あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。Pass4Test MicrosoftのMB7-839試験問題集はあなたが自分の目標を達成することを助けられます。Pass4Test MicrosoftのMB7-839問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の１００パーセント真実な解答を提供することを保証します。
我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。Pass4Test MicrosoftのMB7-839試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。インターネットで時勢に遅れないMB7-839勉強資料を提供するというサイトがあるかもしれませんが、Pass4Testはあなたに高品質かつ最新のMicrosoftのMB7-839トレーニング資料を提供するユニークなサイトです。Pass4Testの勉強資料とMicrosoftのMB7-839に関する指導を従えば、初めてMicrosoftのMB7-839認定試験を受けるあなたでも一回で試験に合格することができます。
MB7-839はMicrosoftの一つ認証試験として、もしMicrosoft認証試験に合格してIT業界にとても人気があってので、ますます多くの人がMB7-839試験に申し込んで、MB7-839試験は簡単ではなくて、時間とエネルギーがかかって用意しなければなりません。
短い時間に最も小さな努力で一番効果的にMicrosoftのMB7-839試験の準備をしたいのなら、Pass4TestのMicrosoftのMB7-839試験トレーニング資料を利用することができます。Pass4Testのトレーニング資料は実践の検証に合格すたもので、多くの受験生に証明された１００パーセントの成功率を持っている資料です。Pass4Testを利用したら、あなたは自分の目標を達成することができ、最良の結果を得ます。
Pass4TestのMB7-839問題集を入手してから、非常に短い時間で試験に準備しても、あなたは順調に試験に合格することができます。Pass4Testの問題集には、実際の試験に出る可能性がある問題が全部含まれていますから、問題集における問題を覚える限り、簡単に試験に合格することができます。これは試験に合格する最速のショートカットです。仕事に忙しいから試験の準備をする時間はあまりないとしたら、絶対Pass4TestのMB7-839問題集を見逃すことはできないです。これはあなたがMB7-839試験に合格できる最善で、しかも唯一の方法ですから。
学歴は実力と等しくなく、能力とも等しくないです。本当の能力は実践で鍛えたもので、学歴と直接な関係がないです。「私はだめです。」と思わないでください。MicrosoftのMB7-839試験に申し込んだあなたは自分が合格できないなんてを心配だったら、Pass4TestのMicrosoftのMB7-839試験トレーニング資料を利用してください。学歴がどんなに高くて、能力がどんなに低くても、首尾よく試験に合格することができます。
試験番号：MB7-839問題集
試験科目：Microsoft 「NAV 2009 Core Setup and Finance」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2013-11-24
問題と解答：全93問
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/MB7-839.html
NO.1 You work in an international company which is called Wikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. According to the requirement of your company, you are going to initiate the
void process for a posted check. From which page do you perform this?
A.You initiate the void process for a posted check from Payment Journal
B.You initiate the void process for a posted check from Check Ledger Entries
C.You initiate the void process for a posted check from Vendor Ledger Entries
D.You initiate the void process for a posted check from Bank Account Reconciliations
Answer:B
Microsoft MB7-839過去問 MB7-839参考書 MB7-839認定試験 MB7-839認証試験 MB7-839
NO.2 You work in an international company which is called Wikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. Your company receives a client. And you are appointed to assist the client in
setting up prepayments for customers and vendors. Now your client is not clear about the various setups
and asks you to give an explanation. So what do you reply to him? (choose more than one)
A.Enter the default prepayment percentage in the Prepayment % field on the Invoicing FastTab of the
Customer or Vendor Card.
B.Enter the default prepayment percentage in the Prepayment % field on the Purchases Payables Setup
and Sales Receivables Setup pages
C.Enter prepayment percentages on customers and vendors to apply to all lines entered on sales and
purchase orders, regardless of the Type on the line
D.Select the Check Prepmnt. When Posting check box on the General FastTab of Purchases Payables
Setup and Sales Receivables Setup pages to verify prepayments have been issued or received prior to
posting standard invoices
Answer:A C D
Microsoft認定証 MB7-839 MB7-839 MB7-839問題集
NO.3 You work in an international company which is called Wikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. There're posting amounts received from customers. According to the
requirement of your company, you are posting amounts in the Cash Receipt Journal. When you select
Customer in the Account Type field, in the Document Type and Amount fields, what entries must you
make?
