segment B: 131.107.43.0/24
Segment C: 131.107.44.0/25
Segment D: 131.107.44.128/27
Answer: A

Microsoft   070-642   070-642認定証   070-642   070-642

NO.10 Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.
You need to ensure that the server can communicate with all segments on the IPv6 network.
What should you do?
A. Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8.
B. Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64.
C. Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64.
D. Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64.
Answer: A

Microsoft認定証   070-642認定証   070-642   070-642練習問題   070-642

NO.11 Your company has computers in multiple locations that use IPv4 and IPv6. Each location is protected
by a firewall that performs symmetric NAT.
You need to allow peer-to-peer communication between all locations. What should you do?
A. Configure dynamic NAT on the firewall.
B. Configure the firewall to allow the use of Teredo.
C. Configure a link local IPv6 address for the internal interface of the firewall.
D. Configure a global IPv6 address for the external interface of the firewall.
Answer: B

Microsoft参考書   070-642   070-642

NO.12 Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link
connects the main office to a branch office. All computers in the branch office are configured with static IP
addresses. The branch office does not use DHCP and uses a different subnet.
You need to ensure that the portable computers can connect to network resources at the main office and
the branch office.
How should you configure each portable computer?
A. Use a static IPv4 address in the range used at the branch office.
B. Use an alternate configuration that contains a static IP address in the range used at the main office.
C. Use the address that was assigned by the DHCP server as a static IP address.
D. Use an alternate configuration that contains a static IP address in the range used at the branch office.
Answer: D

Microsoft問題集   070-642認定資格   070-642練習問題

NO.13 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
SNMP Service installed.
You perform an SNMP query against Server1 and discover that the query returns the incorrect
identification information.
You need to change the identification information returned by Server1. What should you do?
A. From the properties of the SNMP Service, modify the Agent settings.
B. From the properties of the SNMP Service, modify the General settings.
C. From the properties of the SNMP Trap Service, modify the Logon settings.
D. From the properties of the SNMP Trap Service, modify the General settings.
Answer: A

Microsoft練習問題   070-642   070-642認定試験   070-642認定証

NO.14 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Routing and Remote Access service (RRAS) role service installed. You need to view all inbound VPN
packets. The solution must minimize the amount of data collected.
What should you do?
A. From RRAS, create an inbound packet filter.
B. From Network Monitor, create a capture filter.
C. From the Registry Editor, configure file tracing for RRAS.
D. At the command prompt, run netsh.exe ras set tracing rasauth enabled.
Answer: B

Microsoft認定資格   070-642認定試験   070-642   070-642過去問   070-642過去問

NO.15 You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network
connections named LAN1 and LAN2.
You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server
must continue to respond to non-DHCP client requests on LAN2.
What should you do?
A. From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B. From the DHCP snap-in, create a new multicast scope.
C. From the properties of the LAN1 network connection, set the metric value to 1.
D. From the properties of the LAN2 network connection, set the metric value to 1.
Answer: A

Microsoft過去問   070-642参考書   070-642   070-642練習問題   070-642   070-642

NO.16 Your network contains a domain controller named DC1 and a member server named Server1.
You save a copy of the Active Directory Web Services (ADWS) event log on DC1. You copy the log to
Server1.
You open the event log file on Server1 and discover that the event description information is unavailable.
You need to ensure that the event log file displays the same information when the file is open on Server1
and on DC1.
What should you do on Server1?
A. Import a custom view.
B. Copy the SYSVOL folder from DC1.
C. Copy the LocaleMetaData folder from DC1.
D. Create a custom view.
Answer: C

Microsoft   070-642認定試験   070-642認定試験

NO.17 Your company has an IPv4 Ethernet network.
A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a
segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer
named WKS1 requires access to servers on the Private1 network. The WKS1 computer configuration is
as shown in the following table.
WKS1 is unable to connect to the Private1 network by using the current configuration. You need to add a
persistent route for the Private1 network to the routing table on WKS1.
Which command should you run on WKS1?
A. Route add -p 10.128.4.0/22 10.128.4.1
B. Route add -p 10.128.4.0/26 10.128.64.10
C. Route add -p 10.128.4.0 mask 255.255.255.192 10.128.64.1
D. Route add -p 10.128.64.10 mask 255.255.255.192 10.128.4.0
Answer: B

Microsoft   070-642   070-642

NO.18 You have a DHCP server that runs Windows Server 2008 R2. You need to reduce the size of the
DHCP database.
What should you do?
A. From the DHCP snap-in, reconcile the database.
B. From the folder that contains the DHCP database, run jetpack.exe dhcp.mdb temp.mdb.
C. From the properties of the dhcp.mdb file, enable the File is ready for archiving attribute.
D. From the properties of the dhcp.mdb file, enable the Compress contents to save disk space attribute.
Answer: B

Microsoft認証試験   070-642   070-642   070-642   070-642

NO.19 Your company is designing its network. The network will use an IPv6 prefix of
2001:DB8:BBCC:0000::/53. You need to identify an IPv6 addressing scheme that will support 2000
subnets.
Which network mask should you use?
A. /61
B. /62
C. /63
D. /64
Answer: D

Microsoft   070-642   070-642過去問   070-642参考書

NO.20 Your network uses IPv4.
You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with
two network interfaces.
You need to configure routing on the server at the branch office. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Install the Routing and Remote Access Services role service.
B. Run the netsh ras ip set access ALL command.
C. Run the netsh interface ipv4 enable command.
D. Enable the IPv4 Router Routing and Remote Access option.
Answer: A, D

Microsoft認定試験   070-642認定試験   070-642練習問題   070-642   070-642

Pass4Testは最新の000-273試験問題集と高品質の70-583認定試験の問題と回答を提供します。Pass4TestのHP2-Z27 VCEテストエンジンと000-122試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_TERP10_65トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.pass4test.jp/070-642.html

没有评论:

发表评论