A.Document Type of Payment; Amount is negative
B.Document Type of Payment; Amount is positive
C.Document Type of Receipt; Amount is negative
D.Document Type of Receipt; Amount is positive
Answer:A
Microsoft MB7-839 MB7-839過去問 MB7-839 MB7-839練習問題
NO.4 You work in an international company which is called Wikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. You have set up two dimensions: one for Department with values of Sales and
Administration, and then one for Region with values of East, West, and Central. For customer 10000, you
assigned the Region dimension with a value of West and the Department dimension with a value of Sales;
the Value Posting rule is blank for both dimensions. For G/L account 6100, the Department dimension is
assigned a value of Administration and the Value Posting rule is set to Same Code. In the Default
Dimension Priorities, the priority is set to 1, for the Source Code of GENJNL and Table ID 18 (Customer).
A user selects customer 10000 and then selects G/L account 6100 as the balancing account on a single
journal line. When the user posts the entry, what happens?
A.The entry will not post
B.Region is West, Department is Sales
C.Region is blank, Department is Sales
D.Region is blank, Department is Administration
Answer:A
Microsoft過去問 MB7-839問題集 MB7-839過去問 MB7-839
NO.5 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. There are two Application Method options on the Customer Card: Manual or
Apply to Oldest. When you post a payment to a customers account that is set up with Apply to Oldest as
the Application Method, what happens?
A.The payment is automatically applied to the oldest of the customers open entries
B.A page opens where the oldest entry is selected; the user is able to select a different entry
C.A page opens where the oldest entry is selected; the user is not able to select a different entry.
D.When the Auto Apply check box is selected in Sales Receivables Setup, the payment is automatically
applied to the oldest of the customers open entries.
Answer:A
Microsoft MB7-839 MB7-839過去問 MB7-839過去問 MB7-839
NO.6 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. You company receives a client and you??re appointed to assist the client. At
present the client intends to create budgets using Microsoft Office Excel. They want you to an overview of
the budget interface with Microsoft Excel. So what do you reply to him?
A.Export a budget from Microsoft Dynamics NAV for formatting purposes before creating a budget in
Microsoft Excel.
B.The exported budget displays in Microsoft Excel as a pivot table, providing users with a robust interface
for data entry
C.Enter the exported file name and worksheet name in the Import Budget from Excel batch job when
importing a previously exported budget.
D.The exported budget always displays the lines as G/L accounts; the columns are determined in the
Export Budget to Excel batch job
Answer:A C D
Microsoft MB7-839 MB7-839問題集 MB7-839認定証
NO.7 You work in an international company which is called Wikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. When you activate an Additional Reporting Currency (ACY) and convert the
existing G/L Entries to ACY, what exchange rate(s) are used?
A.All entries are converted using the LCY to ACY exchange rate that exists at the work date
B.All entries are converted using the LCY to ACY exchange rate that exists at the Posting Date of the
oldest entry
C.All entries are converted using the LCY to ACY exchange rate for the date entered when you run the
batch job
D.All entries are converted using the LCY to ACY exchange rate that exists at the Posting Date of the
earliest entry
Answer:A
Microsoft過去問 MB7-839 MB7-839過去問
NO.8 You work in an international company which is called Wikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. Your company receives a big customer. In the company of the client, there're
twelve accounting clerks, an accounting manager, and a controller. In order to make the accounting clerks
only post transactions in the current period and the accounting manager and controller are able to post to
the entire calendar year, the controller wants to set up Microsoft Dynamics NAV. But the controller is not
clear about how to achieve this and asks for your help on setup. So what instructions should you provide
to the controller to finish the setup?
A.On the General FastTab of General Ledger Setup, enter dates for the entire year in the Allow Posting
From and Allow Posting To fields; in the User Setup page, add entries for the accounting clerks and then
select the Current Period check box
B.On the General FastTab of General Ledger Setup, enter dates for the current period in the Allow
Posting From and Allow Posting To fields; in the User Setup page, add lines for the accounting manager
and controller and then select the Current Year check box
C.On the General FastTab of General Ledger Setup, enter dates for the current period in the Allow
Posting From and Allow Posting To fields; in the User Setup page, add lines for the accounting manager
and controller, and then enter dates for the entire year in the Allow Posting From and Allow Posting To
fields.
D.On the General FastTab of General Ledger Setup, leave the Allow Posting From and Allow Posting To
fields blank to indicate the current period; in the User Setup page, add entries for the accounting manager
and controller, and then enter dates for the entire year in the Allow Posting From and Allow Posting To
fields.
Answer:
NO.9 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. Microsoft Dynamics NAV has the functionality of reversing Customer Ledger
Entries. When you reverse Customer Ledger Entries, what restrictions are enforced?
A.The Customer Ledger Entry must not be applied
B.The total amount of G/L Entries must equal zero
C.Bank Ledger Entries must be closed by reconciliation
D.Only entries with the Journal Batch Name filled in can be reversed
Answer:A B D
Microsoft過去問 MB7-839 MB7-839 MB7-839
NO.10 You work in an international company which is called Wikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. In order to create an audit trail, when a transaction is posted, an entry is
made to the G/L Register table. What information is assigned in the G/L Register? (choose more than one)
A.A Register Number to the transaction
B.A Transaction Number to the transaction.
C.A Line Number to each line within a transaction.
D.An Entry Number to each line within a transaction
Answer:A D
Microsoft MB7-839 MB7-839練習問題
NO.11 You work in an international company which is called Wikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. Two date fields are available when you run the Suggest Vendor Payments
batch job. The two date fields are Last Payment Date and Posting Date. The entry in the Posting Date
field is used by the batch job as the Posting Date on the Payment Journal lines. Do you know what the
Last Payment Date field on the batch job is used for?
A.The Last Payment Date field on the batch job is used to indicate the last time the batch job was run
B.The Last Payment Date field on the batch job is used to identify the last payment due date in the Vendor
Ledger Entries to include in the batch process
C.The Last Payment Date field on the batch job is used to display the Posting Date used the last time
checks were issued based on the Vendor Ledger Entries suggested by the batch process.
D.The Last Payment Date field on the batch job is used to display the contents of the Allow Posting To
Date field for the user running the batch process, ensuring that the user is able to post the entries
included in the batch process.
Answer:B
Microsoft認証試験 MB7-839 MB7-839 MB7-839問題集
NO.12 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. According to the requirement of your company, you have to create G/L Budgets.
In the options below, which method can you use to perform this? (choose more than one)
A.You can copy from an existing budget.
B.You can import a budget in XML format.
C.You can enter each budget line manually.
D.You can import a budget from Microsoft Office Excel
Answer:A C D
Microsoft MB7-839練習問題 MB7-839
NO.13 You work in an international company which is called Wikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. There's a colleague in your company. He has no idea about access which
page to run the Close Year batch job and asks for your advice. So what do you reply to him?
A.Close Year
B.Fiscal Year
C.Accounting Periods
D.General Ledger Setup
Answer:C
Microsoft認定証 MB7-839 MB7-839 MB7-839練習問題
NO.14 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. Accounting Periods are set up to define the periods used by a company for
posting entries. In the options below, which is available for setting up Accounting Periods? (choose more
than one)
A.Accounting Periods can be set up manually
B.Accounting Periods can be set up automatically
C.Accounting Periods can be set up automatically when a year is closed.
D.Accounting Periods can be set up for 365 periods, each one day in length.
Answer:A B D
Microsoft MB7-839 MB7-839 MB7-839 MB7-839認証試験 MB7-839認証試験
NO.15 You work in an international company which is called Wikigo. And you?0?30??4re employed as the
Developer for Microsoft Dynamics NAV. Your company receives a big customer. The client has set up a
dimension for Office. The client purchased 80 laptops for use at each department. The controller
calculated the monthly depreciation for the current year at 100 for each vehicle, for a total of 8,000. Look
at the following table: The depreciation amount may change next year. The controller is setting up a
Recurring Journal to record the monthly depreciation, notices the Allocated Amount (LCY) field and calls
you to discuss how to best set up the entry. What instructions should you provide to the Controller on how
to set up the Recurring Journal and the Allocation?
A.On the Recurring General Journal page, leave the Amount field blank; on the Allocations page, add a
line for each Office dimension and then enter the Monthly Depreciation in the Amount field.
B.On the Recurring General Journal page, leave the Amount field blank; on the Allocations page, add a
line for each Office dimension and then enter the Vehicle Count in the Allocation Quantity field
C.On the Recurring General Journal page, enter 8,000 in the Amount field; on the Allocations page, add a
line for each Office dimension and then enter the Vehicle Count in the Allocation Quantity field.
D.On the Recurring General Journal page, enter 8,000 in the Amount field; on the Allocations page, add a
line for each Office dimension and then enter the Monthly Depreciation in the Amount field
Answer:C
Microsoft MB7-839 MB7-839 MB7-839問題集 MB7-839認定証
NO.16 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. There is a colleague named Jason in your company. He is printing the
Dimensions - Detail report. He is not clear about what the Include Dimensions field can be used for and
asks for your advice. So what do you reply to him?
A.The Include Dimensions field is used to preview dimension conflicts prior to running the report.
B.The Include Dimensions field is used to assign levels to the dimensions chosen to print on the report.
C.The Include Dimensions field is used to choose dimensions to include from the list of dimensions linked
to the Analysis View.
D.The Include Dimensions field is used to choose the dimensions to include from the list of all dimensions
set up in Microsoft Dynamics NAV.
Answer:B C
Microsoft認証試験 MB7-839 MB7-839 MB7-839
NO.17 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. You company receives a client and you??re appointed to assist the client. The
client set up multiple banks with various currencies, including one for the local currency. Sales documents
using the various currencies were prepared and posted. The client is processing activity in the Cash
Receipt Journal and experiencing problems posting the journal. The client wants to know the
requirements for posting the Cash Receipt Journal with multiple currencies. So what do you reply to the
client? (choose more than one)
A.You can only post entries using LCY when using a Bank Account with a blank Currency Code
B.You can post entries with any Currency Code including LCY when using a Bank Account with a blank
Currency Code.
C.You can post entries with any Currency Code include LCY when using a Bank Account with a Currency
Code assigned
D.You can only post lines with the same Currency Code as the bank when using a Bank Account with a
Currency Code assigned
Answer:B D
Microsoft MB7-839 MB7-839 MB7-839認定証
NO.18 You work in an international company which is called Wiikigo. And you're employed as the Developer for
Microsoft Dynamics NAV. Various fields are shown on Customer Ledger Entries for amounts including
Amount, Original Amount, and Remaining Amount. Where is additional information about these fields
available?
A.Additional information about these fields available is available in Analysis View Entries
B.Additional information about these fields available is available in Detailed Amount Ledger Entries
C.Additional information about these fields available is available in Detailed Analysis View Entries.
D.Additional information about these fields available is available in Detailed Customer Ledger Entries.
Answer:D
Microsoft MB7-839 MB7-839認定試験 MB7-839過去問
NO.19 You work in an international company which is called Wiikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. In Microsoft Office Excel, you are exporting data from an Analysis View to a
pivot table. During this process, what are the limitations? (choose more than one)
A.Numeric account numbers are always sorted as numbers in Microsoft Office Excel 2007
B.Because they do not have posted activity, totaling Accounts and Totaling Dimensions do not have
amounts
C.Because of a limitation in Microsoft Dynamics NAV 2009, analysis Views are able to only export 65,536
lines
D.Analysis Views with the View as field set to Balance at Date are not restricted to entries on or after the
starting date in the Date Filter field; they include all posted entries.
Answer:A B D
Microsoft MB7-839 MB7-839 MB7-839認定試験
NO.20 You work in an international company which is called Wikigo. And you're employed as the Developer
for Microsoft Dynamics NAV. In Microsoft Dynamics NAV, what are the two types of payment tolerance
that you can set up?
A.Payment Tolerance and Payment Receipt Tolerance
B.Payment Receipt Tolerance and Payment Tolerance
C.Payment Discount Tolerance and Payment Tolerance
D.Payment Application Tolerance and Payment Receipt Tolerance
Answer:C
Microsoft認定試験 MB7-839 MB7-839認定試験
Pass4Testは最新の00M-654試験問題集と高品質のJN0-380認定試験の問題と回答を提供します。Pass4TestのNS0-155 VCEテストエンジンと3I0-012試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のJN0-730トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论